Fractional


Type 357 Fractional - For Steels
Carbide Tipped
  • Coolant outlets in each flute
  • 15ยบ right spiral flutes for improved chip removal
  • Improves finish and permits higher feeds & speeds
  • Radial edged for longer tool life
  • Tool geometry and carbide grade appropriate for material being machined
  • Geometry and carbide grade, O.D. relief and end clearance appropriate for material being machined
  • Flute long carbide tips brazed to tough hardened alloy steel body
  • Spiral flute carbide tips formed to true helix angles
  • Straight shanks have standard Weldon drive flats
  • Non-center cutting end mills have the ends cleared to depth of carbide
 		  Modifications: (Prompt delivery)
  • Modified tool diameter
  • Metric tool diameter
  • Cutting diameter reduced for step or pilot
  • Corner chamfer or corner radius
  • Shortened shank or reduced shank diameter
  • Additional shank drive flat(s)
  • Coolant outlets
  • Stocked coated tools priced below
  • Coatings available:
    •  TITANIUM NITRIDE - TiN 
     TITANIUM CARBONITRIDE - TiCN 
     ZIRCONIUM NITRIDE - ZrN 
     AL TITANIUM NITRIDE - AITiN 
Use:
  • For peripheral or slot milling

Notes
  When ordering stocked coated tools, specify TiN, TiCN or TiAIN after EDP No.
Below is a list of standard Coolant Fed End Mills offered by Hannibal Carbide Tool. If you do not see the Coolant Fed End Mills you are looking for you can click here for our SPECIAL TOOL QUOTE REQUEST FORM and fax (573-221-1140) or email your request to Hannibal. Within 24 hours we will let you know how we can supply your Coolant Fed End Mills. For technical assistance with your End Mills please click here to fill out and submit our HANNIBAL TECHNICAL SUPPORT QUESTIONNAIRE.
Tool Diameter Dimensions Type 357
EDP NO.		 Price
Shank Diameter No. of Flutes Length
Frac. Dec. Carbide Overall
   5/8   .6250    5/8  4 1  1/4  3  3/8  35721 $202.45
  11/16  .6875    5/8  4 1  1/4  3  3/8  35723 206.20
   3/4   .7500    5/8  4 1  1/4  3  3/8  35725 208.85
  13/16  .8125    5/8  4 1  1/2  3  5/8  35726 216.20
   7/8   .8750    7/8  4 1  1/2  3  3/4  35729 222.55
  15/16  .9375    7/8  4 1  1/2  3  3/4  35731 274.55
1         1.0000 1         6 1  1/2  4         35733 266.05
1  1/4  1.2500 1         6 1  3/4  4  1/4  35740 323.40
1  1/2  1.5000 1  1/4  6 2         4  1/2  35748 354.20
2         2.0000 1  1/4  8 2         4  1/2  35764 496.85
The specifications of the Coolant Fed End Mills listed above are only the dimensions that are critical to the application. Please choose the End Mills that meet your specific needs.

Everyone at Hannibal would like to THANK YOU for the privilege of servicing your Coolant Fed End Mills needs.