Type 435h6 Fractional
Tools - Reamers - h6 Shank Reamers - h6 Shank Reamers with Straight Flutes and Flute Fed Coolant

Chip ClassMaterial MachinedTool Type
20NON-FERROUS - LONG CHIPS416h6
40NON-FERROUS - SHORT CHIPS416h6 / 426h6
60CAST IRONS426h6
80LOW STRENGTH STEELS435h6 / 426h6
100MEDIUM STRENGTH STEELS435h6
120HIGH STRENGTH STEELS435h6
140HIGH TEMPERATURE ALLOYS435h6

Description

  • Coolant outlets in each flute
  • Flute long carbide
  • Polished flutes
  • Tool geometry and carbide appropriate for material being machined.

Modifications

  • End chamfer other than 45°
  • End cutting or corner radius
  • Increased/Decreased back taper
  • Closer tool diameter tolerance (.0001")
  • Cutting diameter reduced for step or pilot (Some modifications may affect the TIR)
Coatings available:
  • TITANIUM NITRIDE - TiN
  • TITANIUM CARBONITRIDE - TiCN
  • ZIRCONIUM NITRIDE - ZrN
  • AL TITANIUM NITRIDE - AITiN

Use

  • Flute coolant outlets for reaming thru holes as chips are flushed forward through the hold being reamed
  • Improves hole finish and permits higher feeds and speeds with longer tool life
Tool Diameter RangeFlute LengthMax Shank DiameterNumber Of FlutesOverall LengthShank DiameterEDP
0.9411 - 0.97202 5/8863/443531h6
0.9721 - 1.00302 3/4867/843532h6
0.8781 - 0.90902 5/8663/443529h6
0.9091 - 0.94102 5/8863/443530h6
0.7841 - 0.81602 1/2665/843526h6
0.8161 - 0.84702 1/2665/843527h6
0.8471 - 0.87802 5/8663/443528h6
0.7221 - 0.75302 1/20.6256643524h6
0.7531 - 0.78402 1/2665/843525h6
0.6591 - 0.69102 1/40.56256643522h6
0.6911 - 0.72202 1/40.56256643523h6
0.5661 - 0.597020.43756643519h6
0.5971 - 0.62802 1/40.56256643520h6
0.6281 - 0.65902 1/40.56256643521h6
0.5031 - 0.534020.43756643517h6
0.5341 - 0.566020.43756643518h6
0.4721 - 0.503020.43756643516h6
0.4091 - 0.44101 3/40.3756543514h6
0.4411 - 0.47201 3/40.3756543515h6
0.3471 - 0.37801 3/40.31254543512h6
0.3781 - 0.40901 3/40.31254543513h6
Menu

Search for products

Back to Top
Product has been added to your cart