Fractional | Metric


TOOL SELECTOR
CHIP
CLASS		MATERIAL MACHINEDTOOL TYPE
 20  NON-FERROUS - LONG CHIPS  620 or 622 
 40  NON-FERROUS - SHORT CHIPS  620 or 622 
 60  CAST IRONS  620 or 622 
 80  LOW STRENGTH STEELS  621 or 623 
 100  MEDIUM STRENGTH STEELS  621 or 623 
 120  HIGH STRENGTH STEELS  621 or 623 
 140  HIGH TEMPERATURE ALLOYS  620 or 622

Type 622 Metric - Taper Shank
Carbide Tipped
  • Four large right spiral polished flutes permit higher feeds and speeds - taper shank
  • Carbide tips brazed to hardened tool steel body
  • 118º included chamfer angle
  • Rigid design provides maximum support for the carbide tips
  • Tool diameter tolerance: plus .000", minus .001"
 		  Modifications: (Prompt delivery)
  • Modified tool diameter - priced below
  • Closer tool diameter tolerance
  • End chamfer other than 118º included angle
  • End cutting or corner radius
  • Shank whistle notch for set screw
  • Smaller taper shank
  • Coatings available:
    •  TITANIUM NITRIDE - TiN 
     TITANIUM CARBONITRIDE - TiCN 
     ZIRCONIUM NITRIDE - ZrN 
     AL TITANIUM NITRIDE - AITiN 
Use:
  • Designed for economically enlarging cored, punched, or drilled holes - can remove up to 30% of the tool diameter
  • The balanced cutting action of the core drill removes considerably more material than a reamer, often eliminating the need for a final reaming or boring operation

Notes
  EDP No. 622090 - 622119: 3 Flutes
  Tool diameter in millimeters (mm); all other dimensions in inches
Below is a list of standard Core Drills offered by Hannibal Carbide Tool. If you do not see the Core Drills you are looking for you can click here for our SPECIAL TOOL QUOTE REQUEST FORM and fax (573-221-1140) or email your request to Hannibal. Within 24 hours we will let you know how we can supply your Core Drills. For technical assistance with your Drills please click here to fill out and submit our HANNIBAL TECHNICAL SUPPORT QUESTIONNAIRE.
Tool Diameter Dimensions Type 622
EDP NO.		 Metric
Price		 Finished To Modified Tool Diameter
Min. Cut Diam. Taper Shank No. Length Modified Diameter Range (mm) Price Each - Based on Quantity Ordered
mm Inch Flute Carbide Overall Low High 1 2 3 4 5-7 8-14 Over 14
—   63/64 4 4  7/8  1         10  1/2  622359 $ 35.0020 35.7890 $184.20 $170.25 $165.50 $163.25 $160.90 $158.95 $156.25
—  .7660 4 4  7/8  1         10  1/2  622279 27.0770 27.8640 145.75 131.75 127.10 124.75 122.45 120.45 117.80
—  .6560 3 4  7/8     7/8  9  1/2  622239 23.0900 23.9010 122.10 108.10 103.45 101.10 98.80 96.85 94.20
—  .5470 2 4  3/8     7/8  8  1/4  622199 19.1270 19.9140 114.55 100.60 95.90 93.60 91.25 89.30 86.60
—  .4380 2 4  3/8     3/4  8  1/4  622159 15.1650 15.9510 111.05 97.10 92.40 90.10 87.75 85.80 83.10
—  .3280 1 4  1/8     3/4  7  1/2  622119 11.2020 11.9890 106.85 92.90 88.20 85.90 83.60 81.60 78.90
—    7/8  4 4  7/8  1         10  1/2  622319 31.0400 31.8260 160.95 146.95 142.30 140.05 137.65 135.75 133.05
9.0  .3543  .2620 1 3  1/2     5/8  6  3/4  622090 85.80 8.8150 9.6010 106.85 92.90 88.20 85.90 83.60 81.60 78.90
10.0  .3937  .2840 1 3  5/8     5/8  7         622100 85.80 9.6020 10.3890 106.85 92.90 88.20 85.90 83.60 81.60 78.90
11.0  .4331  .3060 1 3  7/8     3/4  7  1/4  622110 85.80 10.3900 11.2010 106.85 92.90 88.20 85.90 83.60 81.60 78.90
12.0  .4724  .3500 2 4  3/8     3/4  8  1/4  622120 85.80 11.9900 12.7760 106.85 92.90 88.20 85.90 83.60 81.60 78.90
13.0  .5118  .3720 2 4  3/8     3/4  8  1/4  622130 86.15 12.7770 13.5640 107.20 93.25 88.55 86.30 83.90 82.00 79.30
14.0  .5512  .3940 2 4  3/8     3/4  8  1/4  622140 86.15 13.5650 14.3760 107.20 93.25 88.55 86.30 83.90 82.00 79.30
15.0  .5906  .4160 2 4  3/8     3/4  8  1/4  622150 90.00 14.3770 15.1640 111.05 97.10 92.40 90.10 87.75 85.80 83.10
16.0  .6299  .4590 2 4  3/8     3/4  8  1/4  622160 90.95 15.9520 16.7390 112.05 98.05 93.35 91.05 88.70 86.75 84.10
17.0  .6693  .4810 2 4  3/8     7/8  8  1/4  622170 91.65 16.7400 17.5510 112.75 98.75 94.00 91.75 89.40 87.45 84.75
18.0  .7087  .5030 2 4  3/8     7/8  8  1/4  622180 91.65 17.5520 18.3390 112.75 98.75 94.00 91.75 89.40 87.45 84.75
19.0  .7480  .5250 2 4  3/8     7/8  8  1/4  622190 91.65 18.3400 19.1260 112.75 98.75 94.00 91.75 89.40 87.45 84.75
20.0  .7874  .5690 3 4  7/8     7/8  9  1/2  622200 95.80 19.9150 20.7260 116.85 102.95 98.20 95.95 93.60 91.65 88.95
21.0  .8268  .5910 3 4  7/8     7/8  9  1/2  622210 100.45 20.7270 21.5140 121.55 107.55 102.85 100.60 98.20 96.30 93.60
22.0  .8661  .6120 3 4  7/8     7/8  9  1/2  622220 100.45 21.5150 22.3010 121.55 107.55 102.85 100.60 98.20 96.30 93.60
23.0  .9055  .6340 3 4  7/8     7/8  9  1/2  622230 101.00 22.3020 23.0890 122.10 108.10 103.45 101.10 98.80 96.85 94.20
24.0  .9449  .6780 3 4  7/8     7/8  9  1/2  622240 104.40 23.9020 24.6890 125.45 111.50 106.80 104.50 102.20 100.20 97.50
25.0  .9843  .7000 3 4  7/8     7/8  9  1/2  622250 106.15 24.6900 25.4760 127.25 113.25 108.60 106.30 103.95 102.05 99.30
26.0 1.0236  .7220 3 4  7/8     7/8  9  1/2  622260 107.00 25.4770 26.2640 128.05 114.05 109.40 107.10 104.75 102.80 100.10
27.0 1.0630  .7440 3 4  7/8     7/8  9  1/2  622270 108.35 26.2650 27.0760 129.45 115.45 110.75 108.50 106.10 104.20 101.50
28.0 1.1024  .7870 4 4  7/8  1         10  1/2  622280 124.65 27.8650 28.6510 145.75 131.75 127.10 124.75 122.45 120.45 117.80
29.0 1.1417  .8090 4 4  7/8  1         10  1/2  622290 135.25 28.6520 29.4390 156.30 142.35 137.65 135.35 133.05 131.05 128.35
30.0 1.1811  .8310 4 4  7/8  1         10  1/2  622300 138.90 29.4400 30.2390 160.00 146.00 141.35 139.00 136.70 134.75 132.10
31.0 1.2205  .8530 4 4  7/8  1         10  1/2  622310 139.40 30.2400 31.0390 160.45 146.50 141.80 139.50 137.15 135.20 132.50
32.0 1.2598  .8970 4 4  7/8  1         10  1/2  622320 149.25 31.8270 32.6140 170.30 156.30 151.65 149.35 146.95 145.05 142.35
33.0 1.2992  .9190 4 4  7/8  1         10  1/2  622330 153.10 32.6150 33.4010 174.15 160.20 155.50 153.20 150.90 148.95 146.25
34.0 1.3386  .9400 4 4  7/8  1         10  1/2  622340 156.15 33.4020 34.2140 177.25 163.25 158.60 156.25 153.90 151.95 149.30
35.0 1.3780  .9620 4 4  7/8  1         10  1/2  622350 159.70 34.2150 35.0010 180.80 166.80 162.15 159.80 157.45 155.50 152.85
36.0 1.4173 1.0060 4 4  7/8  1         10  1/2  622360 167.65 35.7900 36.6010 188.75 174.75 170.10 167.75 165.40 163.45 160.80
37.0 1.4567 1.0250 4 4  7/8  1         10  1/2  622370 172.35 36.6020 37.3890 193.40 179.45 174.75 172.45 170.15 168.15 165.45
38.0 1.4961 1.0500 4 4  7/8  1         10  1/2  622380 175.85 37.3900 38.1760 196.90 182.95 178.25 175.95 173.65 171.65 168.95
The specifications of the Core Drills listed above are only the dimensions that are critical to the application. Please choose the Drills that meet your specific needs.

Everyone at Hannibal would like to THANK YOU for the privilege of servicing your Core Drills needs.