Type 320 FractionalTools - End Mills - High Spiral Shear Cutting End Mills - 15° Right Hand Spiral Flutes - 15° Right Hand Spiral Flutes For Cast Irons and High Temp Alloys
| Chip Class | Material Machined | Tool Type |
|---|---|---|
| 20 | NON-FERROUS - LONG CHIPS | - |
| 40 | NON-FERROUS - SHORT CHIPS | - |
| 60 | CAST IRONS | - |
Discontinued, While Supplies Last.
Description
- 15º spiral flutes for improved chip removal
- More flutes than Type 374 for use where less feed per tooth is required, but table speed is maintained for same productivity
- Spiral flutes distribute the impact load evenly, improving finish and increasing tool life.
- Radial edged for longer tool life
- Geometry and carbide grade, O.D. relief and end clearance appropriate for material being machined
- Flute long carbide tips brazed to tough hardened alloy steel body
- Spiral flute carbide tips formed to true helix angles
- Straight shanks have standard Weldon drive flats
- Non-center cutting end mills have the ends cleared to depth of carbide
Modifications
- Modified tool diameter
- Metric tool diameter
- Cutting diameter reduced for step or pilot
- Corner chamfer or corner radius
- Shortened shank or reduced shank diameter
- Additional shank drive flat(s)
- Coolant outlets
- Stocked coated tools priced below
Coatings available:
- TITANIUM NITRIDE - TiN
- TITANIUM CARBONITRIDE - TiCN
- ZIRCONIUM NITRIDE - ZrN
- AL TITANIUM NITRIDE - AITiN
| Decimal Diameter | Fractional Diameter | Carbide Length | Number Of Flutes | Overall Length | Shank Diameter | EDP | Price | 1.7500 | 1 3/4 | 2 | 8 | 4 1/2 | 1 1/4 | 32056 | $518.80 | 2.0000 | 2 | 2 | 8 | 4 1/2 | 1 1/4 | 32064 | $586.20 | 1.0000 | 1 | 1 1/2 | 6 | 4 | 1 | 32033 | $265.85 | 1.1250 | 1 1/8 | 1 3/4 | 6 | 4 1/4 | 1 | 32036 | $312.85 | 1.2500 | 1 1/4 | 1 3/4 | 6 | 4 1/4 | 1 | 32040 | $358.55 | 1.3750 | 1 3/8 | 1 3/4 | 6 | 4 1/4 | 1 | 32044 | $418.95 | 1.5000 | 1 1/2 | 2 | 6 | 4 1/2 | 1 1/4 | 32048 | $412.60 | 0.6250 | 5/8 | 1 1/4 | 4 | 3 3/8 | 5/8 | 32021 | $148.75 | 0.6875 | 11/16 | 1 1/4 | 4 | 3 3/8 | 5/8 | 32023 | $155.00 | 0.7500 | 3/4 | 1 1/4 | 4 | 3 3/8 | 5/8 | 32025 | $165.50 | 0.8125 | 13/16 | 1 1/2 | 4 | 3 5/8 | 5/8 | 32026 | $178.60 | 0.8750 | 7/8 | 1 1/2 | 4 | 3 3/4 | 7/8 | 32029 | $189.50 | 0.5000 | 1/2 | 1 | 4 | 3 | 1/2 | 32017 | $128.65 |
Can't find the End Mills you need?
If you do not see the End Mills you are looking for click here to Request a Quote for the tool you need. For technical assistance with your End Mills please fill out our Hannibal Technical Support Questionnaire.