Fractional


Type 304 Fractional - Four or Six Straight Flutes
Carbide Tipped
  • More flutes for improved finish
  • Use when machine horsepower allows for a higher chip capacity end mill
  • Radial edged for longer tool life
  • Geometry and carbide grade, O.D. relief and end clearance appropriate for material being machined
  • Flute long carbide tips brazed to tough hardened alloy steel body
  • Straight shanks have standard Weldon drive flats
  • Non-center cutting end mills have the ends cleared to depth of carbide
 		  Modifications: (Prompt delivery)
  • Modified tool diameter
  • Metric tool diameter
  • Cutting diameter reduced for step or pilot
  • Corner chamfer or corner radius
  • Shortened shank or reduced shank diameter
  • Additional shank drive flat(s)
  • Coolant outlets
  • Stocked coated tools priced below
  • Coatings available:
    •  TITANIUM NITRIDE - TiN 
     TITANIUM CARBONITRIDE - TiCN 
     ZIRCONIUM NITRIDE - ZrN 
     AL TITANIUM NITRIDE - AITiN 

Notes
  When ordering stocked coated tools, specify TiN, TiCN or TiAIN after EDP No.
Below is a list of standard Straight Flutes End Mills offered by Hannibal Carbide Tool. If you do not see the Straight Flutes End Mills you are looking for you can click here for our SPECIAL TOOL QUOTE REQUEST FORM and fax (573-221-1140) or email your request to Hannibal. Within 24 hours we will let you know how we can supply your Straight Flutes End Mills. For technical assistance with your End Mills please click here to fill out and submit our HANNIBAL TECHNICAL SUPPORT QUESTIONNAIRE.
Tool Diameter Dimensions Type 304
EDP NO.		 Price
Shank Diameter No. of Flutes Length
Frac. Dec. Carbide Overall
   1/4   .2500    3/8  4    1/2  2  1/2  30408 $40.50
   5/16  .3125    3/8  4    5/8  2  1/2  30410 43.25
   3/8   .3750    3/8  4    5/8  2  1/2  30412 45.60
   7/16  .4375    3/8  4 1         2 11/16 30414 45.60
   1/2   .5000    1/2  4 1         3  1/4  30416 46.70
   9/16  .5625    1/2  4 1         3  3/8  30418 52.45
   5/8   .6250    1/2  4 1         3  3/8  30420 54.90
  11/16  .6875    5/8  4 1         3  3/8  30422 60.45
   3/4   .7500    5/8  4 1         3  5/8  30424 56.50
  13/16  .8125    5/8  4 1         3  5/8  30426 66.75
   7/8   .8750    5/8  4 1  1/4  4         30428 66.75
  15/16  .9375    7/8  4 1  1/4  4         30430 74.10
1         1.0000    7/8  4 1  1/4  4         30432 77.15
1  1/8  1.1250 1         4 1  1/4  4  1/4  30436 87.50
1  1/4  1.2500 1         4 1  1/4  4  1/4  30440 98.35
1  1/2  1.5000 1  1/4  4 1  1/2  4  1/2  30448 126.80
1  3/4  1.7500 1  1/4  6 1  1/2  4  1/2  30456 163.45
2         2.0000 1  1/4  6 1  1/2  4  1/2  30464 188.30
The specifications of the Straight Flutes End Mills listed above are only the dimensions that are critical to the application. Please choose the End Mills that meet your specific needs.

Everyone at Hannibal would like to THANK YOU for the privilege of servicing your Straight Flutes End Mills needs.