Fractional | Metric


TOOL SELECTOR
CHIP
CLASS		MATERIAL MACHINEDTOOL TYPE
 20  NON-FERROUS - LONG CHIPS  416 
 40  NON-FERROUS - SHORT CHIPS  416 / 426 
 60  CAST IRONS  426 
 80  LOW STRENGTH STEELS  435 / 426 
 100  MEDIUM STRENGTH STEELS  435 
 120  HIGH STRENGTH STEELS  435 
 140  HIGH TEMPERATURE ALLOYS  435

Type 435 Fractional - For Steels & Hight Temp Alloys
Carbide Tipped
  • Coolant outlets in each flute
  • Polished flutes; flute long carbide on .2841" tool diameter and larger
  • Geometry and carbide grade appropriate for material being machined
  • Carbide tips brazed to tough hardened alloy steel body
  • Polished flutes for easy chip flow
  • Precision ground cutting edges
  • Material specific reamer shanks are ground to next smallest shank diameter listed in NAS 897 if tool diameter is within .005" of shank diameter
 		  Modifications: (Prompt delivery)
  • Modified tool diameter - priced below
  • Closer tool diameter tolerance
  • Cutting diameter reduced for step or pilot
  • End chamfer other than 45º
  • End cutting or corner radius
  • Increased / decreased circular margin
  • Increased / decreased tool diameter back taper
  • Shortened shank or reduced shank diameter
  • Flat(s) or tang on shank
  • Coatings available:
     TITANIUM NITRIDE - TiN 
     TITANIUM CARBONITRIDE - TiCN 
     ZIRCONIUM NITRIDE - ZrN 
     AL TITANIUM NITRIDE - AITiN 
Use:
  • Flute coolant outlets for reaming thru holes as chips are flushed forward through the hole being reamed
  • Improves hole finish and permits higher feeds & speeds with longer tool life
Below is a list of standard Coolant Fed Reamers offered by Hannibal Carbide Tool. If you do not see the Coolant Fed Reamers you are looking for you can click here for our SPECIAL TOOL QUOTE REQUEST FORM and fax (573-221-1140) or email your request to Hannibal. Within 24 hours we will let you know how we can supply your Coolant Fed Reamers. For technical assistance with your Reamers please click here to fill out and submit our HANNIBAL TECHNICAL SUPPORT QUESTIONNAIRE.
Tool Diameter Type 435
EDP NO.		 Fractional
Price		 Dimensions Finished To Modified Tool Diameter
Max. Shank Diam. No. of Flutes Length Modified Diameter Range Price Each - Based on Quantity Ordered
Frac. Dec. Flute Carbide Overall Low High 1 2 3 4 5-7 8-14*
   3/16  .1875 43506 $146.85  .1805 4 1  1/4     1/2  5          .1770  .2040 $191.00 $169.00 $161.45 $157.95 $154.15 $151.10
  13/64  .2031 4352031 146.85  .1805 4 1  1/4     1/2  5         — — — — — — — —
   7/32  .2188 43507 146.85  .2075 4 1  1/4     1/2  5          .2041  .2210 191.00 169.00 161.45 157.95 154.15 151.10
  15/64  .2344 4352344 146.85  .2265 4 1  1/2     1/2  6          .2211  .2380 191.00 169.00 161.45 157.95 154.15 151.10
   1/4   .2500 43508 146.85  .2405 4 1  1/2     1/2  6          .2381  .2530 191.00 169.00 161.45 157.95 154.15 151.10
  17/64  .2656 4352656 150.15  .2485 4 1  1/2     1/2  6         — — — — — — — —
   9/32  .2813 43509 150.15  .2485 4 1  1/2     1/2  6          .2531  .2840 194.40 172.25 164.80 161.25 157.45 154.55
  19/64  .2969 4352969 162.90  .2792 4 1  1/2  1  1/2  6         — — — — — — — —
   5/16  .3125 43510 162.90  .2792 4 1  1/2  1  1/2  6          .2841  .3150 207.20 184.95 177.50 174.05 170.30 167.30
  21/64  .3281 4353281 162.90  .2792 4 1  1/2  1  1/2  6         — — — — — — — —
  11/32  .3438 43511 162.90  .2792 4 1  1/2  1  1/2  6          .3151  .3470 207.20 184.95 177.50 174.05 170.30 167.30
  23/64  .3594 4353594 162.90  .3105 4 1  3/4  1  3/4  7         — — — — — — — —
   3/8   .3750 43512 162.90  .3105 4 1  3/4  1  3/4  7          .3471  .3780 207.20 184.95 177.50 174.05 170.30 167.30
  25/64  .3906 4353906 166.90  .3105 4 1  3/4  1  3/4  7         — — — — — — — —
  13/32  .4063 43513 166.90  .3105 4 1  3/4  1  3/4  7          .3781  .4090 211.20 189.10 181.70 178.10 174.35 171.30
  27/64  .4219 4354219 171.00  .3730 6 1  3/4  1  3/4  7         — — — — — — — —
   7/16  .4375 43514 171.00  .3730 6 1  3/4  1  3/4  7          .4091  .4410 215.25 193.10 185.75 182.15 178.45 175.40
  29/64  .4531 4354531 171.00  .3730 6 1  3/4  1  3/4  7         — — — — — — — —
  15/32  .4688 43515 171.00  .3730 6 1  3/4  1  3/4  7          .4411  .4720 215.25 193.10 185.75 182.15 178.45 175.40
  31/64  .4844 4354844 171.00  .4355 6 2         2         8         — — — — — — — —
   1/2   .5000 43516 171.00  .4355 6 2         2         8          .4721  .5030 215.25 193.10 185.75 182.15 178.45 175.40
  33/64  .5156 4355156 180.90  .4355 6 2         2         8         — — — — — — — —
  17/32  .5313 43517 180.90  .4355 6 2         2         8          .5031  .5340 225.05 203.00 195.60 192.10 188.20 185.25
   9/16  .5625 43518 183.50  .4355 6 2         2         8          .5341  .5660 227.65 205.60 198.05 194.55 190.75 187.75
  19/32  .5938 43519 185.10  .4355 6 2         2         8          .5661  .5970 229.30 207.25 199.80 196.25 192.45 189.45
   5/8   .6250 43520 185.10  .5615 6 2  1/4  2  1/4  9          .5971  .6280 229.30 207.25 199.80 196.25 192.45 189.45
  21/32  .6563 43521 205.20  .5615 6 2  1/4  2  1/4  9          .6281  .6590 249.55 227.30 219.85 216.40 212.50 209.65
  11/16  .6875 43522 205.20  .5615 6 2  1/4  2  1/4  9          .6591  .6910 249.55 227.30 219.85 216.40 212.50 209.65
  23/32  .7188 43523 219.30  .5615 6 2  1/4  2  1/4  9          .6911  .7220 263.50 241.40 234.00 230.45 226.60 223.60
   3/4   .7500 43524 219.30  .6245 6 2  1/2  2  1/2  9  1/2   .7221  .7530 263.50 241.40 234.00 230.45 226.60 223.60
  25/32  .7813 43525 219.30  .6245 6 2  1/2  2  1/2  9  1/2   .7531  .7840 263.50 241.40 234.00 230.45 226.60 223.60
  13/16  .8125 43526 219.30  .6245 6 2  1/2  2  1/2  9  1/2   .7841  .8160 263.50 241.40 234.00 230.45 226.60 223.60
  27/32  .8438 43527 225.95  .6245 6 2  1/2  2  1/2  9  1/2   .8161  .8470 270.10 248.10 240.50 237.05 233.30 230.20
   7/8   .8750 43528 234.50  .7495 6 2  5/8  2  5/8  10          .8471  .8780 280.35 257.30 249.65 245.95 242.10 238.95
  29/32  .9063 43529 263.25  .7495 6 2  5/8  2  5/8  10          .8781  .9090 309.10 286.15 278.50 274.75 270.75 267.75
  15/16  .9375 43530 269.45  .7495 8 2  5/8  2  5/8  10          .9091  .9410 315.20 292.30 284.55 280.90 276.90 273.90
  31/32  .9688 43531 269.45  .7495 8 2  5/8  2  5/8  10          .9411  .9720 315.20 292.30 284.55 280.90 276.90 273.90
1         1.0000 43532 269.45  .8745 8 2  3/4  2  3/4  10  1/2   .9721 1.0030 315.20 292.30 284.55 280.90 276.90 273.90
1  1/16 1.0625 43534 284.85  .8745 8 2  3/4  2  3/4  10  1/2  1.0031 1.0660 330.75 307.90 300.15 296.45 292.50 289.50
1  1/8  1.1250 43536 286.10  .8745 8 2  7/8  2  7/8  11         1.0661 1.1280 332.00 308.95 301.20 297.60 293.70 290.55
1  3/16 1.1875 43538 297.90  .9995 8 2  7/8  2  7/8  11         1.1281 1.1905 343.80 320.75 313.00 309.45 305.55 302.45
1  1/4  1.2500 43540 301.75  .9995 8 3         3         11  1/2  1.1906 1.2530 347.75 324.70 317.00 313.40 309.45 306.40
1  5/16 1.3125 43542 310.45  .9995 8 3         3         11  1/2  1.2531 1.3155 356.40 333.35 325.65 321.90 318.05 315.00
1  3/8  1.3750 43544 323.05  .9995 8 3  1/4  3  1/4  12         1.3156 1.3780 368.95 345.85 338.25 334.60 330.65 327.45
1  7/16 1.4375 43546 333.05  .9995 8 3  1/4  3  1/4  12         1.3781 1.4405 379.10 356.00 348.40 344.75 340.75 337.70
1  1/2  1.5000 43548 344.25 1.2495 8 3  1/2  3  1/2  12  1/2  1.4406 1.5030 390.20 367.20 359.55 355.85 351.90 348.80
1  9/16 1.5625 43550 387.05 1.2495 8 3  1/2  3  1/2  12  1/2  1.5031 1.5660 430.80 408.90 401.55 398.15 394.25 391.40
1  5/8  1.6250 43552 425.55 1.2495 8 3  1/2  3  1/2  13         1.5661 1.6280 469.30 447.50 440.05 436.60 432.80 429.95
1 11/16 1.6875 43554 432.95 1.2495 8 3  1/2  3  1/2  13         1.6281 1.6910 476.70 454.85 447.50 444.00 440.15 437.35
1  3/4  1.7500 43556 473.15 1.2495 10 3  1/2  3  1/2  13  1/2  1.6911 1.7530 516.90 495.00 487.60 484.20 480.45 477.45
1 13/16 1.8125 43558 492.70 1.4995 10 3  1/2  3  1/2  13  1/2  1.7531 1.8160 536.40 514.55 507.15 503.65 499.90 497.05
1  7/8  1.8750 43560 518.70 1.4995 10 3  1/2  3  1/2  14         1.8161 1.8780 562.50 540.55 533.25 529.80 525.95 523.05
1 15/16 1.9375 43562 551.85 1.4995 10 3  1/2  3  1/2  14         1.8781 1.9410 595.55 573.75 566.30 562.85 559.05 556.20
2         2.0000 43564 571.85 1.4995 12 3  1/2  3  1/2  14         1.9411 2.0030 615.60 593.75 586.40 582.95 579.05 576.25
* Quantities of 15 or more - price of fractional size in same size range

The specifications of the Coolant Fed Reamers listed above are only the dimensions that are critical to the application. Please choose the Reamers that meet your specific needs.

Everyone at Hannibal would like to THANK YOU for the privilege of servicing your Coolant Fed Reamers needs.