Fractional | Metric | Semi-Finished


TOOL SELECTOR
CHIP
CLASS		MATERIAL MACHINEDTOOL TYPE
 20  NON-FERROUS - LONG CHIPS  465 / 464 
 40  NON-FERROUS - SHORT CHIPS  465 / 464 
 60  CAST IRONS  465 / 466 
 80  LOW STRENGTH STEELS  465 / 468 
 100  MEDIUM STRENGTH STEELS  465 / 468 
 120  HIGH STRENGTH STEELS  465 / 468 
 140  HIGH TEMPERATURE ALLOYS  468

Type 465 Metric - Straight Flute Long Carbide - Straight Shank
Carbide Tipped
  • Expansion screw permits expansion of tool diameter for regrinding after wear without reinserting carbide
  • Straight polished flutes with flute long carbide; Straight shank
  • Carbide tips brazed to tough hardened alloy steel body, except expansion reamers which are not hardened
  • Polished flutes for easy chip flow
 		  Modifications: (Prompt delivery)
  • Modified tool diameter - priced below
  • Closer tool diameter tolerance
  • Cutting diameter reduced for step or pilot
  • End chamfer other than 45ยบ
  • End cutting or corner radius
  • Increased / decreased circular margin
  • Increased / decreased tool diameter back taper
  • Shortened shank or reduced shank diameter
  • Flat(s) or tang on shank
Use:
  • Expansion reamers are recommended for reaming abrasive materials. As the diameter wears down, the reamers can be expanded many times by tightening the end expansion screw and regrinding to its original size. Expansion reamers should not be considered as adjustable for use in producing holes of different sizes.

Notes
  Modified tool diameters are available up to 63mm - contact us for price
Below is a list of standard General Purpose Chucking Reamers offered by Hannibal Carbide Tool. If you do not see the General Purpose Chucking Reamers you are looking for you can click here for our SPECIAL TOOL QUOTE REQUEST FORM and fax (573-221-1140) or email your request to Hannibal. Within 24 hours we will let you know how we can supply your General Purpose Chucking Reamers. For technical assistance with your Reamers please click here to fill out and submit our HANNIBAL TECHNICAL SUPPORT QUESTIONNAIRE.
Tool Diameter Type 465
EDP NO.		 Metric
Price		 Dimensions Finished To Modified Tool Diameter
Shank Diameter No. of Flutes Length Modified Diameter Range (mm) Price Each - Based on Quantity Ordered
mm Inch Flute & Carbide Overall Low High 1 2 3 4 5-7 8-14 Over 14
7.5  .2953 465075 $65.45    9/32 4 1         6         7.2150 8.0010 $87.35 $72.80 $67.95 $65.60 $63.20 $61.15 $58.35
8.0  .3150 465080 65.45    9/32 4 1         6         — — — — — — — — —
8.5  .3346 465085 65.45    9/32 4 1         6         8.0020 8.8140 87.35 72.80 67.95 65.60 63.20 61.15 58.35
9.0  .3543 465090 61.35    5/16 4 1         7         8.8150 9.6010 81.90 68.25 63.70 61.50 59.20 57.35 54.70
9.5  .3740 465095 61.35    5/16 4 1         7         — — — — — — — — —
10.0  .3937 465100 64.55    5/16 4 1         7         9.6020 10.3890 85.00 71.45 66.90 64.65 62.40 60.45 57.90
10.5  .4134 465105 64.55    3/8  4 1         7         10.3900 11.2010 85.00 71.45 66.90 64.65 62.40 60.45 57.90
11.0  .4331 465110 64.55    3/8  4 1         7         — — — — — — — — —
11.5  .4528 465115 67.90    3/8  4 1         7         11.2020 11.9890 88.35 74.80 70.25 68.00 65.70 63.80 61.20
12.0  .4724 465120 67.90    7/16 6 1         8         11.9900 12.7760 88.35 74.80 70.25 68.00 65.70 63.80 61.20
12.5  .4921 465125 67.90    7/16 6 1         8         — — — — — — — — —
13.0  .5118 465130 69.40    7/16 6 1         8         12.7770 13.5640 89.90 76.30 71.70 69.50 67.20 65.35 62.70
13.5  .5315 465135 69.40    7/16 6 1         8         — — — — — — — — —
14.0  .5512 465140 69.40    7/16 6 1  1/8  8         13.5650 14.3760 89.90 76.30 71.70 69.50 67.20 65.35 62.70
14.5  .5709 465145 72.05    7/16 6 1  1/8  8         14.3770 15.1640 92.50 78.90 74.35 72.15 69.85 67.95 65.35
15.0  .5906 465150 72.05    7/16 6 1  1/8  8         — — — — — — — — —
15.5  .6102 465155 72.05    9/16 6 1  1/4  9         15.1650 15.9510 92.50 78.90 74.35 72.15 69.85 67.95 65.35
16.0  .6299 465160 77.90    9/16 6 1  1/4  9         15.9520 16.7390 98.35 84.80 80.25 78.00 75.75 73.85 71.25
16.5  .6496 465165 77.90    9/16 6 1  1/4  9         — — — — — — — — —
17.0  .6693 465170 77.90    9/16 6 1  1/4  9         16.7400 17.5510 98.35 84.80 80.25 78.00 75.75 73.85 71.25
17.5  .6890 465175 77.90    9/16 6 1  1/4  9         — — — — — — — — —
18.0  .7087 465180 80.45    9/16 6 1  1/4  9         17.5520 18.3390 100.95 87.35 82.80 80.55 78.30 76.45 73.80
18.5  .7283 465185 80.45    5/8  6 1  3/8  9  1/2  18.3400 19.1260 100.95 87.35 82.80 80.55 78.30 76.45 73.80
19.0  .7480 465190 80.45    5/8  6 1  3/8  9  1/2  — — — — — — — — —
19.5  .7677 465195 86.00    5/8  6 1  3/8  9  1/2  19.1270 19.9140 106.55 92.95 88.35 86.15 83.85 82.00 79.35
20.0  .7874 465200 86.00    5/8  6 1  3/8  9  1/2  19.9150 20.7260 106.55 92.95 88.35 86.15 83.85 82.00 79.35
20.5  .8071 465205 86.00    5/8  6 1  3/8  9  1/2  — — — — — — — — —
21.0  .8268 465210 89.05    5/8  6 1  3/8  9  1/2  20.7270 21.5140 109.50 95.95 91.35 89.15 86.85 84.95 82.35
21.5  .8465 465215 89.05    5/8  6 1  3/8  9  1/2  — — — — — — — — —
22.0  .8661 465220 89.05    3/4  6 1  1/2  10         21.5150 22.3010 109.50 95.95 91.35 89.15 86.85 84.95 82.35
22.5  .8858 465225 97.80    3/4  6 1  1/2  10         22.3020 23.0890 119.00 104.95 100.20 97.90 95.55 93.55 90.85
23.0  .9055 465230 97.80    3/4  6 1  1/2  10         — — — — — — — — —
23.5  .9252 465235 97.80    3/4  8 1  1/2  10         23.0900 23.9010 119.00 104.95 100.20 97.90 95.55 93.55 90.85
24.0  .9449 465240 101.20    3/4  8 1  1/2  10         23.9020 24.6890 122.45 108.35 103.60 101.30 98.95 96.95 94.25
24.5  .9646 465245 101.20    3/4  8 1  1/2  10         — — — — — — — — —
25.0  .9843 465250 101.20    7/8  8 1  5/8  10  1/2  24.6900 25.4760 122.45 108.35 103.60 101.30 98.95 96.95 94.25
25.5 1.0039 465255 110.00    7/8  8 1  5/8  10  1/2  25.4770 27.0760 131.30 117.15 112.40 110.10 107.75 105.80 103.05
26.0 1.0236 465260 110.00    7/8  8 1  5/8  10  1/2  — — — — — — — — —
27.0 1.0630 465270 110.00    7/8  8 1  5/8  10  1/2  — — — — — — — — —
28.0 1.1024 465280 110.00    7/8  8 1  3/4  11         27.0770 28.6510 131.30 117.15 112.40 110.10 107.75 105.80 103.05
29.0 1.1417 465290 119.20 1         8 1  3/4  11         28.6520 30.2390 140.45 126.35 121.60 119.30 116.95 115.00 112.25
30.0 1.1811 465300 119.20 1         8 1  3/4  11         — — — — — — — — —
31.0 1.2205 465310 119.20 1         8 1  7/8  11  1/2  30.2400 31.8260 140.45 126.35 121.60 119.30 116.95 115.00 112.25
32.0 1.2598 465320 131.20 1         8 1  7/8  11  1/2  31.8270 33.4140 152.40 138.35 133.60 131.30 128.90 126.95 124.25
33.0 1.2992 465330 131.20 1         8 1  7/8  11  1/2  — — — — — — — — —
34.0 1.3386 465340 136.85 1         8 2         12         33.4150 35.0010 158.15 144.05 139.30 137.00 134.65 132.65 129.90
35.0 1.3780 465350 136.85 1         8 2         12         — — — — — — — — —
36.0 1.4173 465360 160.65 1  1/4  8 2         12         35.0020 36.5890 183.30 168.30 163.25 160.75 158.25 156.15 153.30
37.0 1.4567 465370 165.10 1  1/4  8 2  1/8  12  1/2  36.5900 38.1760 187.75 172.70 167.70 165.20 162.70 160.60 157.70
38.0 1.4961 465380 165.10 1  1/4  8 2  1/8  12  1/2  — — — — — — — — —
39.0 1.5354 465390 213.60 1  1/4  8 2  1/8  12  1/2  38.1770 39.7760 236.30 221.25 216.20 213.75 211.20 209.10 206.25
40.0 1.5748 465400 213.60 1  1/4  8 2  1/4  13         39.7770 41.3510 236.30 221.25 216.20 213.75 211.20 209.10 206.25
41.0 1.6142 465410 213.60 1  1/4  8 2  1/4  13         — — — — — — — — —
42.0 1.6535 465420 235.55 1  1/4  8 2  1/4  13         41.3520 42.9510 258.25 243.20 238.15 235.70 233.15 231.05 228.15
43.0 1.6929 465430 235.55 1  1/4  10 2  3/8  13  1/2  42.9520 44.5260 258.25 243.20 238.15 235.70 233.15 231.05 228.15
44.0 1.7323 465440 235.55 1  1/4  10 2  3/8  13  1/2  — — — — — — — — —
The specifications of the General Purpose Chucking Reamers listed above are only the dimensions that are critical to the application. Please choose the Reamers that meet your specific needs.

Everyone at Hannibal would like to THANK YOU for the privilege of servicing your General Purpose Chucking Reamers needs.