Type 429h6 FractionalTools - Reamers - h6 Shank Reamers - h6 Shank Reamers with Left Spiral Flutes and Flute Fed Coolant for Through Holes
| Chip Class | Material Machined | Tool Type |
|---|---|---|
| 20 | NON-FERROUS - LONG CHIPS | 427h6 |
| 40 | NON-FERROUS - SHORT CHIPS | 427h6 / 428h6 |
| 60 | CAST IRONS | 428h6 |
| 80 | LOW STRENGTH STEELS | 429h6 / 428h6 |
| 100 | MEDIUM STRENGTH STEELS | 429h6 |
| 120 | HIGH STRENGTH STEELS | 429h6 |
| 140 | HIGH TEMPERATURE ALLOYS | 429h6 |
Description
- Coolant outlets in each flute
- Flute long carbide
- Polished flutes
- Tool geometry and carbide appropriate for material being machined.
Modifications
- End chamfer other than 45°
- End cutting or corner radius
- Increased/Decreased back taper
- Closer tool diameter tolerance (.0001")
- Cutting diameter reduced for step or pilot (Some modifications may affect the TIR)
Coatings available:
- TITANIUM NITRIDE - TiN
- TITANIUM CARBONITRIDE - TiCN
- ZIRCONIUM NITRIDE - ZrN
- AL TITANIUM NITRIDE - AITiN
Use
- Flute coolant outlets for reaming thru holes as chips are flushed forward through the hold being reamed
- Improves hole finish and permits higher feeds and speeds with longer tool life
| Tool Diameter Range | Flute Length | Number Of Flutes | Overall Length | Shank Diameter | EDP | 0.9721 - 1.0030 | 2 3/4 | 8 | 6 | 7/8 | 42932h6 | 0.9091 - 0.9410 | 2 5/8 | 8 | 6 | 3/4 | 42930h6 | 0.9411 - 0.9720 | 2 5/8 | 8 | 6 | 3/4 | 42931h6 | 0.8161 - 0.8470 | 2 1/2 | 6 | 6 | 5/8 | 42927h6 | 0.8471 - 0.8780 | 2 5/8 | 6 | 6 | 3/4 | 42928h6 | 0.8781 - 0.9090 | 2 5/8 | 6 | 6 | 3/4 | 42929h6 | 0.7531 - 0.7840 | 2 1/2 | 6 | 6 | 5/8 | 42925h6 | 0.7841 - 0.8160 | 2 1/2 | 6 | 6 | 5/8 | 42926h6 | 0.6911 - 0.7220 | 2 1/4 | 6 | 6 | 9/16 | 42923h6 | 0.7221 - 0.7530 | 2 1/2 | 6 | 6 | 5/8 | 42924h6 | 0.5971 - 0.6280 | 2 1/4 | 6 | 6 | 9/16 | 42920h6 | 0.6281 - 0.6590 | 2 1/4 | 6 | 6 | 9/16 | 42921h6 | 0.6591 - 0.6910 | 2 1/4 | 6 | 6 | 9/16 | 42922h6 | 0.5341 - 0.5660 | 2 | 6 | 6 | 7/16 | 42918h6 | 0.5661 - 0.5970 | 2 | 6 | 6 | 7/16 | 42919h6 | 0.4721 - 0.5030 | 2 | 6 | 6 | 7/16 | 42916h6 | 0.5031 - 0.5340 | 2 | 6 | 6 | 7/16 | 42917h6 | 0.3781 - 0.4090 | 1 3/4 | 4 | 5 | 5/16 | 42913h6 | 0.4091 - 0.4410 | 1 3/4 | 6 | 5 | 3/8 | 42914h6 | 0.4411 - 0.4720 | 1 3/4 | 6 | 5 | 3/8 | 42915h6 | 0.3471 - 0.3780 | 1 3/4 | 4 | 5 | 5/16 | 42912h6 |
Can't find the Reamers you need?
If you do not see the Reamers you are looking for click here to Request a Quote for the tool you need. For technical assistance with your Reamers please fill out our Hannibal Technical Support Questionnaire.