Fractional


Type 684 Fractional - High Helix (Fast Spiral) - 18" Length
Carbide Tipped
  • Carbide tip brazed to tough steel body
  • Carbide tip is larger than the tool diameter listed to provide clearance for installation of anchor screws, expansion shields and toggle bolts
 		 
Use:
  • Designed for use in portable electric drills
  • For drilling masonry including concrete, plaster, wall board, stone, brick, marble, slate, carbon, asphalt and cement
  • Performs best at moderate pressure and slow speeds
  • Keep drill cutting rather than rubbing
  • On deep holes, withdraw frequently to prevent clogging
  • Use punch or star type hand drill to shatter obstructions such as glazed rock
Below is a list of standard Masonry Drills offered by Hannibal Carbide Tool. If you do not see the Masonry Drills you are looking for you can click here for our SPECIAL TOOL QUOTE REQUEST FORM and fax (573-221-1140) or email your request to Hannibal. Within 24 hours we will let you know how we can supply your Masonry Drills. For technical assistance with your Drills please click here to fill out and submit our HANNIBAL TECHNICAL SUPPORT QUESTIONNAIRE.
Tool Diameter Shank Diameter Type 684
EDP NO.		 Fractional
Price
   1/4     1/4  68416 $14.85
   5/16    1/4  68420 17.25
   3/8     1/4  68424 18.20
   7/16    1/4  68428 19.90
   1/2     3/8  68432 20.45
   9/16    3/8  68436 22.25
   5/8     1/2  68440 25.00
  11/16    1/2  68444 26.90
   3/4     1/2  68448 28.80
   7/8     1/2  68456 36.00
1            1/2  68464 39.40
The specifications of the Masonry Drills listed above are only the dimensions that are critical to the application. Please choose the Drills that meet your specific needs.

Everyone at Hannibal would like to THANK YOU for the privilege of servicing your Masonry Drills needs.