Extended Length | Fractional


TOOL SELECTOR
CHIP
CLASS		MATERIAL MACHINEDTOOL TYPE
 20  NON-FERROUS - LONG CHIPS  411 
 40  NON-FERROUS - SHORT CHIPS  411 / 413 
 60  CAST IRONS  413 
 80  LOW STRENGTH STEELS  415 / 413 
 100  MEDIUM STRENGTH STEELS  415 
 120  HIGH STRENGTH STEELS  415 
 140  HIGH TEMPERATURE ALLOYS  415

Type 415 Fractional - Center Fed For Blind Holes - For Steels & High Temp Alloys
Carbide Tipped
  • Center coolant outlet
  • Polished flutes; flute long carbide on .2841" tool diameter and larger
  • Geometry and carbide grade appropriate for material being machined
  • Carbide tips brazed to tough hardened alloy steel body
  • Polished flutes for easy chip flow
  • Precision ground cutting edges
  • Material specific reamer shanks are ground to next smallest shank diameter listed in NAS 897 if tool diameter is within .005" of shank diameter
 		  Modifications: (Prompt delivery)
  • Modified tool diameter - priced below
  • Metric tool diameter
  • Closer tool diameter tolerance
  • Cutting diameter reduced for step or pilot
  • End chamfer other than 45º
  • End cutting or corner radius
  • Increased / decreased circular margin
  • Increased / decreased tool diameter back taper
  • Shortened shank or reduced shank diameter
  • Flat(s) or tang on shank
  • Coatings available:
     TITANIUM NITRIDE - TiN 
     TITANIUM CARBONITRIDE - TiCN 
     ZIRCONIUM NITRIDE - ZrN 
     AL TITANIUM NITRIDE - AITiN 
Use:
  • Center coolant outlet for reaming blind holes as chips are flushed back towards the shank
  • Improves hole finish and permits higher feeds & speeds with longer tool life
Below is a list of standard Coolant Fed Reamers offered by Hannibal Carbide Tool. If you do not see the Coolant Fed Reamers you are looking for you can click here for our SPECIAL TOOL QUOTE REQUEST FORM and fax (573-221-1140) or email your request to Hannibal. Within 24 hours we will let you know how we can supply your Coolant Fed Reamers. For technical assistance with your Reamers please click here to fill out and submit our HANNIBAL TECHNICAL SUPPORT QUESTIONNAIRE.
Tool Diameter Type 415
EDP NO.		 Fractional
Price		 Dimensions Finished To Modified Tool Diameter
Max. Shank Diam. No. of Flutes Length Modified Diameter Range Price Each - Based on Quantity Ordered
Frac. Dec. Flute Carbide Overall Low High 1 2 3 4 5-7 8-14*
   1/4   .2500 41508 $102.25  .2405 4 1  1/2     1/2  6          .2381  .2530 $131.25 $116.70 $111.85 $109.50 $107.00 $105.05
   9/32  .2813 41509 104.55  .2485 4 1  1/2     1/2  6          .2531  .2840 132.55 118.55 113.85 111.60 109.25 107.35
   5/16  .3125 41510 114.60  .2792 4 1  1/2  1  1/2  6          .2841  .3150 143.60 129.05 124.20 121.85 119.35 117.40
  11/32  .3438 41511 115.45  .2792 4 1  1/2  1  1/2  6          .3151  .3470 144.50 129.95 125.10 122.75 120.25 118.30
   3/8   .3750 41512 116.65  .3105 4 1  3/4  1  3/4  7          .3471  .3780 145.65 131.10 126.25 123.95 121.50 119.50
  13/32  .4063 41513 117.00  .3105 4 1  3/4  1  3/4  7          .3781  .4090 146.00 131.50 126.60 124.30 121.80 119.85
   7/16  .4375 41514 118.20  .3730 6 1  3/4  1  3/4  7          .4091  .4410 147.25 132.65 127.80 125.50 123.00 121.05
  15/32  .4688 41515 119.25  .3730 6 1  3/4  1  3/4  7          .4411  .4720 148.30 133.70 128.90 126.55 124.05 122.10
   1/2   .5000 41516 123.85  .4355 6 2         2         8          .4721  .5030 153.65 138.70 133.70 131.35 128.80 126.80
  17/32  .5313 41517 128.35  .4355 6 2         2         8          .5031  .5340 158.15 143.20 138.20 135.85 133.30 131.30
   9/16  .5625 41518 128.35  .4355 6 2         2         8          .5341  .5660 158.15 143.20 138.20 135.85 133.30 131.30
  19/32  .5938 41519 133.45  .4355 6 2         2         8          .5661  .5970 163.30 148.35 143.35 141.00 138.45 136.40
   5/8   .6250 41520 133.45  .5615 6 2  1/4  2  1/4  9          .5971  .6280 163.30 148.35 143.35 141.00 138.45 136.40
  21/32  .6563 41521 150.80  .5615 6 2  1/4  2  1/4  9          .6281  .6590 180.55 165.70 160.65 158.30 155.70 153.70
  11/16  .6875 41522 150.80  .5615 6 2  1/4  2  1/4  9          .6591  .6910 180.55 165.70 160.65 158.30 155.70 153.70
  23/32  .7188 41523 157.35  .5615 6 2  1/4  2  1/4  9          .6911  .7220 187.20 172.25 167.25 164.90 162.30 160.25
   3/4   .7500 41524 147.80  .6245 6 2  1/2  2  1/2  9  1/2   .7221  .7530 175.80 161.75 157.10 154.80 152.45 150.50
  25/32  .7813 41525 169.55  .6245 6 2  1/2  2  1/2  9  1/2   .7531  .7840 199.40 184.45 179.45 177.05 174.50 172.45
  13/16  .8125 41526 171.60  .6245 6 2  1/2  2  1/2  9  1/2   .7841  .8160 201.45 186.50 181.55 179.15 176.60 174.60
  27/32  .8438 41527 174.85  .6245 6 2  1/2  2  1/2  9  1/2   .8161  .8470 204.70 189.75 184.75 182.35 179.80 177.80
   7/8   .8750 41528 184.30  .7495 6 2  5/8  2  5/8  10          .8471  .8780 215.20 199.75 194.55 192.10 189.40 187.35
  29/32  .9063 41529 195.25  .7495 6 2  5/8  2  5/8  10          .8781  .9090 226.15 210.70 205.50 203.05 200.35 198.30
  15/16  .9375 41530 204.60  .7495 8 2  5/8  2  5/8  10          .9091  .9410 235.55 220.05 214.90 212.40 209.70 207.65
  31/32  .9688 41531 205.20  .7495 8 2  5/8  2  5/8  10          .9411  .9720 236.10 220.60 215.45 212.95 210.30 208.25
1         1.0000 41532 205.50  .8745 8 2  3/4  2  3/4  10  1/2   .9721 1.0030 236.45 220.95 215.75 213.30 210.65 208.55
1  1/16 1.0625 41534 211.25  .8745 8 2  3/4  2  3/4  10  1/2  1.0031 1.0660 242.15 226.70 221.50 219.00 216.35 214.30
1  1/8  1.1250 41536 218.55  .8745 8 2  7/8  2  7/8  11         1.0661 1.1280 249.55 234.05 228.85 226.40 223.75 221.65
1  3/16 1.1875 41538 234.15  .9995 8 2  7/8  2  7/8  11         1.1281 1.1905 265.10 249.60 244.40 241.95 239.25 237.15
1  1/4  1.2500 41540 237.15  .9995 8 3         3         11  1/2  1.1906 1.2530 268.15 252.60 247.45 244.95 242.35 240.25
1  5/16 1.3125 41542 244.05  .9995 8 3         3         11  1/2  1.2531 1.3155 274.95 259.45 254.25 251.80 249.15 247.05
1  3/8  1.3750 41544 253.95  .9995 8 3  1/4  3  1/4  12         1.3156 1.3780 284.90 269.40 264.20 261.75 259.05 256.95
1  7/16 1.4375 41546 261.85  .9995 8 3  1/4  3  1/4  12         1.3781 1.4405 292.75 277.30 272.10 269.60 266.95 264.90
1  1/2  1.5000 41548 270.70 1.2495 8 3  1/2  3  1/2  12  1/2  1.4406 1.5030 301.60 286.15 280.95 278.45 275.85 273.75
* Quantities of 15 or more - price of fractional size in same size range

The specifications of the Coolant Fed Reamers listed above are only the dimensions that are critical to the application. Please choose the Reamers that meet your specific needs.

Everyone at Hannibal would like to THANK YOU for the privilege of servicing your Coolant Fed Reamers needs.