Fractional | Metric | Semi-Finished | Stocked Decimal | Wire & Letter Sizes


TOOL SELECTOR
CHIP
CLASS		MATERIAL MACHINEDTOOL TYPE
 20  NON-FERROUS - LONG CHIPS  400 / 407 
 40  NON-FERROUS - SHORT CHIPS  400 / 407 
 60  CAST IRONS  400 / 408 
 80  LOW STRENGTH STEELS  400 / 409 
 100  MEDIUM STRENGTH STEELS  400 / 409 
 120  HIGH STRENGTH STEELS  400 / 409 
 140  HIGH TEMPERATURE ALLOYS  409

Type 400 Metric - Straight Flutes & Shank
Carbide Tipped
  • Straight polished flutes and straight shank
  • Carbide tips brazed to tough hardened alloy steel body
  • Polished flutes for easy chip flow
  • Precision ground cutting edges
 		  Modifications: (Prompt delivery)
  • Modified tool diameter - priced below
  • Closer tool diameter tolerance
  • Cutting diameter reduced for step or pilot
  • End chamfer other than 45º
  • End cutting or corner radius
  • Increased / decreased circular margin
  • Increased / decreased tool diameter back taper
  • Shortened shank or reduced shank diameter
  • Flat(s) or tang on shank
  • Coatings available:
     TITANIUM NITRIDE - TiN 
     TITANIUM CARBONITRIDE - TiCN 
     ZIRCONIUM NITRIDE - ZrN 
     AL TITANIUM NITRIDE - AITiN 
Use:
  • For all general reaming of steels, cast irons, non-ferrous materials, plastics, and non-metals

Notes
  Tool diameter in millimeters (mm); all other dimensions in inches.
  Modified tool diameters are available up to 50mm - contact us for price
Below is a list of standard General Purpose Chucking Reamers offered by Hannibal Carbide Tool. If you do not see the General Purpose Chucking Reamers you are looking for you can click here for our SPECIAL TOOL QUOTE REQUEST FORM and fax (573-221-1140) or email your request to Hannibal. Within 24 hours we will let you know how we can supply your General Purpose Chucking Reamers. For technical assistance with your Reamers please click here to fill out and submit our HANNIBAL TECHNICAL SUPPORT QUESTIONNAIRE.
Tool Diameter Type 400
EDP NO.		 Metric
Price		 Dimensions Finished To Modified Tool Diameter
Shank Diameter No. of Flutes Length Modified Diameter Range (mm) Price Each - Based on Quantity Ordered
mm Inch Flute Carbide Overall Low High 1 2 3 4 5-7 8-14 Over 14
4.0  .1575 400040 $42.60  .151 4 1            1/2  4         3.9620 4.4930 $64.40 $49.95 $45.05 $42.65 $40.25 $38.20 $35.45
4.5  .1772 400045 39.65   11/64 4 1  1/8     1/2  4  1/2  4.4940 5.1820 60.90 46.80 42.10 39.75 37.35 35.40 32.70
5.0  .1969 400050 39.65   11/64 4 1  1/8     1/2  4  1/2  — — — — — — — — —
5.5  .2165 400055 39.65   13/64 4 1  1/4     1/2  5         5.1830 5.6130 60.90 46.80 42.10 39.75 37.35 35.40 32.70
6.0  .2362 400060 41.50    7/32 4 1  1/2     1/2  6         5.6140 6.0450 62.70 48.60 43.85 41.55 39.15 37.20 34.50
— – 400063 –   15/64 4 1  1/2     1/2  6         6.0460 6.4260 60.90 46.80 42.10 39.75 37.35 35.40 32.70
6.5  .2559 400065 40.30   15/64 4 1  1/2     1/2  6         6.4270 7.2140 61.55 47.45 42.70 40.40 38.00 36.05 33.35
7.0  .2756 400070 40.30   15/64 4 1  1/2     1/2  6         — — — — — — — — —
7.5  .2953 400075 40.30    9/32 4 1  1/2     1/2  6         7.2150 8.0010 61.55 47.45 42.70 40.40 38.00 36.05 33.35
8.0  .3150 400080 40.30    9/32 4 1  1/2     1/2  6         — — — — — — — — —
8.5  .3346 400085 41.35    9/32 4 1  1/2     5/8  6         8.0020 8.8140 62.65 48.55 43.80 41.50 39.10 37.15 34.45
9.0  .3543 400090 37.95    5/16 4 1  3/4     5/8  7         8.8150 9.6010 57.45 44.50 40.15 38.05 35.90 34.10 31.60
9.5  .3740 400095 37.95    5/16 4 1  3/4     5/8  7         — — — — — — — — —
10.0  .3937 400100 42.95    5/16 4 1  3/4     5/8  7         9.6020 10.3890 64.20 50.10 45.35 43.05 40.65 38.70 36.00
10.5  .4134 400105 45.15    3/8  4 1  3/4     5/8  7         10.3900 11.2010 66.45 52.35 47.60 45.30 42.95 40.95 38.25
11.0  .4331 400110 45.15    3/8  4 1  3/4     5/8  7         — — — — — — — — —
11.5  .4528 400115 45.70    3/8  4 1  3/4     5/8  7         11.2020 11.9890 66.95 52.85 48.10 45.80 43.45 41.50 38.75
12.0  .4724 400120 53.55    7/16 6 2            5/8  8         11.9900 12.7760 76.95 61.45 56.25 53.70 51.10 48.90 45.90
12.5  .4921 400125 53.55    7/16 6 2            5/8  8         — — — — — — — — —
13.0  .5118 400130 57.45    7/16 6 2            5/8  8         12.7770 13.5640 80.75 65.25 60.05 57.50 54.90 52.75 49.70
13.5  .5315 400135 57.45    7/16 6 2            5/8  8         — — — — — — — — —
14.0  .5512 400140 57.45    7/16 6 2            5/8  8         13.5650 14.3760 80.75 65.25 60.05 57.50 54.90 52.75 49.70
14.5  .5709 400145 59.25    7/16 6 2            5/8  8         14.3770 15.1640 82.70 67.15 61.95 59.40 56.80 54.65 51.60
15.0  .5906 400150 59.25    7/16 6 2            5/8  8         — — — — — — — — —
15.5  .6102 400155 59.25    9/16 6 2  1/4     5/8  9         15.1650 15.9510 82.70 67.15 61.95 59.40 56.80 54.65 51.60
16.0  .6299 400160 60.10    9/16 6 2  1/4     5/8  9         15.9520 16.7390 83.55 68.00 62.75 60.20 57.60 55.45 52.45
16.5  .6496 400165 60.10    9/16 6 2  1/4     5/8  9         — — — — — — — — —
17.0  .6693 400170 60.10    9/16 6 2  1/4     5/8  9         16.7400 17.5510 83.55 68.00 62.75 60.20 57.60 55.45 52.45
17.5  .6890 400175 60.10    9/16 6 2  1/4     5/8  9         — — — — — — — — —
18.0  .7087 400180 62.45    9/16 6 2  1/4     5/8  9         17.5520 18.3390 85.85 70.35 65.15 62.60 60.00 57.80 54.80
18.5  .7283 400185 62.45    5/8  6 2  1/2     3/4  9  1/2  18.3400 19.1260 85.85 70.35 65.15 62.60 60.00 57.80 54.80
19.0  .7480 400190 62.45    5/8  6 2  1/2     3/4  9  1/2  — — — — — — — — —
19.5  .7677 400195 64.20    5/8  6 2  1/2     3/4  9  1/2  19.1270 19.9140 87.55 72.10 66.85 64.30 61.70 59.50 56.55
20.0  .7874 400200 64.20    5/8  6 2  1/2     3/4  9  1/2  19.9150 20.7260 87.55 72.10 66.85 64.30 61.70 59.50 56.55
20.5  .8071 400205 64.20    5/8  6 2  1/2     3/4  9  1/2  — — — — — — — — —
21.0  .8268 400210 66.35    5/8  6 2  1/2     3/4  9  1/2  20.7270 21.5140 89.75 74.20 69.00 66.45 63.85 61.70 58.70
21.5  .8465 400215 66.35    5/8  6 2  1/2     3/4  9  1/2  — — — — — — — — —
22.0  .8661 400220 66.35    3/4  6 2  5/8     3/4  10         21.5150 22.3010 89.75 74.20 69.00 66.45 63.85 61.70 58.70
22.5  .8858 400225 78.45    3/4  6 2  5/8     3/4  10         22.3020 23.0890 102.70 86.55 81.20 78.55 75.85 73.60 70.50
23.0  .9055 400230 78.45    3/4  6 2  5/8     3/4  10         — — — — — — — — —
23.5  .9252 400235 78.45    3/4  8 2  5/8     3/4  10         23.0900 23.9010 102.70 86.55 81.20 78.55 75.85 73.60 70.50
24.0  .9449 400240 81.75    3/4  8 2  5/8     3/4  10         23.9020 24.6890 106.00 89.85 84.50 81.85 79.15 76.90 73.80
24.5  .9646 400245 81.75    3/4  8 2  5/8     3/4  10         — — — — — — — — —
25.0  .9843 400250 81.75    7/8  8 2  3/4     3/4  10  1/2  24.6900 25.4760 106.00 89.85 84.50 81.85 79.15 76.90 73.80
25.5 1.0039 400255 83.65    7/8  8 2  3/4     3/4  10  1/2  25.4770 27.0760 107.00 91.50 86.35 83.80 81.25 79.10 76.05
26.0 1.0236 400260 83.65    7/8  8 2  3/4     3/4  10  1/2  — — — — — — — — —
27.0 1.0630 400270 83.65    7/8  8 2  3/4     3/4  10  1/2  — — — — — — — — —
28.0 1.1024 400280 89.65    7/8  8 2  7/8     7/8  11         27.0770 28.6510 112.90 97.45 92.30 89.75 87.20 85.05 82.05
29.0 1.1417 400290 93.65 1         8 2  7/8     7/8  11         28.6520 30.2390 116.95 101.55 96.30 93.80 91.20 89.05 86.10
30.0 1.1811 400300 93.65 1         8 2  7/8     7/8  11         — — — — — — — — —
31.0 1.2205 400310 98.50 1         8 3            7/8  11  1/2  30.2400 31.8260 121.75 106.30 101.15 98.60 96.05 93.90 90.90
32.0 1.2598 400320 103.00 1         8 3            7/8  11  1/2  31.8270 33.4140 126.35 110.90 105.70 103.20 100.55 98.40 95.45
33.0 1.2992 400330 103.00 1         8 3            7/8  11  1/2  — — — — — — — — —
34.0 1.3386 400340 108.75 1         8 3  1/4     7/8  12         33.4150 35.0010 132.00 116.55 111.40 108.85 106.25 104.10 101.15
35.0 1.3780 400350 108.75 1         8 3  1/4     7/8  12         — — — — — — — — —
36.0 1.4173 400360 120.00 1  1/4  8 3  1/4     7/8  12         35.0020 36.5890 143.30 127.80 122.65 120.10 117.55 115.40 112.40
37.0 1.4567 400370 126.25 1  1/4  8 3  1/2     7/8  12  1/2  36.5900 38.1760 149.55 134.10 128.90 126.40 123.80 121.60 118.65
The specifications of the General Purpose Chucking Reamers listed above are only the dimensions that are critical to the application. Please choose the Reamers that meet your specific needs.

Everyone at Hannibal would like to THANK YOU for the privilege of servicing your General Purpose Chucking Reamers needs.