Type 414h6 Fractional
Tools - Reamers - h6 Shank Reamers - h6 Shank Reamers with Straight Flutes and Center Coolant Outlet

Chip ClassMaterial MachinedTool Type
20NON-FERROUS - LONG CHIPS414h6
40NON-FERROUS - SHORT CHIPS414h6 / 424h6
60CAST IRONS424h6
80LOW STRENGTH STEELS434h6 / 424h6
100MEDIUM STRENGTH STEELS434h6
120HIGH STRENGTH STEELS434h6
140HIGH TEMPERATURE ALLOYS434h6

Description

  • Center coolant outlet
  • Flute long carbide
  • Polished flutes
  • Tool geometry and carbide appropriate for material being machined.

Modifications

  • End chamfer other than 45°
  • End cutting or corner radius
  • Increased/Decreased back taper
  • Closer tool diameter tolerance (.0001")
  • Cutting diameter reduced for step or pilot (Some modifications may affect the TIR)
Coatings available:
  • TITANIUM NITRIDE - TiN
  • TITANIUM CARBONITRIDE - TiCN
  • ZIRCONIUM NITRIDE - ZrN
  • AL TITANIUM NITRIDE - AITiN

Use

  • Center coolant outlet for reaming blind holes as chips are flushed back towards the shank
  • Improves hole finish and permits higher feeds and speeds with longer tool life
Tool Diameter RangeFlute LengthMax Shank DiameterNumber Of FlutesOverall LengthShank DiameterEDP
0.9411 - 0.97202 5/8863/441431h6
0.9721 - 1.00302 3/4867/841432h6
0.7841 - 0.81602 1/2665/841426h6
0.8161 - 0.84702 1/2665/841427h6
0.8471 - 0.87802 5/8663/441428h6
0.8781 - 0.90902 5/8663/441429h6
0.9091 - 0.94102 5/8863/441430h6
0.6911 - 0.72202 1/40.56256641423h6
0.7221 - 0.75302 1/20.6256641424h6
0.7531 - 0.78402 1/2665/841425h6
0.6281 - 0.65902 1/40.56256641421h6
0.6591 - 0.69102 1/40.56256641422h6
0.5341 - 0.566020.43756641418h6
0.5661 - 0.597020.43756641419h6
0.5971 - 0.62802 1/40.56256641420h6
0.5031 - 0.534020.43756641417h6
0.4411 - 0.47201 3/40.3756541415h6
0.4721 - 0.503020.43756641416h6
0.3781 - 0.40901 3/40.31254541413h6
0.4091 - 0.44101 3/40.3756541414h6
0.3471 - 0.37801 3/40.31254541412h6
Menu

Search for products

Back to Top
Product has been added to your cart