CUTTERS

DESCRIPTION FRACTIONAL METRIC
ARBOR HOLE TYPE CUTTERS    
     Double Angle    
          45° Included 750
          60° Included 752
          90° Included 754
     Shell End Mills    
          For Non-Ferrous 530
          For Cast Irons 531
          For Steels 532
     Side Milling    
          Straight Tooth for Non-Ferrous 540
          Straight Tooth for Cast Irons 541
          Straight Tooth for Steels 542
          Straight Tooth for High Temp Alloys 543
          Staggered Tooth for General Purpose 547
     Single Angle    
          45° Right 714
          45° Left 716
          60° Right 724
          60° Left 726
     Slitting Saws    
          Course Tooth    
               For Non-Ferrous 550
               For Cast Irons 552
               For Steels 554
               For High Temp Alloys 558
          Standard Tooth    
               For Non-Ferrous 551
               For Cast Irons 553
               For Steels 556
                    3" diameter any width .0600-.5312, radius, chamfers 556
                    4" diameter any width .0600-.5312, radius, chamfers 556
                    5" diameter any width .0704-.5312, radius, chamfers 556
                    6" diameter any width .0704-.5312, radius, chamfers 556
               For High Temp Alloys 559
               3" diameter any width .0600-.5312, radius, chamfers 559
               4" diameter any width .0600-.5312, radius, chamfers 559
               5" diameter any width .0704-.5312, radius, chamfers 559
               6" diameter any width .0704-.5312, radius, chamfers 559
SHANK TYPE CUTTERS    
     Chamfer Milling    
          45° for Non-Ferrous & Cast Irons / Steels 730/731
          60° for Non-Ferrous & Cast Irons / Steels 732/733
     Corner Rounding End Mills    
          For Non-Ferrous & Cast Irons / Steels 740/741
     Double Angle    
          60° for Non-Ferrous & Cast Irons / Steels 746/747
          90° for Non-Ferrous & Cast Irons / Steels 748/749
     Dovetail    
          45° for Non-Ferrous & Cast Irons / Steels 734/735
          60° for Non-Ferrous & Cast Irons / Steels 736/737
     Face Milling 536/537/538
     Keyseat    
          High Performance Straight Tooth for Aluminum 704
          Straight Tooth for Non-Ferrous & Cast Irons 700
          Staggered Tooth for Non-Ferrous & Cast Irons 701
          Straight Tooth for Steels 702
          Staggered Tooth for Steels 703
     Radius 718/719
     T-Slot 720/721