Fractional | Metric | Semi-Finished


TOOL SELECTOR
CHIP
CLASS		MATERIAL MACHINEDTOOL TYPE
 20  NON-FERROUS - LONG CHIPS  410 / 432 
 40  NON-FERROUS - SHORT CHIPS  410 / 432 
 60  CAST IRONS  410 / 436 
 80  LOW STRENGTH STEELS  410 / 438 
 100  MEDIUM STRENGTH STEELS  410 / 438 
 120  HIGH STRENGTH STEELS  410 / 438 
 140  HIGH TEMPERATURE ALLOYS  438

Type 410 Metric - Right Spiral Flutes - Straight Shank
Carbide Tipped
  • Polished flutes
  • Right spiral flutes have greater chip clearing ability for use with ductile materials, highly abrasive materials, or blind holes
  • Finishes are much better as spiral flutes tend to bridge interruptions such as keyways, slots, or intersecting holes
  • Carbide tips brazed to tough hardened alloy steel body
  • Polished flutes for easy chip flow
 		  Modifications: (Prompt delivery)
  • Modified tool diameter - priced below
  • Closer tool diameter tolerance
  • Cutting diameter reduced for step or pilot
  • End chamfer other than 45º
  • End cutting or corner radius
  • Increased / decreased circular margin
  • Increased / decreased tool diameter back taper
  • Shortened shank or reduced shank diameter
  • Flat(s) or tang on shank
  • Coatings available:
     TITANIUM NITRIDE - TiN 
     TITANIUM CARBONITRIDE - TiCN 
     ZIRCONIUM NITRIDE - ZrN 
     AL TITANIUM NITRIDE - AITiN 

Notes
  Tool diameter in millimeters (mm); all other dimensions in inches
Below is a list of standard General Purpose Chucking Reamers offered by Hannibal Carbide Tool. If you do not see the General Purpose Chucking Reamers you are looking for you can click here for our SPECIAL TOOL QUOTE REQUEST FORM and fax (573-221-1140) or email your request to Hannibal. Within 24 hours we will let you know how we can supply your General Purpose Chucking Reamers. For technical assistance with your Reamers please click here to fill out and submit our HANNIBAL TECHNICAL SUPPORT QUESTIONNAIRE.
Tool Diameter Type 410
EDP NO.		 Metric
Price		 Dimensions Finished To Modified Tool Diameter
Shank Diameter No. of Flutes Length Modified Diameter Range (mm) Price Each - Based on Quantity Ordered
mm Inch Flute Carbide Overall Low High 1 2 3 4 5-7 8-14 Over 14
4.5  .1772 410045 $48.60   11/64 4 1  1/8     1/2  4  1/2  4.4940 5.1820 $69.05 $55.50 $50.95 $48.70 $46.45 $44.50 $41.90
5.0  .1969 410050 48.60   11/64 4 1  1/8     1/2  4  1/2  — — — — — — — — —
5.5  .2165 410055 48.60   13/64 4 1  1/4     1/2  5         5.1830 5.6130 69.05 55.50 50.95 48.70 46.45 44.50 41.90
6.0  .2362 410060 48.60    7/32 4 1  1/2     1/2  6         5.6140 6.0450 69.05 55.50 50.95 48.70 46.45 44.50 41.90
– – 410063 –   15/64 4 1  1/2     1/2  6         6.0460 6.4260 69.05 55.50 50.95 48.70 46.45 44.50 41.90
6.5  .2559 410065 48.70   15/64 4 1  1/2     1/2  6         6.4270 7.2140 69.15 55.60 51.05 48.80 46.55 44.65 42.05
7.0  .2756 410070 48.70   15/64 4 1  1/2     1/2  6         — — — — — — — — —
7.5  .2953 410075 48.70    9/32 4 1  1/2     1/2  6         7.2150 8.0010 69.15 55.60 51.05 48.80 46.55 44.65 42.05
8.0  .3150 410080 48.70    9/32 4 1  1/2     1/2  6         — — — — — — — — —
8.5  .3346 410085 52.70    9/32 4 1  1/2     5/8  6         8.0020 8.8140 73.20 59.65 55.00 52.80 50.50 48.65 46.00
9.0  .3543 410090 53.10    5/16 4 1  3/4     5/8  7         8.8150 9.6010 73.55 60.00 55.45 53.20 50.95 49.05 46.45
9.5  .3740 410095 53.10    5/16 4 1  3/4     5/8  7         — — — — — — — — —
10.0  .3937 410100 55.10    5/16 4 1  3/4     5/8  7         9.6020 10.3890 75.60 62.00 57.45 55.25 52.95 51.05 48.45
10.5  .4134 410105 56.90    3/8  4 1  3/4     5/8  7         10.3900 11.2010 77.45 63.80 59.25 57.05 54.75 52.90 50.25
11.0  .4331 410110 56.90    3/8  4 1  3/4     5/8  7         — — — — — — — — —
11.5  .4528 410115 59.90    3/8  4 1  3/4     5/8  7         11.2020 11.9890 80.35 66.80 62.20 60.00 57.70 55.80 53.20
12.0  .4724 410120 67.60    7/16 6 2            5/8  8         11.9900 12.7760 89.40 74.90 70.05 67.70 65.25 63.25 60.40
12.5  .4921 410125 67.60    7/16 6 2            5/8  8         — — — — — — — — —
13.0  .5118 410130 67.60    7/16 6 2            5/8  8         12.7770 13.5640 89.40 74.90 70.05 67.70 65.25 63.25 60.40
13.5  .5315 410135 67.60    7/16 6 2            5/8  8         — — — — — — — — —
14.0  .5512 410140 67.60    7/16 6 2            5/8  8         13.5650 14.3760 89.40 74.90 70.05 67.70 65.25 63.25 60.40
14.5  .5709 410145 69.25    7/16 6 2            5/8  8         14.3770 15.1640 91.10 76.65 71.75 69.40 66.95 64.90 62.15
15.0  .5906 410150 69.25    7/16 6 2            5/8  8         — — — — — — — — —
15.5  .6102 410155 69.25    9/16 6 2  1/4     5/8  9         15.1650 15.9510 91.10 76.65 71.75 69.40 66.95 64.90 62.15
16.0  .6299 410160 73.10    9/16 6 2  1/4     5/8  9         15.9520 16.7390 94.90 80.45 75.60 73.20 70.75 68.75 65.95
16.5  .6496 410165 73.10    9/16 6 2  1/4     5/8  9         — — — — — — — — —
17.0  .6693 410170 75.00    9/16 6 2  1/4     5/8  9         16.7400 17.5510 96.85 82.30 77.50 75.10 72.65 70.65 67.85
17.5  .6890 410175 75.00    9/16 6 2  1/4     5/8  9         — — — — — — — — —
18.0  .7087 410180 76.85    9/16 6 2  1/4     5/8  9         17.5520 18.3390 98.75 84.20 79.35 77.00 74.55 72.55 69.75
18.5  .7283 410185 76.85    5/8  6 2  1/2     3/4  9  1/2  18.3400 19.1260 98.75 84.20 79.35 77.00 74.55 72.55 69.75
19.0  .7480 410190 76.85    5/8  6 2  1/2     3/4  9  1/2  — — — — — — — — —
19.5  .7677 410195 81.00    5/8  6 2  1/2     3/4  9  1/2  19.1270 19.9140 102.80 88.35 83.50 81.10 78.65 76.65 73.85
20.0  .7874 410200 81.00    5/8  6 2  1/2     3/4  9  1/2  19.9150 20.7260 102.80 88.35 83.50 81.10 78.65 76.65 73.85
20.5  .8071 410205 81.00    5/8  6 2  1/2     3/4  9  1/2  — — — — — — — — —
21.0  .8268 410210 84.90    5/8  6 2  1/2     3/4  9  1/2  20.7270 21.5140 106.75 92.20 87.40 85.00 82.55 80.55 77.75
21.5  .8465 410215 84.90    5/8  6 2  1/2     3/4  9  1/2  — — — — — — — — —
22.0  .8661 410220 84.90    3/4  6 2  5/8     3/4  10         21.5150 22.3010 106.75 92.20 87.40 85.00 82.55 80.55 77.75
22.5  .8858 410225 101.00    3/4  6 2  5/8     3/4  10         22.3020 23.0890 123.65 108.65 103.55 101.10 98.55 96.45 93.55
23.0  .9055 410230 101.00    3/4  6 2  5/8     3/4  10         — — — — — — — — —
23.5  .9252 410235 101.00    3/4  8 2  5/8     3/4  10         23.0900 23.9010 123.65 108.65 103.55 101.10 98.55 96.45 93.55
24.0  .9449 410240 105.40    3/4  8 2  5/8     3/4  10         23.9020 24.6890 128.45 113.40 108.35 105.90 103.35 101.25 98.40
24.5  .9646 410245 105.40    3/4  8 2  5/8     3/4  10         — — — — — — — — —
25.0  .9843 410250 105.40    7/8  8 2  3/4     3/4  10  1/2  24.6900 25.4760 128.05 113.05 107.95 105.55 103.00 100.95 98.00
25.5 1.0039 410255 112.35    7/8  8 2  3/4     3/4  10  1/2  25.4770 27.0760 135.05 120.00 114.95 112.50 109.95 107.85 104.95
26.0 1.0236 410260 112.35    7/8  8 2  3/4     3/4  10  1/2  — — — — — — — — —
27.0 1.0630 410270 112.35    7/8  8 2  3/4     3/4  10  1/2  — — — — — — — — —
28.0 1.1024 410280 115.50    7/8  8 2  7/8     7/8  11         27.0770 28.6510 138.15 123.15 118.10 115.60 113.10 111.00 108.15
29.0 1.1417 410290 120.85 1         8 2  7/8     7/8  11         28.6520 30.2390 143.55 128.50 123.40 121.00 118.45 116.40 113.45
30.0 1.1811 410300 120.85 1         8 2  7/8     7/8  11         — — — — — — — — —
31.0 1.2205 410310 127.35 1         8 3            7/8  11  1/2  30.2400 31.8260 150.00 134.95 129.90 127.45 124.90 122.80 119.95
32.0 1.2598 410320 139.80 1         8 3            7/8  11  1/2  31.8270 33.4140 162.55 147.45 142.40 140.00 137.45 135.35 132.45
33.0 1.2992 410330 139.80 1         8 3            7/8  11  1/2  — — — — — — — — —
34.0 1.3386 410340 152.30 1         8 3  1/4     7/8  12         33.4150 35.0010 174.95 159.95 154.90 152.40 149.90 147.80 144.85
35.0 1.3780 410350 152.30 1         8 3  1/4     7/8  12         — — — — — — — — —
36.0 1.4173 410360 160.70 1  1/4  8 3  1/4     7/8  12         35.0020 36.5890 183.35 168.35 163.30 160.80 158.30 156.20 153.35
37.0 1.4567 410370 169.25 1  1/4  8 3  1/2     7/8  12  1/2  36.5900 38.1760 191.90 176.90 171.80 169.35 166.80 164.75 161.80
38.0 1.4961 410380 169.25 1  1/4  8 3  1/2     7/8  12  1/2  — — — — — — — — —
The specifications of the General Purpose Chucking Reamers listed above are only the dimensions that are critical to the application. Please choose the Reamers that meet your specific needs.

Everyone at Hannibal would like to THANK YOU for the privilege of servicing your General Purpose Chucking Reamers needs.