Hannibal Carbide Tool Inc.

Search

• PRODUCTS
• Spotlight
• Company Profile
• Advantages
• Request Info
• Tech Support
• Contact Us

• Reamers
  • Coolant Fed
  • Extended Length
  • General Purpose
  • Material Specific
  • Pipe Tap
  • Semi-Finished
  • Shell Reamers & Arbors
  • Step
  • Solid Carbide
• Drills
  • Aircraft Extension
  • Coolant Fed
  • Core
  • Glass & Tile
  • Hard Steel Die
  • Jobbers Length
  • Masonry
  • Reduced Shank Diameter
  • Spotting/Centering (CNC)
  • Stub Length (CNC)
  • Taper Length
  • Taper Shank
• Counterbores
  • Aircraft
  • Capscrew
  • Pilots
  • Straight Shank
  • Taper Shank
  • Stub Length
• Milling Cutters
  • Arbor Hole Type
  • Shank Type
• End Mills
  • Center Cutting
  • Coolant Fed
  • High Spiral Shear Cutting
  • Slow Spiral
  • Straight Flutes
• Port Contour
  Cutters
  • A.N.D. 10050 Integral Reamer Pilot
  • ISO 6149-1 Metric Port w/o I.D. Groove
  • Metric Port Reamer Pilot Series
  • MS33649 Integral Reamer Pilot
  • S.A.E. - MS16142 - J514F - J1926
• Centers
  • Brown & Sharpe
  • Jarno
  • Morse
• Countersinks
  • Single Flute
  • Three Flute
• Single Points
  • Premium C2
  • Premium C5 - C6
  • S.A. Series Swiss Automatic Tool

Fractional | Metric | Reduced Shank Fractional

TOOL SELECTOR CHIP CLASS MATERIAL MACHINED TOOL TYPE  20   NON-FERROUS - LONG CHIPS   600   40   NON-FERROUS - SHORT CHIPS   600 / 601   60   CAST IRONS   601 / 600   80   LOW STRENGTH STEELS   CALL US   100   MEDIUM STRENGTH STEELS   CALL US   120   HIGH STRENGTH STEELS   CALL US   140   HIGH TEMPERATURE ALLOYS   CALL US
Type 601 Metric - 135º Split Point Carbide Tipped 135º split point designed for drilling tough abrasive or high tensile materials Carbide tip high temperature brazed to hardened tool steel body Smooth flutes for effective chip flow Precision ground to insure concentricity of tip & body All dimensional & element tolerances conform to one of: ASME/ANSI B94.11M ISO - International Organization for Standardization NAS 907 - National Aerospace Standards USCTI - United States Cutting Tool Institute (formerly MCTI)		Modifications: (Prompt delivery) Modified tool diameter Modified metric tool diameter Modified point and / or angle Reduced shank diameter Flat(s) on shank Tanged shank Coatings available:  TITANIUM NITRIDE - TiN   TITANIUM CARBONITRIDE - TiCN   ZIRCONIUM NITRIDE - ZrN   AL TITANIUM NITRIDE - AITiN
Use: The most popular carbide tipped drill - will perform satisfactorily under a variety of conditions

Below is a list of standard Jobbers Length Drills offered by Hannibal Carbide Tool. If you do not see the Jobbers Length Drills you are looking for you can click here for our SPECIAL TOOL QUOTE REQUEST FORM and fax (573-221-1140) or email your request to Hannibal. Within 24 hours we will let you know how we can supply your Jobbers Length Drills. For technical assistance with your Drills please click here to fill out and submit our HANNIBAL TECHNICAL SUPPORT QUESTIONNAIRE.

Tool Diameter		Length				Type 601 EDP NO.	Metric Price
		Flute		Overall
mm	Inch	mm	Inch	mm	Inch
3.0	.1181	41.0	1  5/8	70.0	2  3/4	601030	$14.75
3.1	.1220	41.0	1  5/8	70.0	2  3/4	601031	15.30
3.2	.1260	41.0	1  5/8	70.0	2  3/4	601032	15.30
3.3	.1299	44.0	1  3/4	73.0	2  7/8	601033	15.30
3.4	.1339	44.0	1  3/4	73.0	2  7/8	601034	15.30
3.5	.1378	44.0	1  3/4	73.0	2  7/8	601035	14.45
3.6	.1417	48.0	1  7/8	76.0	3	601036	14.75
3.7	.1457	48.0	1  7/8	76.0	3	601037	14.75
3.8	.1496	48.0	1  7/8	76.0	3	601038	14.75
3.9	.1535	51.0	2	79.0	3  1/8	601039	14.75
4.0	.1575	54.0	2  1/8	83.0	3  1/4	601040	13.95
4.1	.1614	54.0	2  1/8	83.0	3  1/4	601041	14.90
4.2	.1654	54.0	2  1/8	83.0	3  1/4	601042	14.90
4.3	.1693	54.0	2  1/8	83.0	3  1/4	601043	14.90
4.4	.1732	56.0	2  3/16	86.0	3  3/8	601044	14.90
4.5	.1772	56.0	2  3/16	86.0	3  3/8	601045	14.90
4.6	.1811	56.0	2  3/16	86.0	3  3/8	601046	15.95
4.7	.1850	59.0	2  5/16	89.0	3  1/2	60313	14.10
4.8	.1890	59.0	2  5/16	89.0	3  1/2	60312	14.75
4.9	.1929	62.0	2  7/16	92.0	3  5/8	601049	15.95
5.0	.1969	62.0	2  7/16	92.0	3  5/8	601050	15.55
5.1	.2008	62.0	2  7/16	92.0	3  5/8	601051	16.65
5.2	.2047	64.0	2  1/2	95.0	3  3/4	601052	16.65
5.3	.2087	64.0	2  1/2	95.0	3  3/4	601053	16.65
5.4	.2126	64.0	2  1/2	95.0	3  3/4	601054	16.65
5.5	.2165	64.0	2  1/2	95.0	3  3/4	601055	16.20
5.6	.2205	67.0	2  5/8	98.0	3  7/8	601056	17.15
5.7	.2244	67.0	2  5/8	98.0	3  7/8	601057	17.15
5.8	.2283	67.0	2  5/8	98.0	3  7/8	601058	17.15
5.9	.2323	67.0	2  5/8	98.0	3  7/8	601059	17.15
6.0	.2362	70.0	2  3/4	102.0	4	601060	17.60
6.1	.2402	70.0	2  3/4	102.0	4	601061	18.05
6.2	.2441	70.0	2  3/4	102.0	4	601062	18.05
6.3	.2480	70.0	2  3/4	102.0	4	601063	18.05
6.4	.2520	73.0	2  7/8	105.0	4  1/8	601064	18.05
6.5	.2559	73.0	2  7/8	105.0	4  1/8	601065	17.60
6.6	.2598	73.0	2  7/8	105.0	4  1/8	601066	20.60
6.7	.2638	73.0	2  7/8	105.0	4  1/8	601067	20.60
6.8	.2677	73.0	2  7/8	105.0	4  1/8	601068	20.60
6.9	.2717	73.0	2  7/8	105.0	4  1/8	601069	20.60
7.0	.2756	73.0	2  7/8	105.0	4  1/8	601070	20.60
7.1	.2795	75.0	2 15/16	108.0	4  1/4	601071	20.60
7.2	.2835	75.0	2 15/16	108.0	4  1/4	601072	20.60
7.3	.2874	75.0	2 15/16	108.0	4  1/4	601073	20.60
7.4	.2913	78.0	3  1/16	111.0	4  3/8	601074	22.30
7.5	.2953	78.0	3  1/16	111.0	4  3/8	601075	22.30
7.6	.2992	78.0	3  1/16	111.0	4  3/8	601076	22.30
7.7	.3031	81.0	3  3/16	114.0	4  1/2	601077	22.30
7.8	.3071	81.0	3  3/16	114.0	4  1/2	601078	22.30
7.9	.3110	81.0	3  3/16	114.0	4  1/2	601079	22.30
8.0	.3150	81.0	3  3/16	114.0	4  1/2	601080	22.30
8.1	.3189	84.0	3  5/16	117.0	4  5/8	601081	23.75
8.2	.3228	84.0	3  5/16	117.0	4  5/8	601082	23.75
8.3	.3268	84.0	3  5/16	117.0	4  5/8	601083	23.75
8.4	.3307	87.0	3  7/16	121.0	4  3/4	601084	23.75
8.5	.3346	87.0	3  7/16	121.0	4  3/4	601085	23.75
8.6	.3386	87.0	3  7/16	121.0	4  3/4	601086	23.75
8.7	.3425	87.0	3  7/16	121.0	4  3/4	601087	23.75
8.8	.3465	89.0	3  1/2	124.0	4  7/8	601088	23.75
8.9	.3504	89.0	3  1/2	124.0	4  7/8	601089	25.30
9.0	.3543	89.0	3  1/2	124.0	4  7/8	601090	25.30
9.1	.3583	89.0	3  1/2	124.0	4  7/8	601091	25.30
9.2	.3622	92.0	3  5/8	127.0	5	601092	25.30
9.3	.3661	92.0	3  5/8	127.0	5	601093	25.30
9.4	.3701	92.0	3  5/8	127.0	5	601094	25.30
9.5	.3740	92.0	3  5/8	127.0	5	601095	25.30
9.6	.3780	95.0	3  3/4	130.0	5  1/8	601096	27.55
9.7	.3819	95.0	3  3/4	130.0	5  1/8	601097	27.55
9.8	.3858	95.0	3  3/4	130.0	5  1/8	601098	27.55
9.9	.3898	95.0	3  3/4	130.0	5  1/8	601099	27.55
10.0	.3937	95.0	3  3/4	130.0	5  1/8	601100	27.55
10.1	.3976	98.0	3  7/8	133.0	5  1/4	601101	28.40
10.2	.4016	98.0	3  7/8	133.0	5  1/4	601102	28.40
10.3	.4055	98.0	3  7/8	133.0	5  1/4	601103	28.40
10.4	.4094	98.0	3  7/8	133.0	5  1/4	601104	29.80
10.5	.4134	98.0	3  7/8	133.0	5  1/4	601105	29.80
10.6	.4173	100.0	3 15/16	137.0	5  3/8	601106	30.85
10.7	.4213	100.0	3 15/16	137.0	5  3/8	601107	30.85
10.8	.4252	103.0	4  1/16	140.0	5  1/2	601108	30.85
10.9	.4291	103.0	4  1/16	140.0	5  1/2	601109	30.85
11.0	.4331	103.0	4  1/16	140.0	5  1/2	601110	29.80
11.1	.4370	103.0	4  1/16	140.0	5  1/2	601111	34.35
11.2	.4409	106.0	4  3/16	143.0	5  5/8	601112	34.60
11.3	.4449	106.0	4  3/16	143.0	5  5/8	601113	34.60
11.4	.4488	106.0	4  3/16	143.0	5  5/8	601114	33.60
11.5	.4528	106.0	4  3/16	143.0	5  5/8	601115	33.60
11.6	.4567	110.0	4  5/16	146.0	5  3/4	601116	37.40
11.7	.4606	110.0	4  5/16	146.0	5  3/4	601117	37.40
11.8	.4646	110.0	4  5/16	146.0	5  3/4	601118	37.40
11.9	.4685	110.0	4  5/16	146.0	5  3/4	601119	37.40
12.0	.4724	111.0	4  3/8	149.0	5  7/8	601120	37.60
12.1	.4764	111.0	4  3/8	149.0	5  7/8	601121	38.85
12.2	.4803	111.0	4  3/8	149.0	5  7/8	601122	38.85
12.3	.4843	111.0	4  3/8	149.0	5  7/8	601123	38.85
12.4	.4882	114.0	4  1/2	152.0	6	601124	38.85
12.5	.4921	114.0	4  1/2	152.0	6	601125	37.60
12.6	.4961	114.0	4  1/2	152.0	6	601126	40.15
12.7	.5000	114.0	4  1/2	152.0	6	60132	35.55
12.8	.5039	114.0	4  1/2	152.0	6	601128	55.40
12.9	.5079	114.0	4  1/2	152.0	6	601129	55.40
13.0	.5118	114.0	4  1/2	152.0	6	601130	55.40
13.5	.5315	122.0	4 13/16	168.0	6  5/8	601135	60.75
14.0	.5512	122.0	4 13/16	168.0	6  5/8	601140	64.40
14.5	.5709	122.0	4 13/16	168.0	6  5/8	601145	69.20
15.0	.5906	132.0	5  3/16	181.0	7  1/8	601150	69.20
15.5	.6102	132.0	5  3/16	181.0	7  1/8	601155	70.05
16.0	.6299	132.0	5  3/16	181.0	7  1/8	601160	71.30
16.5	.6496	132.0	5  3/16	181.0	7  1/8	601165	71.30
17.0	.6693	143.0	5  5/8	194.0	7  5/8	601170	74.10
17.5	.6890	143.0	5  5/8	194.0	7  5/8	601175	74.10
18.0	.7087	143.0	5  5/8	194.0	7  5/8	601180	74.80
18.5	.7283	143.0	5  5/8	194.0	7  5/8	601185	75.30
19.0	.7480	148.0	5 13/16	203.0	8	601190	76.35

The specifications of the Jobbers Length Drills listed above are only the dimensions that are critical to the application. Please choose the Drills that meet your specific needs.

Everyone at Hannibal would like to THANK YOU for the privilege of servicing your Jobbers Length Drills needs.

Hannibal Carbide Tool, Inc.

Industrial Supply Association

Value Added Partner