Type 413ELTools - Reamers - Extended Length Coolant Fed Reamers - Extended Length Coolant Fed Reamers with Right Spiral Flutes and Flute Long Carbide For Blind Holes
| Chip Class | Material Machined | Tool Type |
|---|---|---|
| 20 | NON-FERROUS - LONG CHIPS | 411EL |
| 40 | NON-FERROUS - SHORT CHIPS | 411EL / 413EL |
| 60 | CAST IRONS | 413EL |
| 80 | LOW STRENGTH STEELS | 415EL / 413EL |
| 100 | MEDIUM STRENGTH STEELS | 415EL |
| 120 | HIGH STRENGTH STEELS | 415EL |
| 140 | HIGH TEMPERATURE ALLOYS | 415EL |
Description
- Coolant hole through the center
- All Extended length reamers provided with controlled shank
- Must specify overall length when ordering (centers supplied only at maximum overall length)
Modifications
- Modified tool diameter - priced below
- Metric tool diameter
- Closer tool diameter tolerance
- Cutting diameter reduced for step or pilot
- End chamfer other than 45º
- End cutting or corner radius
- Increased / decreased circular margin
- Increased / decreased tool diameter back taper
- Shortened shank or reduced shank diameter
- Flat(s) or tang on shank
Coatings available:
- TITANIUM NITRIDE - TiN
- TITANIUM CARBONITRIDE - TiCN
- ZIRCONIUM NITRIDE - ZrN
- AL TITANIUM NITRIDE - AITiN
| Tool Diameter Range | Flute Length | Max Shank Diameter | Number Of Flutes | Overall Length Range | Shank Diameter | EDP | 0.9411 - 0.9720 | 2 5/8 | 8 | 10 1/32 - 18 | 3/4 | 41331EL | 0.9721 - 1.0030 | 2 3/4 | 8 | 10 17/32 - 18 | 7/8 | 41332EL | 0.8471 - 0.8780 | 2 5/8 | 6 | 10 1/32 - 18 | 3/4 | 41328EL | 0.8781 - 0.9090 | 2 5/8 | 6 | 10 1/32 - 18 | 3/4 | 41329EL | 0.9091 - 0.9410 | 2 5/8 | 8 | 10 1/32 - 18 | 3/4 | 41330EL | 0.7841 - 0.8160 | 2 1/2 | 6 | 9 17/32 - 18 | 5/8 | 41326EL | 0.8161 - 0.8470 | 2 1/2 | 6 | 9 17/32 - 18 | 5/8 | 41327EL | 0.7531 - 0.7840 | 2 1/2 | 6 | 9 17/32 - 18 | 5/8 | 41325EL | 0.7221 - 0.7530 | 2 1/2 | 0.6245 | 6 | 9 17/32 - 18 | 41324EL | 0.6911 - 0.7220 | 2 1/4 | 0.5615 | 6 | 9 1/32 - 18 | 41323EL | 0.6281 - 0.6590 | 2 1/4 | 0.5615 | 6 | 9 1/32 - 18 | 41321EL | 0.6591 - 0.6910 | 2 1/4 | 0.5615 | 6 | 9 1/32 - 18 | 41322EL | 0.5661 - 0.5970 | 2 | 0.4355 | 6 | 8 1/32 - 16 | 41319EL | 0.5971 - 0.6280 | 2 1/4 | 0.5615 | 6 | 9 1/32 - 18 | 41320EL | 0.5341 - 0.5660 | 2 | 0.4355 | 6 | 8 1/32 - 16 | 41318EL | 0.4721 - 0.5030 | 2 | 0.4355 | 6 | 8 1/32 - 16 | 41316EL | 0.5031 - 0.5340 | 2 | 0.4355 | 6 | 8 1/32 - 16 | 41317EL | 0.4411 - 0.4720 | 1 3/4 | 0.3730 | 6 | 7 1/32 - 14 | 41315EL | 0.3781 - 0.4090 | 1 3/4 | 0.3105 | 4 | 7 1/32 - 14 | 41313EL | 0.4091 - 0.4410 | 1 3/4 | 0.3730 | 6 | 7 1/32 - 14 | 41314EL | 0.3151 - 0.3470 | 1 1/2 | 0.2792 | 4 | 6 1/32 - 12 | 41311EL | 0.3471 - 0.3780 | 1 3/4 | 0.3105 | 4 | 7 1/32 - 14 | 41312EL | 0.2531 - 0.2840 | 1 1/2 | 0.2505 | 4 | 6 1/32 - 12 | 41309EL | 0.2841 - 0.3150 | 1 1/2 | 0.2792 | 4 | 6 1/32 - 12 | 41310EL | 0.2211 - 0.2530 | 1 1/2 | 0.2193 | 4 | 6 1/32 - 12 | 41308EL |
Can't find the Reamers you need?
If you do not see the Reamers you are looking for click here to Request a Quote for the tool you need. For technical assistance with your Reamers please fill out our Hannibal Technical Support Questionnaire.