Type 430 Semi Finished
Tools - Reamers - Semi Finished Reamers - Semi Finished Stub Length Reamers with Straight Flutes

Chip ClassMaterial MachinedTool Type
20NON-FERROUS - LONG CHIPS430 / 440
40NON-FERROUS - SHORT CHIPS430 / 440
60CAST IRONS430 / 440
80LOW STRENGTH STEELS440 / 430
100MEDIUM STRENGTH STEELS440 / 430
120HIGH STRENGTH STEELS440 / 430
140HIGH TEMPERATURE ALLOYS440 / 430
Before semi-finished reamers can be used, the tool diameter must be finish ground & relieved and the reamer end must be faced & chamfered. Semi-finished reamers are purchased by regrind shops, distributors, or users with regrind capabilities.

Description

  • Polished flutes; flute long carbide on .2841" tool diameter and larger
  • Straight shank fits into standard holders
  • Pin cross hole permits use in pin drive floating holders
  • Left spiral flutes should not be used on blind holes
  • Carbide tips brazed to tough hardened alloy steel body
  • Polished flutes for easy chip flow

Modifications

Coatings available:
  • TITANIUM NITRIDE - TiN
  • TITANIUM CARBONITRIDE - TiCN
  • ZIRCONIUM NITRIDE - ZrN
  • AL TITANIUM NITRIDE - AITiN
Tool Diameter RangeEDPPrice
1.4406 - 1.503043048SF $257.85
1.1281 - 1.190543038SF $155.00
1.1906 - 1.253043040SF $181.65
1.2531 - 1.315543042SF $181.65
1.3156 - 1.378043044SF $184.15
1.3781 - 1.440543046SF $214.70
0.9091 - 0.941043030SF $121.00
0.9411 - 0.972043031SF $121.00
0.9721 - 1.003043032SF $127.05
1.0031 - 1.066043034SF $127.05
1.0661 - 1.128043036SF $148.65
0.7531 - 0.784043025SF $92.60
0.7841 - 0.816043026SF $100.60
0.8161 - 0.847043027SF $100.60
0.8471 - 0.878043028SF $109.95
0.8781 - 0.909043029SF $109.95
0.6281 - 0.659043021SF $86.35
0.6591 - 0.691043022SF $90.30
0.2211 - 0.23804302344SF $47.75
0.6911 - 0.722043023SF $90.30
0.7221 - 0.753043024SF $92.60
0.4721 - 0.503043016SF $79.70
0.5031 - 0.534043017SF $79.70
0.5341 - 0.566043018SF $84.10
0.5661 - 0.597043019SF $84.10
0.5971 - 0.628043020SF $86.35
0.3151 - 0.347043011SF $56.00
0.3471 - 0.378043012SF $60.65
0.3781 - 0.409043013SF $61.45
0.4091 - 0.441043014SF $72.90
0.4411 - 0.472043015SF $72.90
0.1770 - 0.204043006SF $47.75
0.2041 - 0.221043007SF $47.75
0.2381 - 0.253043008SF $47.75
0.2531 - 0.284043009SF $47.75
0.2841 - 0.315043010SF $55.40

Can't find the Reamers you need?

If you do not see the Reamers you are looking for click here to Request a Quote for the tool you need. For technical assistance with your Reamers please fill out our Hannibal Technical Support Questionnaire.

Search for products

Back to Top
Product has been added to your cart