Fractional | Metric


TOOL SELECTOR
CHIP
CLASS		MATERIAL MACHINEDTOOL TYPE
 20  NON-FERROUS - LONG CHIPS  414 
 40  NON-FERROUS - SHORT CHIPS  414 / 424 
 60  CAST IRONS  424 
 80  LOW STRENGTH STEELS  434 / 424 
 100  MEDIUM STRENGTH STEELS  434 
 120  HIGH STRENGTH STEELS  434 
 140  HIGH TEMPERATURE ALLOYS  434

Type 434 Metric - For Steels & Hight Temp Alloys
Carbide Tipped
  • Center coolant outlet
  • Polished flutes; flute long carbide on .2841" tool diameter and larger
  • Geometry and carbide grade appropriate for material being machined
  • Carbide tips brazed to tough hardened alloy steel body
  • Polished flutes for easy chip flow
  • Precision ground cutting edges
  • Material specific reamer shanks are ground to next smallest shank diameter listed in NAS 897 if tool diameter is within .005" of shank diameter
 		  Modifications: (Prompt delivery)
  • Modified tool diameter - priced below
  • Metric tool diameter
  • Closer tool diameter tolerance
  • Cutting diameter reduced for step or pilot
  • End chamfer other than 45º
  • End cutting or corner radius
  • Increased / decreased circular margin
  • Increased / decreased tool diameter back taper
  • Shortened shank or reduced shank diameter
  • Flat(s) or tang on shank
  • Coatings available:
     TITANIUM NITRIDE - TiN 
     TITANIUM CARBONITRIDE - TiCN 
     ZIRCONIUM NITRIDE - ZrN 
     AL TITANIUM NITRIDE - AITiN 
Use:
  • Center coolant outlet for reaming blind holes as chips are flushed back towards the shank
  • Improves hole finish and permits higher feeds & speeds with longer tool life

Notes
  EDP No. 434045 - 434070 4.5 mm - 7.0 mm: 1/2" carbide length
Below is a list of standard Coolant Fed Reamers offered by Hannibal Carbide Tool. If you do not see the Coolant Fed Reamers you are looking for you can click here for our SPECIAL TOOL QUOTE REQUEST FORM and fax (573-221-1140) or email your request to Hannibal. Within 24 hours we will let you know how we can supply your Coolant Fed Reamers. For technical assistance with your Reamers please click here to fill out and submit our HANNIBAL TECHNICAL SUPPORT QUESTIONNAIRE.
Tool Diameter Type 434
EDP NO.		 Metric
Price		 Dimensions Finished To Modified Tool Diameter
Max. Shank Diam. No. of Flutes Length Modified Diameter Range (mm) Price Each - Based on Quantity Ordered
mm Inch Flute & Carbide Overall Low High 1 2 3 4 5-7 8-14 Over 14
4.5  .1772 434045 $109.80  .1704 4 1  1/4  5         4.4940 4.6960 $133.25 $117.70 $112.50 $110.00 $107.40 $105.20 $102.20
5.0  .1969 434050 109.80  .1805 4 1  1/4  5         4.6970 5.1820 133.25 117.70 112.50 110.00 107.40 105.20 102.20
5.5  .2165 434055 109.80  .2075 4 1  1/4  5         5.1830 5.6130 133.25 117.70 112.50 110.00 107.40 105.20 102.20
6.0  .2362 434060 109.80  .2265 4 1  1/2  6         5.6140 6.0450 133.25 117.70 112.50 110.00 107.40 105.20 102.20
—  .2480 434063  .2405 4 1  1/2  6         6.0460 6.4260 133.25 117.70 112.50 110.00 107.40 105.20 102.20
6.5  .2559 434065 115.95  .2485 4 1  1/2  6         6.4270 7.2140 139.35 123.80 118.60 116.05 113.45 111.30 108.35
7.0  .2756 434070 115.95  .2485 4 1  1/2  6         — — — — — — — — —
7.5  .2953 434075 121.85  .2792 4 1  1/2  6         7.2150 8.0010 145.25 129.75 124.55 122.00 119.35 117.25 114.20
8.0  .3150 434080 121.85  .2792 4 1  1/2  6         — — — — — — — — —
8.5  .3346 434085 122.75  .2792 4 1  1/2  6         8.0020 8.8140 146.15 130.65 125.40 122.85 120.25 118.10 115.10
9.0  .3543 434090 123.90  .3105 4 1  3/4  7         8.8150 9.6010 147.30 131.75 126.55 124.00 121.40 119.25 116.30
9.5  .3740 434095 123.90  .3105 4 1  3/4  7         — — — — — — — — —
10.0  .3937 434100 124.30  .3105 4 1  3/4  7         9.6020 10.3890 147.65 132.20 126.95 124.40 121.80 119.60 116.65
10.5  .4134 434105 125.40  .3730 6 1  3/4  7         10.3900 11.2010 148.80 133.30 128.10 125.55 122.95 120.80 117.75
11.0  .4331 434110 125.40  .3730 6 1  3/4  7         — — — — — — — — —
11.5  .4528 434115 126.45  .3730 6 1  3/4  7         11.2020 11.9890 149.85 134.30 129.10 126.55 123.95 121.80 118.85
12.0  .4724 434120 127.80  .4355 6 2         8         11.9900 12.7760 151.15 135.70 130.45 127.90 125.30 123.10 120.15
12.5  .4921 434125 127.80  .4355 6 2         8         — — — — — — — — —
13.0  .5118 434130 130.40  .4355 6 2         8         12.7770 13.5640 153.80 138.30 133.05 130.50 127.90 125.70 122.75
13.5  .5315 434135 130.40  .4355 6 2         8         — — — — — — — — —
14.0  .5512 434140 132.10  .4355 6 2         8         13.5650 14.3760 155.50 139.95 134.80 132.25 129.65 127.45 124.45
14.5  .5709 434145 134.60  .4355 6 2         8         14.3770 15.1640 158.05 142.50 137.30 134.80 132.20 130.00 127.00
15.0  .5906 434150 134.60  .4355 6 2         8         — — — — — — — — —
15.5  .6102 434155 137.00  .5615 6 2  1/4  9         15.1650 15.9510 160.40 144.90 139.65 137.10 134.50 132.35 129.35
16.0  .6299 434160 150.50  .5615 6 2  1/4  9         15.9520 16.7390 173.95 158.40 153.20 150.70 148.10 145.90 142.90
16.5  .6496 434165 150.50  .5615 6 2  1/4  9         — — — — — — — — —
17.0  .6693 434170 153.40  .5615 6 2  1/4  9         16.7400 17.5510 176.80 161.30 156.10 153.55 150.95 148.75 145.75
17.5  .6890 434175 153.40  .5615 6 2  1/4  9         — — — — — — — — —
18.0  .7087 434180 159.60  .5615 6 2  1/4  9         17.5520 18.3390 182.95 167.50 162.25 159.70 157.10 154.90 151.95
18.5  .7283 434185 159.60  .6245 6 2  1/2  9  1/2  18.3400 19.1260 182.95 167.50 162.25 159.70 157.10 154.90 151.95
19.0  .7480 434190 159.60  .6245 6 2  1/2  9  1/2  — — — — — — — — —
19.5  .7677 434195 164.00  .6245 6 2  1/2  9  1/2  19.1270 19.9140 187.35 171.85 166.65 164.10 161.50 159.30 156.35
20.0  .7874 434200 164.00  .6245 6 2  1/2  9  1/2  19.9150 20.7260 187.35 171.85 166.65 164.10 161.50 159.30 156.35
20.5  .8071 434205 164.00  .6245 6 2  1/2  9  1/2  — — — — — — — — —
21.0  .8268 434210 169.25  .6245 6 2  1/2  9  1/2  20.7270 21.5140 192.65 177.15 171.95 169.40 166.75 164.60 161.60
21.5  .8465 434215 169.25  .6245 6 2  1/2  9  1/2  — — — — — — — — —
22.0  .8661 434220 169.25  .7495 6 2  5/8  10         21.5150 22.3010 192.65 177.15 171.95 169.40 166.75 164.60 161.60
22.5  .8858 434225 193.80  .7495 6 2  5/8  10         22.3020 23.0890 218.15 202.00 196.65 194.00 191.30 189.05 185.90
23.0  .9055 434230 193.80  .7495 6 2  5/8  10         — — — — — — — — —
23.5  .9252 434235 193.80  .7495 8 2  5/8  10         23.0900 23.9010 218.15 202.00 196.65 194.00 191.30 189.05 185.90
24.0  .9449 434240 194.60  .7495 8 2  5/8  10         23.9020 24.6890 218.85 202.75 197.35 194.70 192.00 189.75 186.65
24.5  .9646 434245 194.60  .7495 8 2  5/8  10         — — — — — — — — —
25.0  .9843 434250 194.60  .8745 8 2  3/4  10  1/2  24.6900 25.4760 218.85 202.75 197.35 194.70 192.00 189.75 186.65
25.5 1.0039 434255 199.75  .8745 8 2  3/4  10  1/2  25.4770 27.0760 224.05 207.95 202.55 199.95 197.25 195.00 191.85
26.0 1.0236 434260 199.75  .8745 8 2  3/4  10  1/2  — — — — — — — — —
27.0 1.0630 434270 199.75  .8745 8 2  3/4  10  1/2  — — — — — — — — —
28.0 1.1024 434280 206.30  .8745 8 2  7/8  11         27.0770 28.6510 230.60 214.50 209.10 206.45 203.70 201.50 198.40
29.0 1.1417 434290 220.20  .9995 8 2  7/8  11         28.6520 30.2390 244.55 228.40 223.05 220.40 217.70 215.45 212.30
30.0 1.1811 434300 220.20  .9995 8 2  7/8  11         — — — — — — — — —
31.0 1.2205 434310 223.05  .9995 8 3         11  1/2  30.2400 31.8260 247.30 231.20 225.80 223.15 220.45 218.20 215.10
32.0 1.2598 434320 229.10  .9995 8 3         11  1/2  31.8270 33.4140 253.40 237.25 231.90 229.25 226.50 224.30 221.15
33.0 1.2992 434330 229.10  .9995 8 3         11  1/2  — — — — — — — — —
34.0 1.3386 434340 237.95  .9995 8 3  1/4  12         33.4150 35.0010 262.25 246.15 240.70 238.05 235.35 233.10 230.00
35.0 1.3780 434350 237.95  .9995 8 3  1/4  12         — — — — — — — — —
36.0 1.4173 434360 245.10  .9995 8 3  1/4  12         35.0020 36.5890 269.35 253.20 247.85 245.20 242.50 240.25 237.15
37.0 1.4567 434370 252.90 1.2495 8 3  1/2  12  1/2  36.5900 38.1760 277.20 261.10 255.70 253.05 250.35 248.10 244.95
38.0 1.4961 434380 252.90 1.2495 8 3  1/2  12  1/2  — — — — — — — — —
The specifications of the Coolant Fed Reamers listed above are only the dimensions that are critical to the application. Please choose the Reamers that meet your specific needs.

Everyone at Hannibal would like to THANK YOU for the privilege of servicing your Coolant Fed Reamers needs.