Fractional

DISCONTINUED - WHILE SUPPLIES LAST


TOOL SELECTOR
CHIP
CLASS		MATERIAL MACHINEDTOOL TYPE
 20  NON-FERROUS - LONG CHIPS  - 
 40  NON-FERROUS - SHORT CHIPS  - 
 60  CAST IRONS  675 
 80  LOW STRENGTH STEELS  674 
 100  MEDIUM STRENGTH STEELS  674 or 675 
 120  HIGH STRENGTH STEELS  675 or 893 
 140  HIGH TEMPERATURE ALLOYS  675 or 893

Type 675 Fractional - 140º Point Spade Type
Carbide Tipped
  • Cam relieved 140º point designed for drilling tough abrasive or high tensile materials
  • Carbide tip brazed to tool steel body
  • Precision ground to insure concentricity of tip and shank body
  • Drill body diameter smaller than tool diameter to prevent gauling
  • Carbide tip high temperature brazed to hardened tool steel body
  • Smooth flutes for effective chip flow
  • Precision ground to insure concentricity of tip & body
  • All dimensional & element tolerances conform to one of:
    ASME/ANSI B94.11M
    ISO - International Organization for Standardization
    NAS 907 - National Aerospace Standards
    USCTI - United States Cutting Tool Institute (formerly MCTI)
 		  Modifications: (Prompt delivery)
  • Modified tool diameter
  • Metric tool diameter
  • Modified point and / or angle
  • Shortened shank or reduced shank diameter
  • Flat(s) on shank
  • Coatings available:
    •  TITANIUM NITRIDE - TiN 
     TITANIUM CARBONITRIDE - TiCN 
     ZIRCONIUM NITRIDE - ZrN 
     AL TITANIUM NITRIDE - AITiN 
Use:
  • For shallow holes, approximately 2 tool diameters deep
  • Short heavy construction allows more rigidity for tough applications where longer length drills are not needed

Notes
  EDP No. 67506 - 67513: Solid carbide
Below is a list of standard Hard Steel Die Drills offered by Hannibal Carbide Tool. If you do not see the Hard Steel Die Drills you are looking for you can click here for our SPECIAL TOOL QUOTE REQUEST FORM and fax (573-221-1140) or email your request to Hannibal. Within 24 hours we will let you know how we can supply your Hard Steel Die Drills. For technical assistance with your Drills please click here to fill out and submit our HANNIBAL TECHNICAL SUPPORT QUESTIONNAIRE.
Tool Diameter Overall Length Type 675
EDP NO.		 Fractional
Price
Frac. Dec.
   3/32  .0938 2         67506 $22.45
   7/64  .1094 2         67507 22.95
   1/8   .1250 2         67508 22.95
   9/64  .1406 2         67509 24.85
   5/32  .1563 2         67510 28.55
  11/64  .1719 3         67511 30.50
   3/16  .1875 3         67512 36.05
  13/64  .2031 3         67513 40.60
The specifications of the Hard Steel Die Drills listed above are only the dimensions that are critical to the application. Please choose the Drills that meet your specific needs.

Everyone at Hannibal would like to THANK YOU for the privilege of servicing your Hard Steel Die Drills needs.