Type 559Tools - Carbide Tipped Cutters - Milling Cutters and Slitting Saws with an Arbor Hole - Made to Size - General Purpose - 3" Diameter
Description
Radius or Chamfer on Both Sides
- 12 Teeth
- C-2(m) Carbide
- 5° Positive Radial Rake
- Width Tolerance: +.001"/-.00"
- OD tolerance: +.0313"/-.000"
- 1" Arbor hold +.001"/-.000"
- ANSI Standard keyway dimensions
- Add 5% to grind down hub width
- Add 5% to match OD's on cutter sets within .001"
- Not designed to be used on heat-treated materials greater than 363 Brinell (39Rc)
Radius Notes
- Maximum radius on one side is .2656"
- Full radius and maximum radius on both sides is 1/2 the width of the cutter
- A non-tangent radii must be quoted
Chamfer Notes
- Chamfer Angles can range from 0° to 45°
- Chamfer is measured off the OD
- Maximum chamfer is the LESSER of 1/3 the width of the cutter OR .2656" length of angle when measured across the OD
- Chamfer Angle Tolerance: +/- 1/2°
- Chamfers greater than 45°
Modifications
Coatings available:
- TITANIUM NITRIDE - TiN
- TITANIUM CARBONITRIDE - TiCN
- ZIRCONIUM NITRIDE - ZrN
- AL TITANIUM NITRIDE - AITiN
Decimal Diameter | Fractional Diameter | Hub Width | Modified Face Width Range | Number Of Teeth | EDP | 3.0000 | 3 | 0.0555 | 0.0600 - 0.0703 | 12 | 55998R2 | 3.0000 | 3 | 0.5 | 0.4688 - 0.5312 | 12 | 55915R2 | 3.0000 | 3 | 0.4375 | 0.4063 - 0.4687 | 12 | 55914R2 | 3.0000 | 3 | 0.3125 | 0.2813 - 0.3437 | 12 | 55912R2 | 3.0000 | 3 | 0.375 | 0.3438 - 0.4062 | 12 | 55913R2 | 3.0000 | 3 | 0.2188 | 0.2032 - 0.2343 | 12 | 55910R2 | 3.0000 | 3 | 0.25 | 0.2344 - 0.2812 | 12 | 55911R2 | 3.0000 | 3 | 0.1875 | 0.1719 - 0.2031 | 12 | 55909R2 | 3.0000 | 3 | 0.118 | 0.1172 - 0.1406 | 12 | 55906R2 | 3.0000 | 3 | 0.1562 | 0.1407 - 0.1718 | 12 | 55908R2 | 3.0000 | 3 | 0.0868 | 0.0860 - 0.1015 | 12 | 55902R2 | 3.0000 | 3 | 0.1024 | 0.1016 - 0.1171 | 12 | 55904R2 | 3.0000 | 3 | 0.0711 | 0.0704 - 0.0859 | 12 | 55900R2 |
Can't find the Carbide Tipped Cutters you need?
If you do not see the Carbide Tipped Cutters you are looking for click here to Request a Quote for the tool you need. For technical assistance with your Carbide Tipped Cutters please fill out our Hannibal Technical Support Questionnaire.