Fractional | Metric | Semi-Finished | Stocked Decimal


TOOL SELECTOR
CHIP
CLASS		MATERIAL MACHINEDTOOL TYPE
 20  NON-FERROUS - LONG CHIPS  450 / 457 
 40  NON-FERROUS - SHORT CHIPS  450 / 457 
 60  CAST IRONS  450 / 458 
 80  LOW STRENGTH STEELS  450 / 459 
 100  MEDIUM STRENGTH STEELS  450 / 459 
 120  HIGH STRENGTH STEELS  450 / 459 
 140  HIGH TEMPERATURE ALLOYS  459

Type 450 Metric - Straight Flute Long Carbide - Straight Shank
Carbide Tipped
  • Straight polished flutes with flute long carbide
  • Straight shank
  • Carbide tips brazed to tough hardened alloy steel body
  • Polished flutes for easy chip flow
  • Precision ground cutting edges
 		  Modifications: (Prompt delivery)
  • Modified tool diameter - priced below
  • Closer tool diameter tolerance
  • Cutting diameter reduced for step or pilot
  • End chamfer other than 45º
  • End cutting or corner radius
  • Increased / decreased circular margin
  • Increased / decreased tool diameter back taper
  • Shortened shank or reduced shank diameter
  • Flat(s) or tang on shank
  • Coatings available:
     TITANIUM NITRIDE - TiN 
     TITANIUM CARBONITRIDE - TiCN 
     ZIRCONIUM NITRIDE - ZrN 
     AL TITANIUM NITRIDE - AITiN 
Use:
  • For all general reaming - specifically designed with flute long carbide for deep hole reaming to precision tolerances and for long production runs

Notes
  Modified tool diameters are available up to 50mm - contact us for price
Below is a list of standard General Purpose Chucking Reamers offered by Hannibal Carbide Tool. If you do not see the General Purpose Chucking Reamers you are looking for you can click here for our SPECIAL TOOL QUOTE REQUEST FORM and fax (573-221-1140) or email your request to Hannibal. Within 24 hours we will let you know how we can supply your General Purpose Chucking Reamers. For technical assistance with your Reamers please click here to fill out and submit our HANNIBAL TECHNICAL SUPPORT QUESTIONNAIRE.
Tool Diameter Type 450
EDP NO.		 Metric
Price		 Dimensions Finished To Modified Tool Diameter
Shank Diameter No. of Flutes Length Modified Diameter Range (mm) Price Each - Based on Quantity Ordered
mm Inch Flute & Carbide Overall Low High 1 2 3 4 5-7 8-14 Over 14
4.5  .1772 450045 $45.90   11/64 4 1  1/2  6         4.4940 5.1820 $67.70 $53.20 $48.35 $45.95 $43.50 $41.50 $38.70
5.0  .1969 450050 45.90   11/64 4 1  1/2  6         — — — — — — — — —
5.5  .2165 450055 45.90   13/64 4 1  1/2  6         5.1830 5.6130 67.70 53.20 48.35 45.95 43.50 41.50 38.70
6.0  .2362 450060 45.90    7/32 4 1  1/2  6         5.6140 6.0450 67.70 53.20 48.35 45.95 43.50 41.50 38.70
– – 450063 –   15/64 4 1  1/2  6         6.0460 6.4260 67.70 53.20 48.35 45.95 43.50 41.50 38.70
6.5  .2559 450065 46.60   15/64 4 1  1/2  6         6.4270 7.2140 68.40 53.95 49.10 46.70 44.30 42.25 39.50
7.0  .2756 450070 46.60   15/64 4 1  1/2  6         — — — — — — — — —
7.5  .2953 450075 46.60    9/32 4 1  1/2  6         7.2150 8.0010 68.40 53.95 49.10 46.70 44.30 42.25 39.50
8.0  .3150 450080 46.60    9/32 4 1  1/2  6         — — — — — — — — —
8.5  .3346 450085 47.95    9/32 4 1  1/2  6         8.0020 8.8140 69.80 55.35 50.45 48.05 45.65 43.60 40.85
9.0  .3543 450090 47.95    5/16 4 1  3/4  7         8.8150 9.6010 69.80 55.35 50.45 48.05 45.65 43.60 40.85
9.5  .3740 450095 47.95    5/16 4 1  3/4  7         — — — — — — — — —
10.0  .3937 450100 49.85    5/16 4 1  3/4  7         9.6020 10.3890 71.70 57.25 52.35 50.00 47.55 45.55 42.70
10.5  .4134 450105 53.10    3/8  4 1  3/4  7         10.3900 11.2010 75.00 60.45 55.60 53.25 50.85 48.80 46.00
11.0  .4331 450110 53.10    3/8  4 1  3/4  7         — — — — — — — — —
11.5  .4528 450115 56.60    3/8  4 1  3/4  7         11.2020 11.9890 78.50 63.95 59.15 56.75 54.35 52.30 49.50
12.0  .4724 450120 60.70    7/16 6 2         8         11.9900 12.7760 84.05 68.60 63.35 60.80 58.20 56.00 53.05
12.5  .4921 450125 60.70    7/16 6 2         8         — — — — — — — — —
13.0  .5118 450130 62.10    7/16 6 2         8         12.7770 13.5640 85.50 69.95 64.75 62.20 59.55 57.45 54.45
13.5  .5315 450135 62.10    7/16 6 2         8         — — — — — — — — —
14.0  .5512 450140 62.10    7/16 6 2         8         13.5650 14.3760 85.50 69.95 64.75 62.20 59.55 57.45 54.45
14.5  .5709 450145 64.15    7/16 6 2         8         14.3770 15.1640 87.50 71.95 66.80 64.25 61.65 59.45 56.50
15.0  .5906 450150 64.15    7/16 6 2         8         — — — — — — — — —
15.5  .6102 450155 64.15    9/16 6 2         9         15.1650 15.9510 87.50 71.95 66.80 64.25 61.65 59.45 56.50
16.0  .6299 450160 65.10    9/16 6 2         9         15.9520 16.7390 88.45 72.95 67.75 65.20 62.60 60.40 57.45
16.5  .6496 450165 65.10    9/16 6 2         9         — — — — — — — — —
17.0  .6693 450170 65.10    9/16 6 2         9         16.7400 17.5510 88.45 72.95 67.75 65.20 62.60 60.40 57.45
17.5  .6890 450175 65.10    9/16 6 2         9         — — — — — — — — —
18.0  .7087 450180 67.65    9/16 6 2         9         17.5520 18.3390 91.00 75.45 70.30 67.75 65.15 62.95 60.00
18.5  .7283 450185 67.65    5/8  6 2         9  1/2  18.3400 19.1260 91.00 75.45 70.30 67.75 65.15 62.95 60.00
19.0  .7480 450190 67.65    5/8  6 2         9  1/2  — — — — — — — — —
19.5  .7677 450195 69.60    5/8  6 2         9  1/2  19.1270 19.9140 92.95 77.50 72.25 69.70 67.10 64.90 61.95
20.0  .7874 450200 69.60    5/8  6 2         9  1/2  19.9150 20.7260 92.95 77.50 72.25 69.70 67.10 64.90 61.95
20.5  .8071 450205 69.60    5/8  6 2         9  1/2  — — — — — — — — —
21.0  .8268 450210 71.90    5/8  6 2         9  1/2  20.7270 21.5140 95.35 79.80 74.60 72.10 69.45 67.30 64.30
21.5  .8465 450215 71.90    5/8  6 2         9  1/2  — — — — — — — — —
22.0  .8661 450220 71.90    3/4  6 2  1/4  10         21.5150 22.3010 95.35 79.80 74.60 72.10 69.45 67.30 64.30
22.5  .8858 450225 85.15    3/4  6 2  1/4  10         22.3020 23.0890 109.45 93.35 87.90 85.25 82.55 80.30 77.20
23.0  .9055 450230 85.15    3/4  6 2  1/4  10         — — — — — — — — —
23.5  .9252 450235 85.15    3/4  8 2  1/4  10         23.0900 23.9010 109.45 93.35 87.90 85.25 82.55 80.30 77.20
24.0  .9449 450240 88.70    3/4  8 2  1/4  10         23.9020 24.6890 112.95 96.90 91.45 88.85 86.15 83.90 80.80
24.5  .9646 450245 88.70    3/4  8 2  1/4  10         — — — — — — — — —
25.0  .9843 450250 88.70    7/8  8 2  1/4  10  1/2  24.6900 25.4760 112.95 96.90 91.45 88.85 86.15 83.90 80.80
25.5 1.0039 450255 90.95    7/8  8 2  1/4  10  1/2  25.4770 27.0760 114.25 98.80 93.60 91.10 88.50 86.35 83.40
26.0 1.0236 450260 90.95    7/8  8 2  1/4  10  1/2  — — — — — — — — —
27.0 1.0630 450270 90.95    7/8  8 2  1/4  10  1/2  — — — — — — — — —
28.0 1.1024 450280 97.55    7/8  8 2  1/4  11         27.0770 28.6510 120.90 105.45 100.25 97.75 95.15 92.95 90.00
29.0 1.1417 450290 101.65 1         8 2  1/4  11         28.6520 30.2390 124.90 109.50 104.30 101.75 99.15 97.00 94.05
30.0 1.1811 450300 101.65 1         8 2  1/4  11         — — — — — — — — —
31.0 1.2205 450310 116.95 1         8 2  1/2  11  1/2  30.2400 31.8260 140.25 124.80 119.65 117.10 114.50 112.30 109.35
32.0 1.2598 450320 116.95 1         8 2  1/2  11  1/2  31.8270 33.4140 140.25 124.80 119.65 117.10 114.50 112.30 109.35
33.0 1.2992 450330 116.95 1         8 2  1/2  11  1/2  — — — — — — — — —
34.0 1.3386 450340 118.55 1         8 2  1/2  12         33.4150 35.0010 141.80 126.40 121.15 118.65 116.05 113.90 110.95
35.0 1.3780 450350 118.55 1         8 2  1/2  12         — — — — — — — — —
36.0 1.4173 450360 129.85 1  1/4  8 2  1/2  12         35.0020 36.5890 153.10 137.70 132.50 129.95 127.40 125.25 122.25
37.0 1.4567 450370 153.85 1  1/4  8 2  1/2  12  1/2  36.5900 38.1760 177.10 161.65 156.50 153.95 151.35 149.20 146.25
38.0 1.4961 450380 153.85 1  1/4  8 2  1/2  12  1/2  — — — — — — — — —
The specifications of the General Purpose Chucking Reamers listed above are only the dimensions that are critical to the application. Please choose the Reamers that meet your specific needs.

Everyone at Hannibal would like to THANK YOU for the privilege of servicing your General Purpose Chucking Reamers needs.