Type 443EL
Tools - Reamers - Extended Length Reamers - Extended Length Reamers with Right Spiral Flutes and Flute Long Carbide

Chip ClassMaterial MachinedTool Type
20NON-FERROUS - LONG CHIPS442EL
40NON-FERROUS - SHORT CHIPS442EL / 443EL
60CAST IRONS443EL
80LOW STRENGTH STEELS444EL / 443EL
100MEDIUM STRENGTH STEELS444EL
120HIGH STRENGTH STEELS444EL
140HIGH TEMPERATURE ALLOYS444EL

Description

  • All Extended length reamers provided with controlled shank
  • Must specify overall length when ordering (centers supplied only at maximum overall length)

Modifications

  • Modified tool diameter - priced below
  • Metric tool diameter
  • Closer tool diameter tolerance
  • Cutting diameter reduced for step or pilot
  • End chamfer other than 45º
  • End cutting or corner radius
  • Increased / decreased circular margin
  • Increased / decreased tool diameter back taper
  • Shortened shank or reduced shank diameter
  • Flat(s) or tang on shank
Coatings available:
  • TITANIUM NITRIDE - TiN
  • TITANIUM CARBONITRIDE - TiCN
  • ZIRCONIUM NITRIDE - ZrN
  • AL TITANIUM NITRIDE - AITiN
Tool Diameter RangeFlute LengthMax Shank DiameterNumber Of FlutesOverall Length RangeShank DiameterEDP
0.8781 - 0.90902 5/8610 1/32 - 183/444329EL
0.9091 - 0.94102 5/8810 1/32 - 183/444330EL
0.9411 - 0.97202 5/8810 1/32 - 183/444331EL
0.9721 - 1.00302 3/4810 17/32 - 187/844332EL
0.7531 - 0.78402 1/269 17/32 - 185/844325EL
0.7841 - 0.81602 1/269 17/32 - 185/844326EL
0.8161 - 0.84702 1/269 17/32 - 185/844327EL
0.8471 - 0.87802 5/8610 1/32 - 183/444328EL
0.7221 - 0.75302 1/20.624569 17/32 - 1844324EL
0.6591 - 0.69102 1/40.561569 1/32 - 1844322EL
0.6911 - 0.72202 1/40.561569 1/32 - 1844323EL
0.5661 - 0.597020.435568 1/32 - 1644319EL
0.5971 - 0.62802 1/40.561569 1/32 - 1844320EL
0.6281 - 0.65902 1/40.561569 1/32 - 1844321EL
0.5031 - 0.534020.435568 1/32 - 1644317EL
0.5341 - 0.566020.435568 1/32 - 1644318EL
0.4091 - 0.44101 3/40.373067 1/32 - 1444314EL
0.4411 - 0.47201 3/40.373067 1/32 - 1444315EL
0.4721 - 0.503020.435568 1/32 - 1644316EL
0.3471 - 0.37801 3/40.310547 1/32 - 1444312EL
0.3781 - 0.40901 3/40.310547 1/32 - 1444313EL
0.2211 - 0.25301 1/20.219346 1/32 - 1244308EL
0.2531 - 0.28401 1/20.250546 1/32 - 1244309EL
0.2841 - 0.31501 1/20.279246 1/32 - 1244310EL
0.3151 - 0.34701 1/20.279246 1/32 - 1244311EL

Can't find the Reamers you need?

If you do not see the Reamers you are looking for click here to Request a Quote for the tool you need. For technical assistance with your Reamers please fill out our Hannibal Technical Support Questionnaire.

Search for products

Back to Top
Product has been added to your cart