Fractional | Metric


TOOL SELECTOR
CHIP
CLASS		MATERIAL MACHINEDTOOL TYPE
 20  NON-FERROUS - LONG CHIPS  452 / 453 
 40  NON-FERROUS - SHORT CHIPS  452 / 453 
 60  CAST IRONS  452 / 454 
 80  LOW STRENGTH STEELS  452 / 455 
 100  MEDIUM STRENGTH STEELS  452 / 455 
 120  HIGH STRENGTH STEELS  452 / 455 
 140  HIGH TEMPERATURE ALLOYS  455

Type 452 Metric - Straight Flute Long Carbide - Taper Shank
Carbide Tipped
  • Straight polished flutes with flute long carbide
  • Taper shank
  • Geometry and carbide grade appropriate for material being machined
  • Carbide tips brazed to tough hardened alloy steel body
  • Polished flutes for easy chip flow
  • Precision ground cutting edges
  • “Taper Shank No.” refers to American Standard taper series (formerly Morse taper series) per ASME/ANSI B5.10
 		  Modifications: (Prompt delivery)
  • Modified tool diameter - priced below
  • Closer tool diameter tolerance
  • Cutting diameter reduced for step or pilot
  • End chamfer other than 45º
  • End cutting or corner radius
  • Increased / decreased circular margin
  • Increased / decreased tool diameter back taper
  • Shank whistle notch for set screw
  • Smaller taper shank
  • Coatings available:
     TITANIUM NITRIDE - TiN 
     TITANIUM CARBONITRIDE - TiCN 
     ZIRCONIUM NITRIDE - ZrN 
     AL TITANIUM NITRIDE - AITiN 
Use:
  • For all general reaming - specifically designed with flute long carbide for deep hole reaming to precision tolerances and for long production runs
Below is a list of standard General Purpose Chucking Reamers offered by Hannibal Carbide Tool. If you do not see the General Purpose Chucking Reamers you are looking for you can click here for our SPECIAL TOOL QUOTE REQUEST FORM and fax (573-221-1140) or email your request to Hannibal. Within 24 hours we will let you know how we can supply your General Purpose Chucking Reamers. For technical assistance with your Reamers please click here to fill out and submit our HANNIBAL TECHNICAL SUPPORT QUESTIONNAIRE.
Tool Diameter Type 452
EDP NO.		 Metric
Price		 Dimensions Finished To Modified Tool Diameter
Taper Shank No. No. of Flutes Length Modified Diameter Range (mm) Price Each - Based on Quantity Ordered
mm Inch Flute & Carbide Overall Low High 1 2 3 4 5-7 8-14 Over 14
6.0  .2362 452060 $51.30 1 4 1  1/2  6         6.0000 6.4260 $73.15 $58.65 $53.80 $51.40 $48.95 $46.95 $44.15
6.5  .2559 452065 51.90 1 4 1  1/2  6         6.4270 7.2140 73.70 59.25 54.40 52.00 49.55 47.55 44.75
7.0  .2756 452070 51.90 1 4 1  1/2  6         — — — — — — — — —
7.5  .2953 452075 51.90 1 4 1  1/2  6         7.2150 8.0010 73.70 59.25 54.40 52.00 49.55 47.55 44.75
8.0  .3150 452080 51.90 1 4 1  1/2  6         — — — — — — — — —
8.5  .3346 452085 52.85 1 4 1  1/2  6         8.0020 8.8140 74.70 60.20 55.35 52.95 50.50 48.50 45.70
9.0  .3543 452090 53.30 1 4 1  3/4  7         8.8150 9.6010 75.15 60.70 55.80 53.40 51.00 48.95 46.15
9.5  .3740 452095 53.30 1 4 1  3/4  7         — — — — — — — — —
10.0  .3937 452100 55.60 1 4 1  3/4  7         9.6020 10.3890 77.50 62.95 58.10 55.75 53.30 51.30 48.50
10.5  .4134 452105 58.65 1 4 1  3/4  7         10.3900 11.2010 80.50 66.00 61.15 58.80 56.35 54.35 51.50
11.0  .4331 452110 58.65 1 4 1  3/4  7         — — — — — — — — —
11.5  .4528 452115 59.70 1 4 1  3/4  7         11.2020 11.9890 81.50 67.00 62.15 59.80 57.35 55.35 52.50
12.0  .4724 452120 64.25 1 6 2         8         11.9900 12.7760 87.65 72.15 66.90 64.35 61.75 59.55 56.60
12.5  .4921 452125 64.25 1 6 2         8         — — — — — — — — —
13.0  .5118 452130 69.40 1 6 2         8         12.7770 13.5640 92.80 77.25 72.10 69.55 66.90 64.75 61.75
13.5  .5315 452135 69.40 1 6 2         8         — — — — — — — — —
14.0  .5512 452140 69.40 1 6 2         8         13.5650 14.3760 92.80 77.25 72.10 69.55 66.90 64.75 61.75
14.5  .5709 452145 72.15 1 6 2         8         14.3770 15.1640 95.50 80.05 74.80 72.25 69.65 67.45 64.50
15.0  .5906 452150 72.15 1 6 2         8         — — — — — — — — —
15.5  .6102 452155 72.15 2 6 2         9         15.1650 15.9510 95.50 80.05 74.80 72.25 69.65 67.45 64.50
16.0  .6299 452160 73.25 2 6 2         9         15.9520 16.7390 96.65 81.15 75.95 73.40 70.80 68.65 65.60
16.5  .6496 452165 73.25 2 6 2         9         — — — — — — — — —
17.0  .6693 452170 73.25 2 6 2         9         16.7400 17.5510 96.65 81.15 75.95 73.40 70.80 68.65 65.60
17.5  .6890 452175 73.25 2 6 2         9         — — — — — — — — —
18.0  .7087 452180 74.15 2 6 2         9         17.5520 18.3390 97.55 82.05 76.85 74.30 71.65 69.55 66.50
18.5  .7283 452185 76.20 2 6 2         9  1/2  18.3400 19.1260 99.60 84.05 78.85 76.30 73.70 71.55 68.60
19.0  .7480 452190 76.20 2 6 2         9  1/2  — — — — — — — — —
19.5  .7677 452195 76.70 2 6 2         9  1/2  19.1270 19.9140 100.10 84.60 79.40 76.85 74.20 72.10 69.05
20.0  .7874 452200 78.25 2 6 2         9  1/2  19.9150 20.7260 101.65 86.15 80.90 78.35 75.75 73.55 70.60
20.5  .8071 452205 78.25 2 6 2         9  1/2  — — — — — — — — —
21.0  .8268 452210 81.20 2 6 2         9  1/2  20.7270 21.5140 104.60 89.10 83.90 81.35 78.75 76.60 73.55
21.5  .8465 452215 81.20 2 6 2         9  1/2  — — — — — — — — —
22.0  .8661 452220 81.20 2 6 2  1/4  10         21.5150 22.3010 104.60 89.10 83.90 81.35 78.75 76.60 73.55
22.5  .8858 452225 93.60 2 6 2  1/4  10         22.3020 23.0890 117.85 101.75 96.35 93.70 91.05 88.75 85.70
23.0  .9055 452230 93.60 2 6 2  1/4  10         — — — — — — — — —
23.5  .9252 452235 96.90 3 8 2  1/4  10         23.0900 23.9010 121.15 105.05 99.65 97.00 94.35 92.05 89.00
24.0  .9449 452240 100.45 3 8 2  1/4  10         23.9020 24.6890 124.75 108.65 103.25 100.60 97.90 95.65 92.50
24.5  .9646 452245 100.45 3 8 2  1/4  10         — — — — — — — — —
25.0  .9843 452250 100.45 3 8 2  1/4  10  1/2  24.6900 25.4760 124.75 108.65 103.25 100.60 97.90 95.65 92.50
25.5 1.0039 452255 133.25 3 8 2  1/4  10  1/2  25.4770 27.0760 156.55 141.15 135.90 133.40 130.80 128.65 125.70
26.0 1.0236 452260 133.25 3 8 2  1/4  10  1/2  — — — — — — — — —
27.0 1.0630 452270 133.25 3 8 2  1/4  10  1/2  — — — — — — — — —
28.0 1.1024 452280 142.80 3 8 2  1/4  11         27.0770 28.6510 166.05 150.60 145.40 142.90 140.30 138.15 135.20
29.0 1.1417 452290 152.65 3 8 2  1/4  11         28.6520 30.2390 175.90 160.50 155.25 152.75 150.15 148.00 145.05
30.0 1.1811 452300 152.65 3 8 2  1/4  11         — — — — — — — — —
31.0 1.2205 452310 161.55 4 8 2  1/2  11  1/2  30.2400 31.8260 184.80 169.40 164.20 161.65 159.05 156.90 153.95
32.0 1.2598 452320 181.05 4 8 2  1/2  11  1/2  31.8270 33.4140 204.40 188.95 183.75 181.25 178.65 176.45 173.45
33.0 1.2992 452330 181.05 4 8 2  1/2  11  1/2  — — — — — — — — —
34.0 1.3386 452340 205.45 4 8 2  1/2  12         33.4150 35.0010 228.70 213.30 208.10 205.60 202.95 200.80 197.85
35.0 1.3780 452350 205.45 4 8 2  1/2  12         — — — — — — — — —
36.0 1.4173 452360 213.95 4 8 2  1/2  12         35.0020 36.5890 237.25 221.80 216.65 214.10 211.55 209.35 206.35
37.0 1.4567 452370 222.55 4 8 2  1/2  12  1/2  36.5900 38.1760 245.80 230.35 225.15 222.65 220.05 217.90 214.95
38.0 1.4961 452380 222.55 4 8 2  1/2  12  1/2  — — — — — — — — —
The specifications of the General Purpose Chucking Reamers listed above are only the dimensions that are critical to the application. Please choose the Reamers that meet your specific needs.

Everyone at Hannibal would like to THANK YOU for the privilege of servicing your General Purpose Chucking Reamers needs.