Fractional | Metric


TOOL SELECTOR
CHIP
CLASS		MATERIAL MACHINEDTOOL TYPE
 20  NON-FERROUS - LONG CHIPS  620 or 622 
 40  NON-FERROUS - SHORT CHIPS  620 or 622 
 60  CAST IRONS  620 or 622 
 80  LOW STRENGTH STEELS  621 or 623 
 100  MEDIUM STRENGTH STEELS  621 or 623 
 120  HIGH STRENGTH STEELS  621 or 623 
 140  HIGH TEMPERATURE ALLOYS  620 or 622

Type 623 Metric - Taper Shank For Machining Steels
Carbide Tipped
  • Special carbide grade & tool geometry permit the heavy chip loads and speeds required for machining steel - taper shank
  • Not to be used for machining non-ferrous materials, cast irons, or high temp alloys
  • Four large right spiral polished flutes permit higher feeds and speeds
  • Carbide tips brazed to hardened tool steel body
  • 118º included chamfer angle
  • Rigid design provides maximum support for the carbide tips
  • Tool diameter tolerance: plus .000", minus .001"
 		  Modifications: (Prompt delivery)
  • Modified tool diameter - priced below
  • Closer tool diameter tolerance
  • End chamfer other than 118º included angle
  • End cutting or corner radius
  • Shank whistle notch for set screw
  • Smaller taper shank
  • Coatings available:
    •  TITANIUM NITRIDE - TiN 
     TITANIUM CARBONITRIDE - TiCN 
     ZIRCONIUM NITRIDE - ZrN 
     AL TITANIUM NITRIDE - AITiN 
Use:
  • Designed for economically enlarging cored, punched, or drilled holes - can remove up to 30% of the tool diameter
  • The balanced cutting action of the core drill removes considerably more material than a reamer, often eliminating the need for a final reaming or boring operation

Notes
  EDP No. 623090 - 623119: 3 Flutes
Below is a list of standard Core Drills offered by Hannibal Carbide Tool. If you do not see the Core Drills you are looking for you can click here for our SPECIAL TOOL QUOTE REQUEST FORM and fax (573-221-1140) or email your request to Hannibal. Within 24 hours we will let you know how we can supply your Core Drills. For technical assistance with your Drills please click here to fill out and submit our HANNIBAL TECHNICAL SUPPORT QUESTIONNAIRE.
Tool Diameter Dimensions Type 623
EDP NO.		 Metric
Price		 Finished To Modified Tool Diameter
Min. Cut Diam. Taper Shank No. Length Modified Diameter Range (mm) Price Each - Based on Quantity Ordered
mm Inch Flute Carbide Overall Low High 1 2 3 4 5-7 8-14 Over 14
—   63/64 4 4  7/8  1         10  1/2  623359 $ 35.0020 35.7890 $199.65 $185.70 $181.00 $178.70 $176.35 $174.40 $171.70
—    7/8  4 4  7/8  1         10  1/2  623319 31.0400 31.8260 174.00 160.05 155.35 153.05 150.75 148.75 146.05
—  .7660 4 4  7/8  1         10  1/2  623279 27.0770 27.8640 157.25 143.25 138.60 136.25 133.95 131.95 129.30
—  .6560 3 4  7/8     7/8  9  1/2  623239 23.0900 23.9010 131.25 117.30 112.55 110.30 107.95 106.00 103.30
—  .5470 2 4  3/8     7/8  8  1/4  623199 19.1270 19.9140 122.90 108.90 104.25 101.90 99.60 97.65 95.00
—  .4380 2 4  3/8     3/4  8  1/4  623159 15.1650 15.9510 119.20 105.20 100.50 98.20 95.90 93.90 91.25
—  .3280 1 4  1/8     3/4  7  1/2  623119 11.2020 11.9890 114.60 100.65 95.95 93.65 91.30 89.35 86.65
9.0  .3543  .2620 1 3  1/2     5/8  6  3/4  623090 93.55 8.8150 9.6010 114.60 100.65 95.95 93.65 91.30 89.35 86.65
10.0  .3937  .2840 1 3  5/8     5/8  7         623100 93.55 9.6020 10.3890 114.60 100.65 95.95 93.65 91.30 89.35 86.65
11.0  .4331  .3060 1 3  7/8     3/4  7  1/4  623110 93.55 10.3900 11.2010 114.60 100.65 95.95 93.65 91.30 89.35 86.65
12.0  .4724  .3500 2 4  3/8     3/4  8  1/4  623120 93.55 11.9900 12.7760 114.60 100.65 95.95 93.65 91.30 89.35 86.65
13.0  .5118  .3720 2 4  3/8     3/4  8  1/4  623130 93.80 12.7770 13.5640 114.90 100.90 96.20 93.90 91.60 89.60 86.95
14.0  .5512  .3940 2 4  3/8     3/4  8  1/4  623140 93.80 13.5650 14.3760 114.90 100.90 96.20 93.90 91.60 89.60 86.95
15.0  .5906  .4160 2 4  3/8     3/4  8  1/4  623150 98.10 14.3770 15.1640 119.20 105.20 100.50 98.20 95.90 93.90 91.25
16.0  .6299  .4590 2 4  3/8     3/4  8  1/4  623160 99.05 15.9520 16.7390 120.15 106.15 101.50 99.20 96.85 94.90 92.20
17.0  .6693  .4810 2 4  3/8     7/8  8  1/4  623170 99.90 16.7400 17.5510 120.95 107.00 102.30 100.00 97.65 95.70 93.00
18.0  .7087  .5030 2 4  3/8     7/8  8  1/4  623180 99.90 17.5520 18.3390 120.95 107.00 102.30 100.00 97.65 95.70 93.00
19.0  .7480  .5250 2 4  3/8     7/8  8  1/4  623190 99.90 18.3400 19.1260 120.95 107.00 102.30 100.00 97.65 95.70 93.00
20.0  .7874  .5690 3 4  7/8     7/8  9  1/2  623200 104.45 19.9150 20.7260 125.50 111.55 106.85 104.55 102.25 100.30 97.55
21.0  .8268  .5910 3 4  7/8     7/8  9  1/2  623210 109.55 20.7270 21.5140 130.65 116.65 111.95 109.65 107.35 105.35 102.70
22.0  .8661  .6120 3 4  7/8     7/8  9  1/2  623220 109.55 21.5150 22.3010 130.65 116.65 111.95 109.65 107.35 105.35 102.70
23.0  .9055  .6340 3 4  7/8     7/8  9  1/2  623230 110.20 22.3020 23.0890 131.25 117.30 112.55 110.30 107.95 106.00 103.30
24.0  .9449  .6780 3 4  7/8     7/8  9  1/2  623240 113.90 23.9020 24.6890 135.00 121.00 116.35 114.00 111.65 109.70 107.05
25.0  .9843  .7000 3 4  7/8     7/8  9  1/2  623250 115.90 24.6900 25.4760 136.95 123.00 118.30 116.00 113.70 111.70 109.00
26.0 1.0236  .7220 3 4  7/8     7/8  9  1/2  623260 116.70 25.4770 26.2640 137.80 123.80 119.10 116.80 114.50 112.50 109.85
27.0 1.0630  .7440 3 4  7/8     7/8  9  1/2  623270 118.20 26.2650 27.0760 139.30 125.30 120.65 118.30 115.95 114.00 111.35
28.0 1.1024  .7870 4 4  7/8  1         10  1/2  623280 141.95 27.8650 28.6510 163.05 149.05 144.35 142.10 139.70 137.80 135.10
29.0 1.1417  .8090 4 4  7/8  1         10  1/2  623290 147.85 28.6520 29.4390 168.90 154.95 150.25 148.00 145.65 143.70 141.00
30.0 1.1811  .8310 4 4  7/8  1         10  1/2  623300 151.90 29.4400 30.2390 173.00 159.00 154.35 152.00 149.65 147.70 145.05
31.0 1.2205  .8530 4 4  7/8  1         10  1/2  623310 152.45 30.2400 31.0390 173.45 159.55 154.80 152.55 150.20 148.25 145.55
32.0 1.2598  .8970 4 4  7/8  1         10  1/2  623320 163.20 31.8270 32.6140 184.30 170.30 165.55 163.30 160.95 159.00 156.30
33.0 1.2992  .9190 4 4  7/8  1         10  1/2  623330 167.50 32.6150 33.4010 188.55 174.60 169.85 167.60 165.25 163.30 160.60
34.0 1.3386  .9400 4 4  7/8  1         10  1/2  623340 170.85 33.4020 34.2140 191.90 177.95 173.25 171.00 168.65 166.70 164.00
35.0 1.3780  .9620 4 4  7/8  1         10  1/2  623350 174.75 34.2150 35.0010 195.85 181.85 177.20 174.85 172.50 170.55 167.90
36.0 1.4173 1.0060 4 4  7/8  1         10  1/2  623360 183.50 35.7900 36.6010 204.60 190.60 185.90 183.65 181.25 179.35 176.65
37.0 1.4567 1.0250 4 4  7/8  1         10  1/2  623370 188.70 36.6020 37.3890 209.70 195.80 191.05 188.80 186.45 184.50 181.80
38.0 1.4961 1.0500 4 4  7/8  1         10  1/2  623380 192.50 37.3900 38.1760 213.55 199.60 194.90 192.60 190.25 188.30 185.60
The specifications of the Core Drills listed above are only the dimensions that are critical to the application. Please choose the Drills that meet your specific needs.

Everyone at Hannibal would like to THANK YOU for the privilege of servicing your Core Drills needs.