Fractional | Metric


TOOL SELECTOR
CHIP
CLASS		MATERIAL MACHINEDTOOL TYPE
 20  NON-FERROUS - LONG CHIPS  630 
 40  NON-FERROUS - SHORT CHIPS  630 / 631 
 60  CAST IRONS  631 / 630 
 80  LOW STRENGTH STEELS  CALL US 
 100  MEDIUM STRENGTH STEELS  CALL US 
 120  HIGH STRENGTH STEELS  CALL US 
 140  HIGH TEMPERATURE ALLOYS  CALL US

Type 630 Metric - 118ยบ Standard Point
Carbide Tipped
  • Tanged, straight shank, taper length
  • Longer flute and overall lengths than jobbers length drills
  • Carbide tip high temperature brazed to hardened tool steel body
  • Smooth flutes for effective chip flow
  • Precision ground to insure concentricity of tip & body
  • All dimensional & element tolerances conform to one of:
    ASME/ANSI B94.11M
    ISO - International Organization for Standardization
    NAS 907 - National Aerospace Standards
    USCTI - United States Cutting Tool Institute (formerly MCTI)
 		  Modifications: (Prompt delivery)
  • Modified tool diameter
  • Modified metric tool diameter
  • Modified point and / or angle
  • Reduced shank diameter
  • Coatings available:
    •  TITANIUM NITRIDE - TiN 
     TITANIUM CARBONITRIDE - TiCN 
     ZIRCONIUM NITRIDE - ZrN 
     AL TITANIUM NITRIDE - AITiN 
Use:
  • The longer length of these drills increases their effective reach through drill bushings
  • For use in ASA split sleeve drill drivers
Below is a list of standard Taper Length Drills offered by Hannibal Carbide Tool. If you do not see the Taper Length Drills you are looking for you can click here for our SPECIAL TOOL QUOTE REQUEST FORM and fax (573-221-1140) or email your request to Hannibal. Within 24 hours we will let you know how we can supply your Taper Length Drills. For technical assistance with your Drills please click here to fill out and submit our HANNIBAL TECHNICAL SUPPORT QUESTIONNAIRE.
Tool Diameter Length Type 630
EDP NO.		 Metric
Price
Flute Overall
mm Inch mm Inch mm Inch
3.2  .1260 76.0 3         137.0 5  3/8  630032 $17.70
3.3  .1299 76.0 3         137.0 5  3/8  630033 17.70
3.4  .1339 76.0 3         137.0 5  3/8  630034 17.70
3.5  .1378 76.0 3         137.0 5  3/8  630035 17.15
3.6  .1417 76.0 3         137.0 5  3/8  630036 17.15
3.7  .1457 76.0 3         137.0 5  3/8  630037 17.15
3.8  .1496 76.0 3         137.0 5  3/8  630038 17.15
3.9  .1535 76.0 3         137.0 5  3/8  630039 17.15
4.0  .1575 86.0 3  3/8  146.0 5  3/4  630040 16.80
4.1  .1614 86.0 3  3/8  146.0 5  3/4  630041 17.70
4.2  .1654 86.0 3  3/8  146.0 5  3/4  630042 17.70
4.3  .1693 86.0 3  3/8  146.0 5  3/4  630043 17.70
4.4  .1732 86.0 3  3/8  146.0 5  3/4  630044 18.65
4.5  .1772 86.0 3  3/8  146.0 5  3/4  630045 18.65
4.6  .1811 86.0 3  3/8  146.0 5  3/4  630046 18.65
4.7  .1850 86.0 3  3/8  146.0 5  3/4  63213 19.90
4.8  .1890 92.0 3  5/8  152.0 6         63212 21.00
4.9  .1929 92.0 3  5/8  152.0 6         630049 18.65
5.0  .1969 92.0 3  5/8  152.0 6         630050 19.55
5.1  .2008 92.0 3  5/8  152.0 6         630051 19.40
5.2  .2047 92.0 3  5/8  152.0 6         630052 17.45
5.3  .2087 92.0 3  5/8  152.0 6         630053 19.40
5.4  .2126 92.0 3  5/8  152.0 6         630054 19.40
5.5  .2165 92.0 3  5/8  152.0 6         630055 20.85
5.6  .2205 95.0 3  3/4  156.0 6  1/8  630056 19.40
5.7  .2244 95.0 3  3/4  156.0 6  1/8  630057 19.40
5.8  .2283 95.0 3  3/4  156.0 6  1/8  630058 19.40
5.9  .2323 95.0 3  3/4  156.0 6  1/8  630059 20.20
6.0  .2362 95.0 3  3/4  156.0 6  1/8  630060 21.60
6.1  .2402 95.0 3  3/4  156.0 6  1/8  630061 21.50
6.2  .2441 95.0 3  3/4  156.0 6  1/8  630062 21.50
6.3  .2480 95.0 3  3/4  156.0 6  1/8  630063 21.50
6.4  .2520 98.0 3  7/8  159.0 6  1/4  630064 23.60
6.5  .2559 98.0 3  7/8  159.0 6  1/4  630065 22.40
6.6  .2598 98.0 3  7/8  159.0 6  1/4  630066 24.35
6.7  .2638 98.0 3  7/8  159.0 6  1/4  630067 24.35
6.8  .2677 98.0 3  7/8  159.0 6  1/4  630068 24.35
6.9  .2717 98.0 3  7/8  159.0 6  1/4  630069 24.35
7.0  .2756 98.0 3  7/8  159.0 6  1/4  630070 23.35
7.1  .2795 98.0 3  7/8  159.0 6  1/4  630071 24.35
7.2  .2835 102.0 4         162.0 6  3/8  630072 24.35
7.3  .2874 102.0 4         162.0 6  3/8  630073 24.35
7.4  .2913 102.0 4         162.0 6  3/8  630074 24.35
7.5  .2953 102.0 4         162.0 6  3/8  630075 24.75
7.6  .2992 102.0 4         162.0 6  3/8  630076 25.50
7.7  .3031 102.0 4         162.0 6  3/8  630077 25.50
7.8  .3071 102.0 4         162.0 6  3/8  630078 25.50
7.9  .3110 102.0 4         162.0 6  3/8  630079 25.50
8.0  .3150 105.0 4  1/8  165.0 6  1/2  630080 25.10
8.1  .3189 105.0 4  1/8  165.0 6  1/2  630081 25.50
8.2  .3228 105.0 4  1/8  165.0 6  1/2  630082 27.20
8.3  .3268 105.0 4  1/8  165.0 6  1/2  630083 27.20
8.4  .3307 105.0 4  1/8  165.0 6  1/2  630084 27.20
8.5  .3346 105.0 4  1/8  165.0 6  1/2  630085 26.30
8.6  .3386 105.0 4  1/8  165.0 6  1/2  630086 28.95
8.7  .3425 105.0 4  1/8  165.0 6  1/2  630087 28.95
8.8  .3465 108.0 4  1/4  171.0 6  3/4  630088 28.95
8.9  .3504 108.0 4  1/4  171.0 6  3/4  630089 28.95
9.0  .3543 108.0 4  1/4  171.0 6  3/4  630090 28.45
9.1  .3583 108.0 4  1/4  171.0 6  3/4  630091 31.70
9.2  .3622 108.0 4  1/4  171.0 6  3/4  630092 31.70
9.3  .3661 108.0 4  1/4  171.0 6  3/4  630093 31.70
9.4  .3701 108.0 4  1/4  171.0 6  3/4  630094 31.70
9.5  .3740 108.0 4  1/4  171.0 6  3/4  630095 29.15
9.6  .3780 111.0 4  3/8  178.0 7         630096 33.30
9.7  .3819 111.0 4  3/8  178.0 7         630097 33.30
9.8  .3858 111.0 4  3/8  178.0 7         630098 33.30
9.9  .3898 111.0 4  3/8  178.0 7         630099 33.30
10.0  .3937 111.0 4  3/8  178.0 7         630100 30.60
10.1  .3976 111.0 4  3/8  178.0 7         630101 34.05
10.2  .4016 111.0 4  3/8  178.0 7         630102 35.50
10.3  .4055 111.0 4  3/8  178.0 7         630103 35.50
10.4  .4094 117.0 4  5/8  184.0 7  1/4  630104 37.10
10.5  .4134 117.0 4  5/8  184.0 7  1/4  630105 34.85
10.6  .4173 117.0 4  5/8  184.0 7  1/4  630106 38.85
10.7  .4213 117.0 4  5/8  184.0 7  1/4  630107 38.85
10.8  .4252 117.0 4  5/8  184.0 7  1/4  630108 38.85
10.9  .4291 117.0 4  5/8  184.0 7  1/4  630109 38.85
11.0  .4331 117.0 4  5/8  184.0 7  1/4  630110 37.70
11.5  .4528 121.0 4  3/4  190.0 7  1/2  630115 42.30
12.0  .4724 121.0 4  3/4  197.0 7  3/4  630120 45.75
12.5  .4921 121.0 4  3/4  197.0 7  3/4  630125 47.40
13.0  .5118 121.0 4  3/4  203.0 8         630130 48.60
13.5  .5315 121.0 4  3/4  203.0 8         630135 51.60
14.0  .5512 124.0 4  7/8  210.0 8  1/4  630140 54.80
14.5  .5709 124.0 4  7/8  222.0 8  3/4  630145 58.80
15.0  .5906 124.0 4  7/8  222.0 8  3/4  630150 58.80
15.5  .6102 124.0 4  7/8  222.0 8  3/4  630155 66.65
16.0  .6299 130.0 5  1/8  229.0 9         630160 66.65
16.5  .6496 130.0 5  1/8  229.0 9         630165 71.20
17.0  .6693 137.0 5  3/8  235.0 9  1/4  630170 69.05
17.5  .6890 143.0 5  5/8  241.0 9  1/2  630175 69.05
18.0  .7087 143.0 5  5/8  241.0 9  1/2  630180 70.55
18.5  .7283 149.0 5  7/8  248.0 9  3/4  630185 72.10
19.0  .7480 149.0 5  7/8  248.0 9  3/4  630190 72.10
19.5  .7677 152.0 6         251.0 9  7/8  630195 82.80
20.0  .7874 156.0 6  1/8  254.0 10         630200 83.15
20.5  .8071 156.0 6  1/8  254.0 10         630205 83.15
21.0  .8268 156.0 6  1/8  254.0 10         630210 83.15
21.5  .8465 156.0 6  1/8  254.0 10         630215 83.15
22.0  .8661 156.0 6  1/8  254.0 10         630220 88.00
22.5  .8858 156.0 6  1/8  254.0 10         630225 91.05
23.0  .9055 156.0 6  1/8  254.0 10         630230 91.05
23.5  .9252 156.0 6  1/8  273.0 10  3/4  630235 92.35
24.0  .9449 162.0 6  3/8  279.0 11         630240 96.65
24.5  .9646 162.0 6  3/8  279.0 11         630245 96.65
25.0  .9843 162.0 6  3/8  279.0 11         630250 99.70
The specifications of the Taper Length Drills listed above are only the dimensions that are critical to the application. Please choose the Drills that meet your specific needs.

Everyone at Hannibal would like to THANK YOU for the privilege of servicing your Taper Length Drills needs.