Fractional | Metric


TOOL SELECTOR
CHIP
CLASS		MATERIAL MACHINEDTOOL TYPE
 20  NON-FERROUS - LONG CHIPS  407 
 40  NON-FERROUS - SHORT CHIPS  407 / 408 
 60  CAST IRONS  408 
 80  LOW STRENGTH STEELS  409 / 408 
 100  MEDIUM STRENGTH STEELS  409 
 120  HIGH STRENGTH STEELS  409 
 140  HIGH TEMPERATURE ALLOYS  409

National Aerospace Standards - NAS 897
Type 409 Metric - For Steels & High Temp Alloys
Carbide Tipped
  • Type "C" with short carbide tip
  • Straight polished flutes and straight shank
  • Geometry and carbide grade appropriate for material being machined
  • Carbide tips brazed to tough hardened alloy steel body
  • Polished flutes for easy chip flow
  • Precision ground cutting edges
  • Material specific reamer shanks are ground to next smallest shank diameter listed in NAS 897 if tool diameter is within .005" of shank diameter
 		  Modifications: (Prompt delivery)
  • Modified tool diameter - priced below
  • Closer tool diameter tolerance
  • Cutting diameter reduced for step or pilot
  • End chamfer other than 45º
  • End cutting or corner radius
  • Increased / decreased circular margin
  • Increased / decreased tool diameter back taper
  • Shortened shank or reduced shank diameter
  • Flat(s) or tang on shank
  • Coatings available:
     TITANIUM NITRIDE - TiN 
     TITANIUM CARBONITRIDE - TiCN 
     ZIRCONIUM NITRIDE - ZrN 
     AL TITANIUM NITRIDE - AITiN 

Notes
  Tool diameter in millimeters (mm); all other dimensions in inches
Below is a list of standard Material Specific Chucking Reamers offered by Hannibal Carbide Tool. If you do not see the Material Specific Chucking Reamers you are looking for you can click here for our SPECIAL TOOL QUOTE REQUEST FORM and fax (573-221-1140) or email your request to Hannibal. Within 24 hours we will let you know how we can supply your Material Specific Chucking Reamers. For technical assistance with your Reamers please click here to fill out and submit our HANNIBAL TECHNICAL SUPPORT QUESTIONNAIRE.
Tool Diameter Type 409
EDP NO.		 Metric
Price		 Dimensions Finished To Modified Tool Diameter
Max. Shank Diam. No. of Flutes Length Modified Diameter Range (mm) Price Each - Based on Quantity Ordered
mm Inch Flute Carbide Overall Low High 1 2 3 4 5-7 8-14 Over 14
4.0  .1575 409040 $49.20  .1510 4 1            1/2  4         3.9620 4.4930 $71.05 $56.55 $51.75 $49.35 $46.90 $44.90 $42.10
4.5  .1772 409045 45.70  .1704 4 1  1/8     1/2  4  1/2  4.4940 4.6960 66.95 52.85 48.10 45.80 43.45 41.50 38.75
5.0  .1969 409050 45.70  .1805 4 1  1/8     1/2  4  1/2  4.6970 5.1820 66.95 52.85 48.10 45.80 43.45 41.50 38.75
5.5  .2165 409055 45.70  .2075 4 1  1/4     1/2  5         5.1830 5.6130 66.95 52.85 48.10 45.80 43.45 41.50 38.75
6.0  .2362 409060 47.90  .2265 4 1  1/2     1/2  6         5.6140 6.0450 69.15 55.05 50.30 48.00 45.65 43.65 40.95
– – 409063 –  .2405 4 1  1/2     1/2  6         6.0460 6.4260 67.20 53.10 48.35 46.05 43.65 41.70 39.00
6.5  .2559 409065 46.70  .2485 4 1  1/2     1/2  6         6.4270 7.2140 67.95 53.85 49.10 46.80 44.40 42.45 39.75
7.0  .2756 409070 46.70  .2485 4 1  1/2     1/2  6         — — — — — — — — —
7.5  .2953 409075 46.70  .2792 4 1  1/2     1/2  6         7.2150 8.0010 67.95 53.85 49.10 46.80 44.40 42.45 39.75
7.5  .2953 409078 50.35  .2792 6 1  1/2     1/2  6         7.2150 8.0010 71.65 57.55 52.80 50.50 48.10 46.15 43.45
8.0  .3150 409083 50.35  .2792 6 1  1/2     1/2  6         — — — — — — — — —
8.0  .3150 409080 46.70  .2792 4 1  1/2     1/2  6         — — — — — — — — —
8.5  .3346 409085 48.05  .2792 4 1  1/2     5/8  6         8.0020 8.8140 69.30 55.25 50.50 48.20 45.80 43.85 41.15
8.5  .3346 409088 51.90  .2792 6 1  1/2     5/8  6         8.0020 8.8140 73.15 59.05 54.35 52.00 49.60 47.65 44.95
9.0  .3543 409090 44.10  .3105 4 1  3/4     5/8  7         8.8150 9.6010 63.60 50.65 46.30 44.20 42.05 40.25 37.75
9.0  .3543 409093 47.60  .3105 6 1  3/4     5/8  7         8.8150 9.6010 67.10 54.15 49.80 47.70 45.55 43.75 41.25
9.5  .3740 409095 44.10  .3105 4 1  3/4     5/8  7         — — — — — — — — —
9.5  .3740 409098 47.60  .3105 6 1  3/4     5/8  7         — — — — — — — — —
10.0  .3937 409100 49.95  .3105 4 1  3/4     5/8  7         9.6020 10.3890 71.20 57.10 52.35 50.05 47.65 45.70 43.00
10.0  .3937 409103 52.65  .3105 6 1  3/4     5/8  7         9.6020 10.3890 73.90 59.80 55.05 52.75 50.35 48.40 45.70
10.5  .4134 409105 52.65  .3730 6 1  3/4     5/8  7         10.3900 11.2010 73.90 59.80 55.05 52.75 50.35 48.40 45.70
11.0  .4331 409110 52.65  .3730 6 1  3/4     5/8  7         — — — — — — — — —
11.5  .4528 409115 53.25  .3730 6 1  3/4     5/8  7         11.2020 11.9890 74.50 60.40 55.70 53.35 51.00 49.05 46.30
12.0  .4724 409120 62.20  .4355 6 2            5/8  8         11.9900 12.7760 85.60 70.05 64.85 62.35 59.75 57.55 54.60
12.5  .4921 409125 62.20  .4355 6 2            5/8  8         — — — — — — — — —
13.0  .5118 409130 66.80  .4355 6 2            5/8  8         12.7770 13.5640 90.20 74.70 69.45 66.90 64.30 62.10 59.15
13.5  .5315 409135 66.80  .4355 6 2            5/8  8         — — — — — — — — —
14.0  .5512 409140 66.80  .4355 6 2            5/8  8         13.5650 14.3760 90.20 74.70 69.45 66.90 64.30 62.10 59.15
14.5  .5709 409145 69.05  .4355 6 2            5/8  8         14.3770 15.1640 92.50 76.95 71.75 69.20 66.55 64.45 61.45
15.0  .5906 409150 69.05  .4355 6 2            5/8  8         — — — — — — — — —
15.5  .6102 409155 69.05  .5615 6 2  1/4     5/8  9         15.1650 15.9510 92.50 76.95 71.75 69.20 66.55 64.45 61.45
16.0  .6299 409160 70.05  .5615 6 2  1/4     5/8  9         15.9520 16.7390 93.50 77.95 72.75 70.25 67.65 65.45 62.45
16.5  .6496 409165 70.05  .5615 6 2  1/4     5/8  9         — — — — — — — — —
17.0  .6693 409170 70.05  .5615 6 2  1/4     5/8  9         16.7400 17.5510 93.50 77.95 72.75 70.25 67.65 65.45 62.45
17.5  .6890 409175 70.05  .5615 6 2  1/4     5/8  9         — — — — — — — — —
18.0  .7087 409180 72.90  .5615 6 2  1/4     5/8  9         17.5520 18.3390 96.30 80.75 75.60 73.05 70.40 68.25 65.25
19.0  .7480 409190 72.90  .6245 6 2  1/2     3/4  9  1/2  18.3400 19.1260 96.30 80.75 75.60 73.05 70.40 68.25 65.25
19.5  .7677 409195 74.95  .6245 6 2  1/2     3/4  9  1/2  19.1270 19.9140 98.30 82.80 77.60 75.05 72.45 70.30 67.30
20.0  .7874 409200 74.95  .6245 6 2  1/2     3/4  9  1/2  19.9150 20.7260 98.30 82.80 77.60 75.05 72.45 70.30 67.30
21.0  .8268 409210 77.55  .6245 6 2  1/2     3/4  9  1/2  20.7270 21.5140 100.90 85.45 80.20 77.65 75.05 72.90 69.90
22.0  .8661 409220 77.55  .7495 6 2  5/8     3/4  10         21.5150 22.3010 100.90 85.45 80.20 77.65 75.05 72.90 69.90
23.0  .9055 409230 91.95  .7495 6 2  5/8     3/4  10         22.3020 23.0890 116.20 100.10 94.70 92.05 89.40 87.10 84.05
23.5  .9252 409235 91.95  .7495 8 2  5/8     3/4  10         23.0900 23.9010 116.20 100.10 94.70 92.05 89.40 87.10 84.05
24.0  .9449 409240 95.75  .7495 8 2  5/8     3/4  10         23.9020 24.6890 120.05 103.95 98.55 95.90 93.15 90.95 87.85
25.0  .9843 409250 95.75  .8745 8 2  3/4     3/4  10  1/2  24.6900 25.4760 120.05 103.95 98.55 95.90 93.15 90.95 87.85
26.0 1.0236 409260 98.35  .8745 8 2  3/4     3/4  10  1/2  25.4770 27.0760 121.60 106.20 101.05 98.50 95.85 93.70 90.75
27.0 1.0630 409270 98.35  .8745 8 2  3/4     3/4  10  1/2  — — — — — — — — —
28.0 1.1024 409280 105.50  .8745 8 2  7/8     7/8  11         27.0770 28.6510 128.75 113.35 108.15 105.60 103.00 100.85 97.90
29.0 1.1417 409290 110.40  .9995 8 2  7/8     7/8  11         28.6520 30.2390 133.65 118.20 113.05 110.50 107.90 105.75 102.80
30.0 1.1811 409300 110.40  .9995 8 2  7/8     7/8  11         — — — — — — — — —
31.0 1.2205 409310 116.05  .9995 8 3            7/8  11  1/2  30.2400 31.8260 139.30 123.90 118.75 116.20 113.60 111.45 108.45
32.0 1.2598 409320 121.60  .9995 8 3            7/8  11  1/2  31.8270 33.4140 144.95 129.45 124.30 121.75 119.20 117.05 114.00
33.0 1.2992 409330 121.60  .9995 8 3            7/8  11  1/2  — — — — — — — — —
34.0 1.3386 409340 128.35  .9995 8 3  1/4     7/8  12         33.4150 35.0010 151.70 136.25 131.05 128.55 125.95 123.80 120.80
35.0 1.3780 409350 128.35  .9995 8 3  1/4     7/8  12         — — — — — — — — —
36.0 1.4173 409360 141.95  .9995 8 3  1/4     7/8  12         35.0020 36.5890 165.20 149.75 144.60 142.05 139.50 137.35 134.35
37.0 1.4567 409370 149.45 1.2495 8 3  1/2     7/8  12  1/2  36.5900 38.1760 172.75 157.30 152.15 149.60 147.00 144.85 141.85
The specifications of the Material Specific Chucking Reamers listed above are only the dimensions that are critical to the application. Please choose the Reamers that meet your specific needs.

Everyone at Hannibal would like to THANK YOU for the privilege of servicing your Material Specific Chucking Reamers needs.