Type 416ELTools - Reamers - Extended Length Coolant Fed Reamers - Extended Length Coolant Fed Reamers with Straight Flutes and Flute Long Carbide
| Chip Class | Material Machined | Tool Type |
|---|---|---|
| 20 | NON-FERROUS - LONG CHIPS | 416EL |
| 40 | NON-FERROUS - SHORT CHIPS | 416EL |
Description
- Coolant outlets in each flute
- For thru holes
- Straight flutes
- All Extended length reamers provided with controlled shank
- Must specify overall length when ordering (centers supplied only at maximum overall length)
Modifications
- Modified tool diameter - priced below
- Closer tool diameter tolerance
- Cutting diameter reduced for step or pilot
- End chamfer other than 45º
- End cutting or corner radius
- Increased / decreased circular margin
- Increased / decreased tool diameter back taper
- Shortened shank or reduced shank diameter
- Flat(s) or tang on shank
Coatings available:
- TITANIUM NITRIDE - TiN
- TITANIUM CARBONITRIDE - TiCN
- ZIRCONIUM NITRIDE - ZrN
- AL TITANIUM NITRIDE - AITiN
| Tool Diameter Range | Flute Length | Max Shank Diameter | Number Of Flutes | Overall Length Range | Shank Diameter | EDP | 0.9411 - 0.9720 | 2 5/8 | 8 | 10 1/32 - 18 | 3/4 | 41631EL | 0.9721 - 1.0030 | 2 3/4 | 8 | 10 17/32 - 18 | 7/8 | 41632EL | 0.8471 - 0.8780 | 2 5/8 | 6 | 10 1/32 - 18 | 3/4 | 41628EL | 0.8781 - 0.9090 | 2 5/8 | 6 | 10 1/32 - 18 | 3/4 | 41629EL | 0.9091 - 0.9410 | 2 5/8 | 8 | 10 1/32 - 18 | 3/4 | 41630EL | 0.7841 - 0.8160 | 2 1/2 | 6 | 9 17/32 - 18 | 5/8 | 41626EL | 0.8161 - 0.8470 | 2 1/2 | 6 | 9 17/32 - 18 | 5/8 | 41627EL | 0.7531 - 0.7840 | 2 1/2 | 6 | 9 17/32 - 18 | 5/8 | 41625EL | 0.7221 - 0.7530 | 2 1/2 | 0.6245 | 6 | 9 17/32 - 18 | 41624EL | 0.6591 - 0.6910 | 2 1/4 | 0.5615 | 6 | 9 1/32 - 18 | 41622EL | 0.6911 - 0.7220 | 2 1/4 | 0.5615 | 6 | 9 1/32 - 18 | 41623EL | 0.6281 - 0.6590 | 2 1/4 | 0.5615 | 6 | 9 1/32 - 18 | 41621EL | 0.5661 - 0.5970 | 2 | 0.4355 | 6 | 8 1/32 - 16 | 41619EL | 0.5971 - 0.6280 | 2 1/4 | 0.5615 | 6 | 9 1/32 - 18 | 41620EL | 0.5341 - 0.5660 | 2 | 0.4355 | 6 | 8 1/32 - 16 | 41618EL | 0.4721 - 0.5030 | 2 | 0.4355 | 6 | 8 1/32 - 16 | 41616EL | 0.5031 - 0.5340 | 2 | 0.4355 | 6 | 8 1/32 - 16 | 41617EL | 0.4411 - 0.4720 | 1 3/4 | 0.3730 | 6 | 7 1/32 - 14 | 41615EL | 0.4091 - 0.4410 | 1 3/4 | 0.3730 | 6 | 7 1/32 - 14 | 41614EL | 0.3781 - 0.4090 | 1 3/4 | 0.3105 | 4 | 7 1/32 - 14 | 41613EL | 0.3151 - 0.3470 | 1 1/2 | 0.2792 | 4 | 6 1/32 - 12 | 41611EL | 0.3471 - 0.3780 | 1 3/4 | 0.3105 | 4 | 7 1/32 - 14 | 41612EL | 0.2531 - 0.2840 | 1 1/2 | 0.2505 | 4 | 6 1/32 - 12 | 41609EL | 0.2841 - 0.3150 | 1 1/2 | 0.2792 | 4 | 6 1/32 - 12 | 41610EL | 0.1751 - 0.1910 | 1 1/2 | 0.1724 | 4 | 4 17/32 - 9 | 41606EL | 0.1911 - 0.2210 | 1 1/2 | 0.1880 | 4 | 5 1/32 - 10 | 41607EL | 0.2211 - 0.2530 | 1 1/2 | 0.2193 | 4 | 6 1/32 - 12 | 41608EL |
Can't find the Reamers you need?
If you do not see the Reamers you are looking for click here to Request a Quote for the tool you need. For technical assistance with your Reamers please fill out our Hannibal Technical Support Questionnaire.