Extended Length | Fractional | Metric


TOOL SELECTOR
CHIP
CLASS		MATERIAL MACHINEDTOOL TYPE
 20  NON-FERROUS - LONG CHIPS  416 
 40  NON-FERROUS - SHORT CHIPS  416 / 426 
 60  CAST IRONS  426 
 80  LOW STRENGTH STEELS  435 / 426 
 100  MEDIUM STRENGTH STEELS  435 
 120  HIGH STRENGTH STEELS  435 
 140  HIGH TEMPERATURE ALLOYS  435

Type 435 Metric - For Steels & Hight Temp Alloys
Carbide Tipped
  • Coolant outlets in each flute
  • Polished flutes; flute long carbide on .2841" tool diameter and larger
  • Geometry and carbide grade appropriate for material being machined
  • Carbide tips brazed to tough hardened alloy steel body
  • Polished flutes for easy chip flow
  • Precision ground cutting edges
  • Material specific reamer shanks are ground to next smallest shank diameter listed in NAS 897 if tool diameter is within .005" of shank diameter
 		  Modifications: (Prompt delivery)
  • Modified tool diameter - priced below
  • Closer tool diameter tolerance
  • Cutting diameter reduced for step or pilot
  • End chamfer other than 45º
  • End cutting or corner radius
  • Increased / decreased circular margin
  • Increased / decreased tool diameter back taper
  • Shortened shank or reduced shank diameter
  • Flat(s) or tang on shank
  • Coatings available:
     TITANIUM NITRIDE - TiN 
     TITANIUM CARBONITRIDE - TiCN 
     ZIRCONIUM NITRIDE - ZrN 
     AL TITANIUM NITRIDE - AITiN 
Use:
  • Flute coolant outlets for reaming thru holes as chips are flushed forward through the hole being reamed
  • Improves hole finish and permits higher feeds & speeds with longer tool life

Notes
  EDP No. 436045 - 435070 4.5 mm - 7.0 mm: 1/2" carbide length
Below is a list of standard Coolant Fed Reamers offered by Hannibal Carbide Tool. If you do not see the Coolant Fed Reamers you are looking for you can click here for our SPECIAL TOOL QUOTE REQUEST FORM and fax (573-221-1140) or email your request to Hannibal. Within 24 hours we will let you know how we can supply your Coolant Fed Reamers. For technical assistance with your Reamers please click here to fill out and submit our HANNIBAL TECHNICAL SUPPORT QUESTIONNAIRE.
Tool Diameter Type 435
EDP NO.		 Metric
Price		 Dimensions Finished To Modified Tool Diameter
Max. Shank Diam. No. of Flutes Length Modified Diameter Range (mm) Price Each - Based on Quantity Ordered
mm Inch Flute & Carbide Overall Low High 1 2 3 4 5-7 8-14 Over 14
4.5  .1772 435045 $113.60  .1704 4 1  1/4  5         4.4940 4.6960 $137.00 $121.50 $116.30 $113.75 $111.10 $108.95 $105.95
5.0  .1969 435050 113.60  .1805 4 1  1/4  5         4.6970 5.1820 137.00 121.50 116.30 113.75 111.10 108.95 105.95
5.5  .2165 435055 113.60  .2075 4 1  1/4  5         5.1830 5.6130 137.00 121.50 116.30 113.75 111.10 108.95 105.95
6.0  .2362 435060 113.60  .2265 4 1  1/2  6         5.6140 6.0450 137.00 121.50 116.30 113.75 111.10 108.95 105.95
—  .2480 435063  .2405 4 1  1/2  6         6.0460 6.4260 137.00 121.50 116.30 113.75 111.10 108.95 105.95
6.5  .2559 435065 115.95  .2485 4 1  1/2  6         6.4270 7.2140 139.35 123.80 118.60 116.05 113.45 111.30 108.35
7.0  .2756 435070 115.95  .2485 4 1  1/2  6         — — — — — — — — —
7.5  .2953 435075 124.90  .2792 4 1  1/2  6         7.2150 8.0010 148.30 132.80 127.55 125.05 122.45 120.25 117.30
8.0  .3150 435080 124.90  .2792 4 1  1/2  6         — — — — — — — — —
8.5  .3346 435085 124.90  .2792 4 1  1/2  6         8.0020 8.8140 148.30 132.80 127.55 125.05 122.45 120.25 117.30
9.0  .3543 435090 124.90  .3105 4 1  3/4  7         8.8150 9.6010 148.30 132.80 127.55 125.05 122.45 120.25 117.30
9.5  .3740 435095 124.90  .3105 4 1  3/4  7         — — — — — — — — —
10.0  .3937 435100 127.80  .3105 4 1  3/4  7         9.6020 10.3890 151.15 135.70 130.45 127.90 125.30 123.10 120.15
10.5  .4134 435105 130.65  .3730 6 1  3/4  7         10.3900 11.2010 154.00 138.55 133.30 130.75 128.15 126.00 123.00
11.0  .4331 435110 130.65  .3730 6 1  3/4  7         — — — — — — — — —
11.5  .4528 435115 130.65  .3730 6 1  3/4  7         11.2020 11.9890 154.00 138.55 133.30 130.75 128.15 126.00 123.00
12.0  .4724 435120 130.65  .4355 6 2         8         11.9900 12.7760 154.00 138.55 133.30 130.75 128.15 126.00 123.00
12.5  .4921 435125 130.65  .4355 6 2         8         — — — — — — — — —
13.0  .5118 435130 137.60  .4355 6 2         8         12.7770 13.5640 160.95 145.45 140.25 137.70 135.10 132.90 129.95
13.5  .5315 435135 137.60  .4355 6 2         8         — — — — — — — — —
14.0  .5512 435140 139.35  .4355 6 2         8         13.5650 14.3760 162.75 147.25 142.05 139.50 136.85 134.75 131.70
14.5  .5709 435145 140.55  .4355 6 2         8         14.3770 15.1640 164.00 148.45 143.20 140.65 138.05 135.90 132.90
15.0  .5906 435150 140.55  .4355 6 2         8         — — — — — — — — —
15.5  .6102 435155 140.55  .5615 6 2  1/4  9         15.1650 15.9510 164.00 148.45 143.20 140.65 138.05 135.90 132.90
16.0  .6299 435160 154.65  .5615 6 2  1/4  9         15.9520 16.7390 178.10 162.55 157.35 154.80 152.20 150.05 147.00
16.5  .6496 435165 154.65  .5615 6 2  1/4  9         — — — — — — — — —
17.0  .6693 435170 154.65  .5615 6 2  1/4  9         16.7400 17.5510 178.10 162.55 157.35 154.80 152.20 150.05 147.00
17.5  .6890 435175 154.65  .5615 6 2  1/4  9         — — — — — — — — —
18.0  .7087 435180 164.60  .5615 6 2  1/4  9         17.5520 18.3390 188.00 172.45 167.25 164.70 162.15 159.95 157.00
18.5  .7283 435185 164.60  .6245 6 2  1/2  9  1/2  18.3400 19.1260 188.00 172.45 167.25 164.70 162.15 159.95 157.00
19.0  .7480 435190 164.60  .6245 6 2  1/2  9  1/2  — — — — — — — — —
19.5  .7677 435195 164.60  .6245 6 2  1/2  9  1/2  19.1270 19.9140 188.00 172.45 167.25 164.70 162.15 159.95 157.00
20.0  .7874 435200 164.60  .6245 6 2  1/2  9  1/2  19.9150 20.7260 188.00 172.45 167.25 164.70 162.15 159.95 157.00
20.5  .8071 435205 164.60  .6245 6 2  1/2  9  1/2  — — — — — — — — —
21.0  .8268 435210 169.25  .6245 6 2  1/2  9  1/2  20.7270 21.5140 192.65 177.15 171.95 169.40 166.75 164.60 161.60
21.5  .8465 435215 169.25  .6245 6 2  1/2  9  1/2  — — — — — — — — —
22.0  .8661 435220 169.25  .7495 6 2  5/8  10         21.5150 22.3010 192.65 177.15 171.95 169.40 166.75 164.60 161.60
22.5  .8858 435225 195.90  .7495 6 2  5/8  10         22.3020 23.0890 220.15 204.05 198.65 196.00 193.35 191.05 188.00
23.0  .9055 435230 195.90  .7495 6 2  5/8  10         — — — — — — — — —
23.5  .9252 435235 200.20  .7495 8 2  5/8  10         23.0900 23.9010 224.45 208.35 202.95 200.30 197.60 195.35 192.30
24.0  .9449 435240 200.20  .7495 8 2  5/8  10         23.9020 24.6890 224.45 208.35 202.95 200.30 197.60 195.35 192.30
24.5  .9646 435245 200.20  .7495 8 2  5/8  10         — — — — — — — — —
25.0  .9843 435250 200.20  .8745 8 2  3/4  10  1/2  24.6900 25.4760 224.45 208.35 202.95 200.30 197.60 195.35 192.30
25.5 1.0039 435255 211.15  .8745 8 2  3/4  10  1/2  25.4770 27.0760 235.40 219.35 213.90 211.25 208.55 206.30 203.25
26.0 1.0236 435260 211.15  .8745 8 2  3/4  10  1/2  — — — — — — — — —
27.0 1.0630 435270 211.15  .8745 8 2  3/4  10  1/2  — — — — — — — — —
28.0 1.1024 435280 211.95  .8745 8 2  7/8  11         27.0770 28.6510 236.25 220.10 214.70 212.10 209.35 207.15 204.00
29.0 1.1417 435290 220.20  .9995 8 2  7/8  11         28.6520 30.2390 244.55 228.40 223.05 220.40 217.70 215.45 212.30
30.0 1.1811 435300 220.20  .9995 8 2  7/8  11         — — — — — — — — —
31.0 1.2205 435310 223.05  .9995 8 3         11  1/2  30.2400 31.8260 247.30 231.20 225.80 223.15 220.45 218.20 215.10
32.0 1.2598 435320 229.10  .9995 8 3         11  1/2  31.8270 33.4140 253.40 237.25 231.90 229.25 226.50 224.30 221.15
33.0 1.2992 435330 229.10  .9995 8 3         11  1/2  — — — — — — — — —
34.0 1.3386 435340 237.95  .9995 8 3  1/4  12         33.4150 35.0010 262.25 246.15 240.70 238.05 235.35 233.10 230.00
35.0 1.3780 435350 237.95  .9995 8 3  1/4  12         — — — — — — — — —
36.0 1.4173 435360 245.10  .9995 8 3  1/4  12         35.0020 36.5890 269.35 253.20 247.85 245.20 242.50 240.25 237.15
37.0 1.4567 435370 252.90 1.2495 8 3  1/2  12  1/2  36.5900 38.1760 277.20 261.10 255.70 253.05 250.35 248.10 244.95
38.0 1.4961 435380 252.90 1.2495 8 3  1/2  12  1/2  — — — — — — — — —
The specifications of the Coolant Fed Reamers listed above are only the dimensions that are critical to the application. Please choose the Reamers that meet your specific needs.

Everyone at Hannibal would like to THANK YOU for the privilege of servicing your Coolant Fed Reamers needs.