Fractional


TOOL SELECTOR
CHIP
CLASS
MATERIAL MACHINEDTOOL TYPE
 20  NON-FERROUS - LONG CHIPS  730 or 732 
 40  NON-FERROUS - SHORT CHIPS  730 or 732 
 60  CAST IRONS  730 or 732 
 80  LOW STRENGTH STEELS  731 or 733 
 100  MEDIUM STRENGTH STEELS  731 or 733 
 120  HIGH STRENGTH STEELS  731 or 733 
 140  HIGH TEMPERATURE ALLOYS  730 or 732

Type 730 Fractional - 45ยบ Chamfer Milling Cutter - For Non-Ferrous & Cast Irons
Carbide Tipped
  • Right hand cut
  • Straight shank with Weldon flats
  • Tool diameter tolerance: plus .015", minus .000"
  • Tool geometry & carbide grade appropriate for material being machined
  Modifications: (Prompt delivery)
  • Reduced neck diameter
  • Shortened shank or reduced shank diameter
  • Additional shank drive flat(s)
  • Coatings available:
  •  TITANIUM NITRIDE - TiN 
     TITANIUM CARBONITRIDE - TiCN 
     ZIRCONIUM NITRIDE - ZrN 
     AL TITANIUM NITRIDE - AITiN 
Below is a list of standard Shank Type Cutters offered by Hannibal Carbide Tool. If you do not see the Shank Type Cutters you are looking for you can click here for our SPECIAL TOOL QUOTE REQUEST FORM and fax (573-221-1140) or email your request to Hannibal. Within 24 hours we will let you know how we can supply your Shank Type Cutters. For technical assistance with your Cutters please click here to fill out and submit our HANNIBAL TECHNICAL SUPPORT QUESTIONNAIRE.
Tool Diameter Dimensions Type 730
EDP NO.
Fractional
Price
Tool Width Shank Diameter Overall Length No. of Teeth
   1/    1/    3/  1/ 4 73016 $189.85
   3/    3/16    3/  1/ 6 73024 204.65
           5/16    1/  1/ 6 73032 240.15
 1/    1/    3/  3/ 8 73048 304.30