Fractional | Metric

DISCONTINUED - WHILE SUPPLIES LAST


TOOL SELECTOR
CHIP
CLASS		MATERIAL MACHINEDTOOL TYPE
 20  NON-FERROUS - LONG CHIPS  630 
 40  NON-FERROUS - SHORT CHIPS  630 / 631 
 60  CAST IRONS  631 / 630 
 80  LOW STRENGTH STEELS  CALL US 
 100  MEDIUM STRENGTH STEELS  CALL US 
 120  HIGH STRENGTH STEELS  CALL US 
 140  HIGH TEMPERATURE ALLOYS  CALL US

Type 631 Metric - 135º Split Point
Carbide Tipped
  • 135º split point designed for drilling tough abrasive or high tensile materials
  • Longer flute and overall lengths than jobbers length drills
  • Carbide tip high temperature brazed to hardened tool steel body
  • Smooth flutes for effective chip flow
  • Precision ground to insure concentricity of tip & body
  • All dimensional & element tolerances conform to one of:
    ASME/ANSI B94.11M
    ISO - International Organization for Standardization
    NAS 907 - National Aerospace Standards
    USCTI - United States Cutting Tool Institute (formerly MCTI)
 		  Modifications: (Prompt delivery)
  • Modified tool diameter
  • Modified metric tool diameter
  • Modified point and / or angle
  • Reduced shank diameter
  • Coatings available:
    •  TITANIUM NITRIDE - TiN 
     TITANIUM CARBONITRIDE - TiCN 
     ZIRCONIUM NITRIDE - ZrN 
     AL TITANIUM NITRIDE - AITiN 
Use:
  • The longer length of these drills increases their effective reach through drill bushings
  • For use in ASA split sleeve drill drivers
Below is a list of standard Taper Length Drills offered by Hannibal Carbide Tool. If you do not see the Taper Length Drills you are looking for you can click here for our SPECIAL TOOL QUOTE REQUEST FORM and fax (573-221-1140) or email your request to Hannibal. Within 24 hours we will let you know how we can supply your Taper Length Drills. For technical assistance with your Drills please click here to fill out and submit our HANNIBAL TECHNICAL SUPPORT QUESTIONNAIRE.
Tool Diameter Length Type 631
EDP NO.		 Metric
Price
Flute Overall
mm Inch mm Inch mm Inch
3.2  .1260 76.0 3         137.0 5  3/8  631032 $29.75
3.3  .1299 76.0 3         137.0 5  3/8  631033 29.75
3.4  .1339 76.0 3         137.0 5  3/8  631034 29.75
3.5  .1378 76.0 3         137.0 5  3/8  631035 29.10
3.6  .1417 76.0 3         137.0 5  3/8  631036 29.10
3.7  .1457 76.0 3         137.0 5  3/8  631037 29.10
3.8  .1496 76.0 3         137.0 5  3/8  631038 29.10
3.9  .1535 76.0 3         137.0 5  3/8  631039 29.10
4.0  .1575 86.0 3  3/8  146.0 5  3/4  631040 28.30
4.1  .1614 86.0 3  3/8  146.0 5  3/4  631041 29.75
4.2  .1654 86.0 3  3/8  146.0 5  3/4  631042 29.75
4.3  .1693 86.0 3  3/8  146.0 5  3/4  631043 29.75
4.4  .1732 86.0 3  3/8  146.0 5  3/4  631044 31.30
4.5  .1772 86.0 3  3/8  146.0 5  3/4  631045 31.30
4.6  .1811 86.0 3  3/8  146.0 5  3/4  631046 31.30
4.7  .1850 86.0 3  3/8  146.0 5  3/4  63313 33.50
4.8  .1890 92.0 3  5/8  152.0 6         63312 35.30
4.9  .1929 92.0 3  5/8  152.0 6         631049 31.30
5.0  .1969 92.0 3  5/8  152.0 6         631050 31.30
5.1  .2008 92.0 3  5/8  152.0 6         631051 32.60
5.2  .2047 92.0 3  5/8  152.0 6         631052 32.60
5.3  .2087 92.0 3  5/8  152.0 6         631053 32.60
5.4  .2126 92.0 3  5/8  152.0 6         631054 32.60
5.5  .2165 92.0 3  5/8  152.0 6         631055 32.60
5.6  .2205 95.0 3  3/4  156.0 6  1/8  631056 32.60
5.7  .2244 95.0 3  3/4  156.0 6  1/8  631057 32.60
5.8  .2283 95.0 3  3/4  156.0 6  1/8  631058 32.60
5.9  .2323 95.0 3  3/4  156.0 6  1/8  631059 34.05
6.0  .2362 95.0 3  3/4  156.0 6  1/8  631060 35.35
6.1  .2402 95.0 3  3/4  156.0 6  1/8  631061 36.05
6.2  .2441 95.0 3  3/4  156.0 6  1/8  631062 36.05
6.3  .2480 95.0 3  3/4  156.0 6  1/8  631063 36.05
6.4  .2520 98.0 3  7/8  159.0 6  1/4  631064 39.75
6.5  .2559 98.0 3  7/8  159.0 6  1/4  631065 39.75
6.6  .2598 98.0 3  7/8  159.0 6  1/4  631066 40.80
6.7  .2638 98.0 3  7/8  159.0 6  1/4  631067 40.80
6.8  .2677 98.0 3  7/8  159.0 6  1/4  631068 40.80
6.9  .2717 98.0 3  7/8  159.0 6  1/4  631069 40.80
7.0  .2756 98.0 3  7/8  159.0 6  1/4  631070 39.75
7.1  .2795 98.0 3  7/8  159.0 6  1/4  631071 40.80
7.2  .2835 102.0 4         162.0 6  3/8  631072 40.80
7.3  .2874 102.0 4         162.0 6  3/8  631073 40.80
7.4  .2913 102.0 4         162.0 6  3/8  631074 40.80
7.5  .2953 102.0 4         162.0 6  3/8  631075 43.00
7.6  .2992 102.0 4         162.0 6  3/8  631076 43.00
7.7  .3031 102.0 4         162.0 6  3/8  631077 43.00
7.8  .3071 102.0 4         162.0 6  3/8  631078 43.00
7.9  .3110 102.0 4         162.0 6  3/8  631079 43.00
8.0  .3150 105.0 4  1/8  165.0 6  1/2  631080 43.00
8.1  .3189 105.0 4  1/8  165.0 6  1/2  631081 43.00
8.2  .3228 105.0 4  1/8  165.0 6  1/2  631082 45.65
8.3  .3268 105.0 4  1/8  165.0 6  1/2  631083 45.65
8.4  .3307 105.0 4  1/8  165.0 6  1/2  631084 45.65
8.5  .3346 105.0 4  1/8  165.0 6  1/2  631085 48.65
8.6  .3386 105.0 4  1/8  165.0 6  1/2  631086 48.65
8.7  .3425 105.0 4  1/8  165.0 6  1/2  631087 48.65
8.8  .3465 108.0 4  1/4  171.0 6  3/4  631088 48.65
8.9  .3504 108.0 4  1/4  171.0 6  3/4  631089 48.65
9.0  .3543 108.0 4  1/4  171.0 6  3/4  631090 53.40
9.1  .3583 108.0 4  1/4  171.0 6  3/4  631091 53.40
9.2  .3622 108.0 4  1/4  171.0 6  3/4  631092 53.40
9.3  .3661 108.0 4  1/4  171.0 6  3/4  631093 53.40
9.4  .3701 108.0 4  1/4  171.0 6  3/4  631094 53.40
9.5  .3740 108.0 4  1/4  171.0 6  3/4  631095 53.40
9.6  .3780 111.0 4  3/8  178.0 7         631096 56.00
9.7  .3819 111.0 4  3/8  178.0 7         631097 56.00
9.8  .3858 111.0 4  3/8  178.0 7         631098 56.00
9.9  .3898 111.0 4  3/8  178.0 7         631099 56.00
10.0  .3937 111.0 4  3/8  178.0 7         631100 57.35
10.1  .3976 111.0 4  3/8  178.0 7         631101 57.35
10.2  .4016 111.0 4  3/8  178.0 7         631102 59.70
10.3  .4055 111.0 4  3/8  178.0 7         631103 59.70
10.4  .4094 117.0 4  5/8  184.0 7  1/4  631104 62.25
10.5  .4134 117.0 4  5/8  184.0 7  1/4  631105 62.25
10.6  .4173 117.0 4  5/8  184.0 7  1/4  631106 65.45
10.7  .4213 117.0 4  5/8  184.0 7  1/4  631107 65.45
10.8  .4252 117.0 4  5/8  184.0 7  1/4  631108 65.45
10.9  .4291 117.0 4  5/8  184.0 7  1/4  631109 65.45
11.0  .4331 117.0 4  5/8  184.0 7  1/4  631110 65.70
11.5  .4528 121.0 4  3/4  190.0 7  1/2  631115 72.70
12.0  .4724 121.0 4  3/4  197.0 7  3/4  631120 76.45
12.5  .4921 121.0 4  3/4  197.0 7  3/4  631125 76.45
13.0  .5118 121.0 4  3/4  203.0 8         631130 107.50
13.5  .5315 121.0 4  3/4  203.0 8         631135 108.45
14.0  .5512 124.0 4  7/8  210.0 8  1/4  631140 108.45
14.5  .5709 124.0 4  7/8  222.0 8  3/4  631145 119.90
15.0  .5906 124.0 4  7/8  222.0 8  3/4  631150 119.90
15.5  .6102 124.0 4  7/8  222.0 8  3/4  631155 137.60
16.0  .6299 130.0 5  1/8  229.0 9         631160 152.30
16.5  .6496 130.0 5  1/8  229.0 9         631165 152.30
17.0  .6693 137.0 5  3/8  235.0 9  1/4  631170 174.65
17.5  .6890 143.0 5  5/8  241.0 9  1/2  631175 153.05
18.0  .7087 143.0 5  5/8  241.0 9  1/2  631180 154.55
18.5  .7283 149.0 5  7/8  248.0 9  3/4  631185 155.40
19.0  .7480 149.0 5  7/8  248.0 9  3/4  631190 157.80
19.5  .7677 152.0 6         251.0 9  7/8  631195 164.40
20.0  .7874 156.0 6  1/8  254.0 10         631200 167.70
20.5  .8071 156.0 6  1/8  254.0 10         631205 171.00
21.0  .8268 156.0 6  1/8  254.0 10         631210 174.30
21.5  .8465 156.0 6  1/8  254.0 10         631215 180.90
22.0  .8661 156.0 6  1/8  254.0 10         631220 184.25
22.5  .8858 156.0 6  1/8  254.0 10         631225 187.55
23.0  .9055 156.0 6  1/8  254.0 10         631230 190.85
23.5  .9252 156.0 6  1/8  273.0 10  3/4  631235 197.40
24.0  .9449 162.0 6  3/8  279.0 11         631240 200.75
24.5  .9646 162.0 6  3/8  279.0 11         631245 204.05
25.0  .9843 162.0 6  3/8  279.0 11         631250 207.35
The specifications of the Taper Length Drills listed above are only the dimensions that are critical to the application. Please choose the Drills that meet your specific needs.

Everyone at Hannibal would like to THANK YOU for the privilege of servicing your Taper Length Drills needs.