Reduced Shank Fractional

DISCONTINUED - WHILE SUPPLIES LAST


TOOL SELECTOR
CHIP
CLASS
MATERIAL MACHINEDTOOL TYPE
 60  CAST IRONS  673 / 672 
 80  LOW STRENGTH STEELS  672 / 673 
 100  MEDIUM STRENGTH STEELS (UP TO 50 Rc)  672 / 673 
 100  MEDIUM STRENGTH STEELS (OVER 50 Rc)  670 / 671 
 120  HIGH STRENGTH STEELS (UP TO 50 Rc)  673 / 672 
 120  HIGH STRENGTH STEELS (OVER 50 Rc)  671 / 670 
 140  HIGH TEMPERATURE ALLOYS  673 / 672

Type 672 Reduced Shank Fractional - 118ยบ Point With Positive Edge
Carbide Tipped
  • Die drill - positive angle cutting edge
  • Thinned web which permits higher feed rates with less spindle power
  • Drill body diameter smaller than tool diameter to prevent gauling
  • Carbide tip high temperature brazed to hardened tool steel body
  • Smooth flutes for effective chip flow
  • Precision ground to insure concentricity of tip & body
  • All dimensional & element tolerances conform to one of:
    ASME/ANSI B94.11M
    ISO - International Organization for Standardization
    NAS 907 - National Aerospace Standards
    USCTI - United States Cutting Tool Institute (formerly MCTI)
  Modifications: (Prompt delivery)
  • Modified tool diameter
  • Metric tool diameter
  • Modified point and / or angle
  • Flat(s) on shank
  • Coatings available:
  •  TITANIUM NITRIDE - TiN 
     TITANIUM CARBONITRIDE - TiCN 
     ZIRCONIUM NITRIDE - ZrN 
     AL TITANIUM NITRIDE - AITiN 
Use:
  • Can be used in drill chucks with diameter limitations
  • For drilling hardened steel in the range of 35 to 65 Rockwell C
  • Will cut without annealing the workpiece
  • Light feed with steady pressure - clear chips frequently
  • Flood the cutting point with coolant
Below is a list of standard Reduced Shank Diameter Drills offered by Hannibal Carbide Tool. If you do not see the Reduced Shank Diameter Drills you are looking for you can click here for our SPECIAL TOOL QUOTE REQUEST FORM and fax (573-221-1140) or email your request to Hannibal. Within 24 hours we will let you know how we can supply your Reduced Shank Diameter Drills. For technical assistance with your Drills please click here to fill out and submit our HANNIBAL TECHNICAL SUPPORT QUESTIONNAIRE.
Tool Diameter Dimensions Type 672
EDP NO.
Reduced Shank Fractional
Price
Frac. Dec. Shank Diameter Overall Length
   5/16  .3125    1/  1/ 672620 $47.40
  11/32  .3438    1/  3/ 672622 50.50
   3/  .3750    1/         672624 54.25
  13/32  .4063    1/  1/ 672626 63.60
   7/16  .4375    1/  1/ 672628 73.70
  15/32  .4688    1/  3/ 672630 80.95
   1/  .5000    1/         672632 95.00
   7/16  .4375    3/  1/ 672728 73.70
  15/32  .4688    3/  3/ 672730 80.95
   1/  .5000    3/         672732 95.00
  17/32  .5313    3/         672734 108.95
   9/16  .5625    3/         672736 112.70
  19/32  .5938    3/         672738 119.25
   5/  .6250    3/         672740 122.90
  21/32  .6563    3/  1/ 672742 131.50
  11/16  .6875    3/  1/ 672744 135.05
  23/32  .7188    3/         672746 141.50
   3/  .7500    3/         672748 145.30
   9/16  .5625    1/         672836 112.70
  19/32  .5938    1/         672838 119.25
   5/  .6250    1/         672840 122.90
  21/32  .6563    1/  1/ 672842 131.50
  11/16  .6875    1/  1/ 672844 135.05
  23/32  .7188    1/         672846 141.50
   3/  .7500    1/         672848 145.30
  13/16  .8125    1/         672852 260.55
   7/  .8750    1/         672856 266.00
  15/16  .9375    1/         672860 296.40
        1.0000    1/         672864 314.45
  13/16  .8125    3/         672952 260.55
   7/  .8750    3/         672956 266.00
  15/16  .9375    3/         672960 296.40
        1.0000    3/         672964 314.45