Type 457ST
Tools - Reamers - Step Reamers - Step Reamers with Straight Flutes

Chip ClassMaterial MachinedTool Type
20NON-FERROUS - LONG CHIPS457ST
40NON-FERROUS - SHORT CHIPS457ST / 458ST
60CAST IRONS458ST
80LOW STRENGTH STEELS459ST/458ST
100MEDIUM STRENGTH STEELS459ST
120HIGH STRENGTH STEELS459ST
140HIGH TEMPERATURE ALLOYS459ST

Description

  • Type "C" with flute long carbide
  • Straight polished flutes and straight shank
  • Longer flutes than Type 450 on .5971" tool diameter and larger for straight deep holes
  • Geometry and carbide grade appropriate for material being machined
  • Carbide tips brazed to tough hardened alloy steel body
  • Polished flutes for easy chip flow
  • Precision ground cutting edges
  • Material specific reamer shanks are ground to next smallest shank diameter listed in NAS 897 if tool diameter is within .005" of shank diameter

Modifications

  • Modified tool diameter - priced below
  • Metric tool diameter
  • Closer tool diameter tolerance
  • End chamfer other than 45º
  • End cutting or corner radius
  • Increased / decreased circular margin
  • Increased / decreased tool diameter back taper
  • Shortened shank or reduced shank diameter
  • Flat(s) or tang on shank
Coatings available:
  • TITANIUM NITRIDE - TiN
  • TITANIUM CARBONITRIDE - TiCN
  • ZIRCONIUM NITRIDE - ZrN
  • AL TITANIUM NITRIDE - AITiN
Tool Diameter RangeCarbide LengthDiameter Non Cut Pilot MinFlute LengthMax Shank DiameterNumber Of FlutesOverall LengthEDP
1.2531 - 1.315531.17830.9995811 1/245742ST
1.3156 - 1.37803 1/41.2373 1/40.999581245744ST
1.3781 - 1.44053 1/41.2963 1/40.999581245746ST
1.4406 - 1.50303 1/21.3553 1/21.2495812 1/245748ST
0.9721 - 1.00302 3/40.9142 3/40.8745810 1/245732ST
1.0031 - 1.06602 3/40.9432 3/40.8745810 1/245734ST
1.0661 - 1.12802 7/81.0022 7/80.874581145736ST
1.1281 - 1.19052 7/81.0612 7/80.999581145738ST
1.1906 - 1.253031.1230.9995811 1/245740ST
0.8161 - 0.84702 1/20.7672 1/20.624569 1/245727ST
0.8471 - 0.87802 5/80.7972 5/80.749561045728ST
0.8781 - 0.90902 5/80.8262 5/80.749561045729ST
0.9091 - 0.94102 5/80.8552 5/80.749581045730ST
0.9411 - 0.97202 5/80.8852 5/80.749581045731ST
0.2211 - 0.23801 1/20.2081 1/20.2265464572344ST
0.6911 - 0.72202 1/40.652 1/40.56156945723ST
0.7221 - 0.75302 1/20.6792 1/20.624569 1/245724ST
0.7531 - 0.78402 1/20.7082 1/20.624569 1/245725ST
0.7841 - 0.81602 1/20.7372 1/20.624569 1/245726ST
0.5341 - 0.566020.50220.43556845718ST
0.5661 - 0.597020.53220.43556845719ST
0.5971 - 0.62802 1/40.5612 1/40.56156945720ST
0.6281 - 0.65902 1/40.592 1/40.56156945721ST
0.6591 - 0.69102 1/40.622 1/40.56156945722ST
0.3781 - 0.40901 3/40.3551 3/40.31054745713ST
0.4091 - 0.44101 3/40.3851 3/40.3736745714ST
0.4411 - 0.47201 3/40.4151 3/40.3736745715ST
0.4721 - 0.503020.44420.43556845716ST
0.5031 - 0.534020.47320.43556845717ST
0.2381 - 0.25301 1/20.2241 1/20.24054645708ST
0.2531 - 0.28401 1/20.2381 1/20.24854645709ST
0.2841 - 0.31501 1/20.2671 1/20.27924645710ST
0.3151 - 0.34701 1/20.2961 1/20.27924645711ST
0.3471 - 0.37801 3/40.3261 3/40.31054745712ST
0.1770 - 0.20401 1/80.1661 1/80.180544 1/245706ST
0.2041 - 0.22101 1/40.1921 1/40.20754545707ST

Can't find the Reamers you need?

If you do not see the Reamers you are looking for click here to Request a Quote for the tool you need. For technical assistance with your Reamers please fill out our Hannibal Technical Support Questionnaire.

Search for products

Back to Top
Product has been added to your cart