Hannibal Carbide Tool Inc.

Search

• PRODUCTS
• Spotlight
• Company Profile
• Advantages
• Request Info
• Tech Support
• Contact Us

• Reamers
  • Coolant Fed
  • Extended Length
  • General Purpose
  • Material Specific
  • Pipe Tap
  • Semi-Finished
  • Shell Reamers & Arbors
  • Step
  • Solid Carbide
• Drills
  • Aircraft Extension
  • Coolant Fed
  • Core
  • Glass & Tile
  • Hard Steel Die
  • Jobbers Length
  • Masonry
  • Reduced Shank Diameter
  • Spotting/Centering (CNC)
  • Stub Length (CNC)
  • Taper Length
  • Taper Shank
• Counterbores
  • Aircraft
  • Capscrew
  • Pilots
  • Straight Shank
  • Taper Shank
  • Stub Length
• Milling Cutters
  • Arbor Hole Type
  • Shank Type
• End Mills
  • Center Cutting
  • Coolant Fed
  • High Spiral Shear Cutting
  • Slow Spiral
  • Straight Flutes
• Port Contour
  Cutters
  • A.N.D. 10050 Integral Reamer Pilot
  • ISO 6149-1 Metric Port w/o I.D. Groove
  • Metric Port Reamer Pilot Series
  • MS33649 Integral Reamer Pilot
  • S.A.E. - MS16142 - J514F - J1926
• Centers
  • Brown & Sharpe
  • Jarno
  • Morse
• Countersinks
  • Single Flute
  • Three Flute
• Single Points
  • Premium C2
  • Premium C5 - C6
  • S.A. Series Swiss Automatic Tool

Fractional | Metric | Reduced Shank Fractional

TOOL SELECTOR CHIP CLASS MATERIAL MACHINED TOOL TYPE  20   NON-FERROUS - LONG CHIPS   600   40   NON-FERROUS - SHORT CHIPS   600 / 601   60   CAST IRONS   601 / 600   80   LOW STRENGTH STEELS   CALL US   100   MEDIUM STRENGTH STEELS   CALL US   120   HIGH STRENGTH STEELS   CALL US   140   HIGH TEMPERATURE ALLOYS   CALL US
Type 600 Metric - 118º Standard Point Carbide Tipped Jobbers length - 118º standard point Carbide tip high temperature brazed to hardened tool steel body Smooth flutes for effective chip flow Precision ground to insure concentricity of tip & body All dimensional & element tolerances conform to one of: ASME/ANSI B94.11M ISO - International Organization for Standardization NAS 907 - National Aerospace Standards USCTI - United States Cutting Tool Institute (formerly MCTI)		Modifications: (Prompt delivery) Modified tool diameter Modified metric tool diameter Modified point and / or angle Reduced shank diameter Flat(s) on shank Tanged shank Coatings available:  TITANIUM NITRIDE - TiN   TITANIUM CARBONITRIDE - TiCN   ZIRCONIUM NITRIDE - ZrN   AL TITANIUM NITRIDE - AITiN
Use: The most popular carbide tipped drill - will perform satisfactorily under a variety of conditions

Below is a list of standard Jobbers Length Drills offered by Hannibal Carbide Tool. If you do not see the Jobbers Length Drills you are looking for you can click here for our SPECIAL TOOL QUOTE REQUEST FORM and fax (573-221-1140) or email your request to Hannibal. Within 24 hours we will let you know how we can supply your Jobbers Length Drills. For technical assistance with your Drills please click here to fill out and submit our HANNIBAL TECHNICAL SUPPORT QUESTIONNAIRE.

Tool Diameter		Length				Type 600 EDP NO.	Metric Price
		Flute		Overall
mm	Inch	mm	Inch	mm	Inch
3.0	.1181	41.0	1  5/8	70.0	2  3/4	600030	$14.45
3.1	.1220	41.0	1  5/8	70.0	2  3/4	600031	15.10
3.2	.1260	41.0	1  5/8	70.0	2  3/4	600032	15.10
3.3	.1299	44.0	1  3/4	73.0	2  7/8	600033	15.10
3.4	.1339	44.0	1  3/4	73.0	2  7/8	600034	15.10
3.5	.1378	44.0	1  3/4	73.0	2  7/8	600035	13.95
3.6	.1417	48.0	1  7/8	76.0	3	600036	14.45
3.7	.1457	48.0	1  7/8	76.0	3	600037	14.45
3.8	.1496	48.0	1  7/8	76.0	3	600038	14.45
3.9	.1535	51.0	2	79.0	3  1/8	600039	14.45
4.0	.1575	54.0	2  1/8	83.0	3  1/4	600040	13.60
4.1	.1614	54.0	2  1/8	83.0	3  1/4	600041	13.10
4.2	.1654	54.0	2  1/8	83.0	3  1/4	600042	13.95
4.3	.1693	54.0	2  1/8	83.0	3  1/4	600043	13.95
4.4	.1732	56.0	2  3/16	86.0	3  3/8	600044	13.95
4.5	.1772	56.0	2  3/16	86.0	3  3/8	600045	14.45
4.6	.1811	56.0	2  3/16	86.0	3  3/8	600046	15.75
4.7	.1850	59.0	2  5/16	89.0	3  1/2	60213	13.35
4.8	.1890	59.0	2  5/16	89.0	3  1/2	60212	13.95
4.9	.1929	62.0	2  7/16	92.0	3  5/8	600049	15.75
5.0	.1969	62.0	2  7/16	92.0	3  5/8	600050	15.10
5.1	.2008	62.0	2  7/16	92.0	3  5/8	600051	16.40
5.2	.2047	64.0	2  1/2	95.0	3  3/4	600052	16.40
5.3	.2087	64.0	2  1/2	95.0	3  3/4	600053	16.40
5.4	.2126	64.0	2  1/2	95.0	3  3/4	600054	16.40
5.5	.2165	64.0	2  1/2	95.0	3  3/4	600055	16.05
5.6	.2205	67.0	2  5/8	98.0	3  7/8	600056	16.85
5.7	.2244	67.0	2  5/8	98.0	3  7/8	600057	16.85
5.8	.2283	67.0	2  5/8	98.0	3  7/8	600058	16.85
5.9	.2323	67.0	2  5/8	98.0	3  7/8	600059	16.85
6.0	.2362	70.0	2  3/4	102.0	4	600060	16.65
6.1	.2402	70.0	2  3/4	102.0	4	600061	17.60
6.2	.2441	70.0	2  3/4	102.0	4	600062	17.60
6.3	.2480	70.0	2  3/4	102.0	4	600063	17.60
6.4	.2520	73.0	2  7/8	105.0	4  1/8	600064	17.60
6.5	.2559	73.0	2  7/8	105.0	4  1/8	600065	17.25
6.6	.2598	73.0	2  7/8	105.0	4  1/8	600066	18.40
6.7	.2638	73.0	2  7/8	105.0	4  1/8	600067	18.40
6.8	.2677	73.0	2  7/8	105.0	4  1/8	600068	18.40
6.9	.2717	73.0	2  7/8	105.0	4  1/8	600069	18.40
7.0	.2756	73.0	2  7/8	105.0	4  1/8	600070	18.00
7.1	.2795	75.0	2 15/16	108.0	4  1/4	600071	18.85
7.2	.2835	75.0	2 15/16	108.0	4  1/4	600072	18.85
7.3	.2874	75.0	2 15/16	108.0	4  1/4	600073	18.85
7.4	.2913	78.0	3  1/16	111.0	4  3/8	600074	18.85
7.5	.2953	78.0	3  1/16	111.0	4  3/8	600075	18.85
7.6	.2992	78.0	3  1/16	111.0	4  3/8	600076	19.75
7.7	.3031	81.0	3  3/16	114.0	4  1/2	600077	19.75
7.8	.3071	81.0	3  3/16	114.0	4  1/2	600078	19.75
7.9	.3110	81.0	3  3/16	114.0	4  1/2	600079	19.75
8.0	.3150	81.0	3  3/16	114.0	4  1/2	600080	19.30
8.1	.3189	84.0	3  5/16	117.0	4  5/8	600081	21.10
8.2	.3228	84.0	3  5/16	117.0	4  5/8	600082	21.10
8.3	.3268	84.0	3  5/16	117.0	4  5/8	600083	21.10
8.4	.3307	87.0	3  7/16	121.0	4  3/4	600084	21.10
8.5	.3346	87.0	3  7/16	121.0	4  3/4	600085	20.20
8.6	.3386	87.0	3  7/16	121.0	4  3/4	600086	21.10
8.7	.3425	87.0	3  7/16	121.0	4  3/4	600087	21.10
8.8	.3465	89.0	3  1/2	124.0	4  7/8	600088	21.10
8.9	.3504	89.0	3  1/2	124.0	4  7/8	600089	21.10
9.0	.3543	89.0	3  1/2	124.0	4  7/8	600090	20.60
9.1	.3583	89.0	3  1/2	124.0	4  7/8	600091	22.85
9.2	.3622	92.0	3  5/8	127.0	5	600092	22.85
9.3	.3661	92.0	3  5/8	127.0	5	600093	22.85
9.4	.3701	92.0	3  5/8	127.0	5	600094	22.85
9.5	.3740	92.0	3  5/8	127.0	5	600095	22.40
9.6	.3780	95.0	3  3/4	130.0	5  1/8	600096	23.20
9.7	.3819	95.0	3  3/4	130.0	5  1/8	600097	23.20
9.8	.3858	95.0	3  3/4	130.0	5  1/8	600098	23.20
9.9	.3898	95.0	3  3/4	130.0	5  1/8	600099	23.20
10.0	.3937	95.0	3  3/4	130.0	5  1/8	600100	23.20
10.1	.3976	98.0	3  7/8	133.0	5  1/4	600101	27.65
10.2	.4016	98.0	3  7/8	133.0	5  1/4	600102	27.65
10.3	.4055	98.0	3  7/8	133.0	5  1/4	600103	27.65
10.4	.4094	98.0	3  7/8	133.0	5  1/4	600104	27.65
10.5	.4134	98.0	3  7/8	133.0	5  1/4	600105	26.75
10.6	.4173	100.0	3 15/16	137.0	5  3/8	600106	30.30
10.7	.4213	100.0	3 15/16	137.0	5  3/8	600107	30.30
10.8	.4252	103.0	4  1/16	140.0	5  1/2	600108	30.30
10.9	.4291	103.0	4  1/16	140.0	5  1/2	600109	30.30
11.0	.4331	103.0	4  1/16	140.0	5  1/2	600110	29.00
11.1	.4370	103.0	4  1/16	140.0	5  1/2	600111	33.80
11.2	.4409	106.0	4  3/16	143.0	5  5/8	600112	33.80
11.3	.4449	106.0	4  3/16	143.0	5  5/8	600113	33.80
11.4	.4488	106.0	4  3/16	143.0	5  5/8	600114	33.80
11.5	.4528	106.0	4  3/16	143.0	5  5/8	600115	32.50
11.6	.4567	110.0	4  5/16	146.0	5  3/4	600116	36.85
11.7	.4606	110.0	4  5/16	146.0	5  3/4	600117	36.85
11.8	.4646	110.0	4  5/16	146.0	5  3/4	600118	36.85
11.9	.4685	110.0	4  5/16	146.0	5  3/4	600119	36.85
12.0	.4724	111.0	4  3/8	149.0	5  7/8	600120	35.20
12.1	.4764	111.0	4  3/8	149.0	5  7/8	600121	38.30
12.2	.4803	111.0	4  3/8	149.0	5  7/8	600122	38.30
12.3	.4843	111.0	4  3/8	149.0	5  7/8	600123	38.30
12.4	.4882	114.0	4  1/2	152.0	6	600124	38.30
12.5	.4921	114.0	4  1/2	152.0	6	600125	36.50
12.6	.4961	114.0	4  1/2	152.0	6	600126	39.65
12.7	.5000	114.0	4  1/2	152.0	6	60032	33.70
12.8	.5039	114.0	4  1/2	152.0	6	600128	43.50
12.9	.5079	114.0	4  1/2	152.0	6	600129	43.50
13.0	.5118	114.0	4  1/2	152.0	6	600130	43.50
13.5	.5315	122.0	4 13/16	168.0	6  5/8	600135	56.30
14.0	.5512	122.0	4 13/16	168.0	6  5/8	600140	59.70
14.5	.5709	122.0	4 13/16	168.0	6  5/8	600145	64.00
15.0	.5906	132.0	5  3/16	181.0	7  1/8	600150	64.00
15.5	.6102	132.0	5  3/16	181.0	7  1/8	600155	64.85
16.0	.6299	132.0	5  3/16	181.0	7  1/8	600160	66.05
16.5	.6496	132.0	5  3/16	181.0	7  1/8	600165	66.05
17.0	.6693	143.0	5  5/8	194.0	7  5/8	600170	68.60
17.5	.6890	143.0	5  5/8	194.0	7  5/8	600175	68.60
18.0	.7087	143.0	5  5/8	194.0	7  5/8	600180	69.40
18.5	.7283	143.0	5  5/8	194.0	7  5/8	600185	69.75
19.0	.7480	148.0	5 13/16	203.0	8	600190	70.65

The specifications of the Jobbers Length Drills listed above are only the dimensions that are critical to the application. Please choose the Drills that meet your specific needs.

Everyone at Hannibal would like to THANK YOU for the privilege of servicing your Jobbers Length Drills needs.

Hannibal Carbide Tool, Inc.

Industrial Supply Association

Value Added Partner