Hannibal Carbide Tool Inc.

Search

• PRODUCTS
• Spotlight
• Company Profile
• Advantages
• Request Info
• Tech Support
• Contact Us

• Reamers
  • Coolant Fed
  • Extended Length
  • General Purpose
  • Material Specific
  • Pipe Tap
  • Semi-Finished
  • Shell Reamers & Arbors
  • Step
  • Solid Carbide
• Drills
  • Aircraft Extension
  • Coolant Fed
  • Core
  • Glass & Tile
  • Hard Steel Die
  • Jobbers Length
  • Masonry
  • Reduced Shank Diameter
  • Spotting/Centering (CNC)
  • Stub Length (CNC)
  • Taper Length
  • Taper Shank
• Counterbores
  • Aircraft
  • Capscrew
  • Pilots
  • Straight Shank
  • Taper Shank
  • Stub Length
• Milling Cutters
  • Arbor Hole Type
  • Shank Type
• End Mills
  • Center Cutting
  • Coolant Fed
  • High Spiral Shear Cutting
  • Slow Spiral
  • Straight Flutes
• Port Contour
  Cutters
  • A.N.D. 10050 Integral Reamer Pilot
  • ISO 6149-1 Metric Port w/o I.D. Groove
  • Metric Port Reamer Pilot Series
  • MS33649 Integral Reamer Pilot
  • S.A.E. - MS16142 - J514F - J1926
• Centers
  • Brown & Sharpe
  • Jarno
  • Morse
• Countersinks
  • Single Flute
  • Three Flute
• Single Points
  • Premium C2
  • Premium C5 - C6
  • S.A. Series Swiss Automatic Tool

Extended Length | Fractional | Metric | Step Reamers

TOOL SELECTOR CHIP CLASS MATERIAL MACHINED TOOL TYPE  20   NON-FERROUS - LONG CHIPS   457   40   NON-FERROUS - SHORT CHIPS   457 / 458   60   CAST IRONS   458   80   LOW STRENGTH STEELS   459 / 458   100   MEDIUM STRENGTH STEELS   459   120   HIGH STRENGTH STEELS   459   140   HIGH TEMPERATURE ALLOYS   459
National Aerospace Standards - NAS 897 Type 459 Metric - For Steels & High Temp Alloys Carbide Tipped Type "C" with flute long carbide Straight polished flutes and straight shank Longer flutes than Type 450 on .5971" tool diameter and larger for straight deep holes Geometry and carbide grade appropriate for material being machined Carbide tips brazed to tough hardened alloy steel body Polished flutes for easy chip flow Precision ground cutting edges Material specific reamer shanks are ground to next smallest shank diameter listed in NAS 897 if tool diameter is within .005" of shank diameter		Modifications: (Prompt delivery) Modified tool diameter - priced below Closer tool diameter tolerance Cutting diameter reduced for step or pilot End chamfer other than 45º End cutting or corner radius Increased / decreased circular margin Increased / decreased tool diameter back taper Shortened shank or reduced shank diameter Flat(s) or tang on shank Coatings available:  TITANIUM NITRIDE - TiN   TITANIUM CARBONITRIDE - TiCN   ZIRCONIUM NITRIDE - ZrN   AL TITANIUM NITRIDE - AITiN

Notes
  Tool diameter in millimeters (mm); all other dimensions in inches

Below is a list of standard Material Specific Chucking Reamers offered by Hannibal Carbide Tool. If you do not see the Material Specific Chucking Reamers you are looking for you can click here for our SPECIAL TOOL QUOTE REQUEST FORM and fax (573-221-1140) or email your request to Hannibal. Within 24 hours we will let you know how we can supply your Material Specific Chucking Reamers. For technical assistance with your Reamers please click here to fill out and submit our HANNIBAL TECHNICAL SUPPORT QUESTIONNAIRE.

Tool Diameter		Type 459 EDP NO.	Metric Price	Dimensions				Finished To Modified Tool Diameter
				Max. Shank Diam.	No. of Flutes	Length		Modified Diameter Range (mm)		Price Each - Based on Quantity Ordered
mm	Inch					Flute & Carbide	Overall	Low	High	1	2	3	4	5-7	8-14	Over 14
4.5	.1772	459045	$53.05	.1704	4	1  1/8	4  1/2	4.4940	4.6960	$74.90	$60.40	$55.55	$53.20	$50.75	$48.75	$45.95
5.0	.1969	459050	53.05	.1805	4	1  1/8	4  1/2	4.6970	5.1820	74.90	60.40	55.55	53.20	50.75	48.75	45.95
5.5	.2165	459055	53.05	.2075	4	1  1/4	5	5.1830	5.6130	74.90	60.40	55.55	53.20	50.75	48.75	45.95
6.0	.2362	459060	53.05	.2265	4	1  1/2	6	5.6140	6.0450	74.90	60.40	55.55	53.20	50.75	48.75	45.95
–	–	459063	–	.2405	4	1  1/2	6	6.0460	6.4260	74.90	60.40	55.55	53.20	50.75	48.75	45.95
6.5	.2559	459065	54.00	.2485	4	1  1/2	6	6.4270	7.2140	75.85	61.35	56.50	54.10	51.75	49.65	46.90
7.0	.2756	459070	54.00	.2485	4	1  1/2	6	—	—	—	—	—	—	—	—	—
7.5	.2953	459075	54.00	.2792	4	1  1/2	6	7.2150	8.0010	75.85	61.35	56.50	54.10	51.75	49.65	46.90
8.0	.3150	459080	54.00	.2792	4	1  1/2	6	—	—	—	—	—	—	—	—	—
8.5	.3346	459085	55.60	.2792	4	1  1/2	6	8.0020	8.8140	77.50	62.95	58.10	55.75	53.30	51.30	48.50
9.0	.3543	459090	55.60	.3105	4	1  3/4	7	8.8150	9.6010	77.50	62.95	58.10	55.75	53.30	51.30	48.50
9.5	.3740	459095	55.60	.3105	4	1  3/4	7	—	—	—	—	—	—	—	—	—
10.0	.3937	459100	57.90	.3105	4	1  3/4	7	9.6020	10.3890	79.70	65.25	60.35	58.00	55.55	53.55	50.75
10.5	.4134	459105	61.85	.3730	6	1  3/4	7	10.3900	11.2010	83.70	69.20	64.35	61.95	59.50	57.50	54.75
11.0	.4331	459110	61.85	.3730	6	1  3/4	7	—	—	—	—	—	—	—	—	—
11.5	.4528	459115	66.10	.3730	6	1  3/4	7	11.2020	11.9890	87.95	73.40	68.60	66.20	63.75	61.75	58.95
12.0	.4724	459120	70.80	.4355	6	2	8	11.9900	12.7760	94.20	78.65	73.45	70.90	68.30	66.15	63.20
12.5	.4921	459125	70.80	.4355	6	2	8	—	—	—	—	—	—	—	—	—
13.0	.5118	459130	72.50	.4355	6	2	8	12.7770	13.5640	95.95	80.40	75.15	72.60	70.00	67.85	64.85
13.5	.5315	459135	72.50	.4355	6	2	8	—	—	—	—	—	—	—	—	—
14.0	.5512	459140	72.50	.4355	6	2	8	13.5650	14.3760	95.95	80.40	75.15	72.60	70.00	67.85	64.85
14.5	.5709	459145	74.85	.4355	6	2	8	14.3770	15.1640	98.25	82.75	77.55	75.00	72.40	70.25	67.20
15.0	.5906	459150	74.85	.4355	6	2	8	—	—	—	—	—	—	—	—	—
15.5	.6102	459155	74.85	.5615	6	2  1/4	9	15.1650	15.9510	98.25	82.75	77.55	75.00	72.40	70.25	67.20
16.0	.6299	459160	76.05	.5615	6	2  1/4	9	15.9520	16.7390	99.50	83.95	78.75	76.20	73.55	71.45	68.40
16.5	.6496	459165	76.05	.5615	6	2  1/4	9	—	—	—	—	—	—	—	—	—
17.0	.6693	459170	76.05	.5615	6	2  1/4	9	16.7400	17.5510	99.50	83.95	78.75	76.20	73.55	71.45	68.40
17.5	.6890	459175	76.05	.5615	6	2  1/4	9	—	—	—	—	—	—	—	—	—
18.0	.7087	459180	79.10	.5615	6	2  1/4	9	17.5520	18.3390	102.45	86.90	81.75	79.20	76.60	74.40	71.45
18.5	.7283	459185	79.10	.6245	6	2  1/2	9  1/2	18.3400	19.1260	102.45	86.90	81.75	79.20	76.60	74.40	71.45
19.0	.7480	459190	79.10	.6245	6	2  1/2	9  1/2	—	—	—	—	—	—	—	—	—
19.5	.7677	459195	81.40	.6245	6	2  1/2	9  1/2	19.1270	19.9140	104.85	89.30	84.05	81.50	78.90	76.75	73.80
20.0	.7874	459200	81.40	.6245	6	2  1/2	9  1/2	19.9150	20.7260	104.85	89.30	84.05	81.50	78.90	76.75	73.80
20.5	.8071	459205	81.40	.6245	6	2  1/2	9  1/2	—	—	—	—	—	—	—	—	—
21.0	.8268	459210	84.25	.6245	6	2  1/2	9  1/2	20.7270	21.5140	107.70	92.15	86.90	84.40	81.80	79.60	76.65
21.5	.8465	459215	84.25	.6245	6	2  1/2	9  1/2	—	—	—	—	—	—	—	—	—
22.0	.8661	459220	84.25	.7495	6	2  5/8	10	21.5150	22.3010	107.70	92.15	86.90	84.40	81.80	79.60	76.65
22.5	.8858	459225	100.05	.7495	6	2  5/8	10	22.3020	23.0890	124.35	108.25	102.85	100.20	97.45	95.25	92.15
23.0	.9055	459230	100.05	.7495	6	2  5/8	10	—	—	—	—	—	—	—	—	—
23.5	.9252	459235	100.05	.7495	8	2  5/8	10	23.0900	23.9010	124.35	108.25	102.85	100.20	97.45	95.25	92.15
24.0	.9449	459240	104.35	.7495	8	2  5/8	10	23.9020	24.6890	128.65	112.55	107.15	104.50	101.75	99.55	96.40
24.5	.9646	459245	104.35	.7495	8	2  5/8	10	—	—	—	—	—	—	—	—	—
25.0	.9843	459250	104.35	.8745	8	2  3/4	10  1/2	24.6900	25.4760	128.65	112.55	107.15	104.50	101.75	99.55	96.40
25.5	1.0039	459255	107.10	.8745	8	2  3/4	10  1/2	25.4770	27.0760	130.35	114.95	109.75	107.20	104.60	102.45	99.50
26.0	1.0236	459260	107.10	.8745	8	2  3/4	10  1/2	—	—	—	—	—	—	—	—	—
27.0	1.0630	459270	107.10	.8745	8	2  3/4	10  1/2	—	—	—	—	—	—	—	—	—
28.0	1.1024	459280	115.10	.8745	8	2  7/8	11	27.0770	28.6510	138.40	123.00	117.75	115.25	112.65	110.50	107.55
29.0	1.1417	459290	119.90	.9995	8	2  7/8	11	28.6520	30.2390	143.20	127.75	122.60	120.05	117.50	115.30	112.30
30.0	1.1811	459300	119.90	.9995	8	2  7/8	11	—	—	—	—	—	—	—	—	—
31.0	1.2205	459310	128.75	.9995	8	3	11  1/2	30.2400	31.8260	152.10	136.60	131.45	128.90	126.35	124.15	121.15
32.0	1.2598	459320	132.05	.9995	8	3	11  1/2	31.8270	33.4140	155.30	139.90	134.75	132.20	129.60	127.45	124.45
33.0	1.2992	459330	132.05	.9995	8	3	11  1/2	—	—	—	—	—	—	—	—	—
34.0	1.3386	459340	140.15	.9995	8	3  1/4	12	33.4150	35.0010	163.45	148.00	142.85	140.30	137.70	135.50	132.55
35.0	1.3780	459350	140.15	.9995	8	3  1/4	12	—	—	—	—	—	—	—	—	—
36.0	1.4173	459360	150.90	.9995	8	3  1/4	12	35.0020	36.5890	174.20	158.75	153.55	151.05	148.45	146.30	143.35
37.0	1.4567	459370	155.05	1.2495	8	3  1/2	12  1/2	36.5900	38.1760	178.30	162.85	157.70	155.15	152.55	150.45	147.45
38.0	1.4961	459380	155.05	1.2495	8	3  1/2	12  1/2	—	—	—	—	—	—	—	—	—

The specifications of the Material Specific Chucking Reamers listed above are only the dimensions that are critical to the application. Please choose the Reamers that meet your specific needs.

Everyone at Hannibal would like to THANK YOU for the privilege of servicing your Material Specific Chucking Reamers needs.

Hannibal Carbide Tool, Inc.

Industrial Supply Association

Value Added Partner