Hannibal Carbide Tool Inc.

• PRODUCTS
• Spotlight
• Company Profile
• Advantages
• Request Info
• Tech Support
• Contact Us

• Reamers
  • h6 Shank Reamers
  • Coolant Fed
  • Extended Length
  • Extended Length - Coolant Fed
  • General Purpose
  • Material Specific
  • Pipe Tap
  • Semi-Finished
  • Shell Reamers & Arbors
  • Step
  • Solid Carbide
• Drills
  • Aircraft Extension
  • Cobalt
  • Coolant Fed
  • Core
  • Glass & Tile
  • Hard Steel Die
  • Jobbers Length
  • Masonry
  • Reduced Shank Diameter
  • Spotting/Centering (CNC)
  • Solid Carbide
  • Stub Length (CNC)
  • Taper Length
  • Taper Shank
• Counterbores
  • Aircraft
  • Capscrew
  • Pilots
  • Straight Shank
  • Taper Shank
  • Stub Length
• Milling Cutters
  • Arbor Hole Type
  • Shank Type
• End Mills
  • Center Cutting
  • High Spiral Shear Cutting
  • Slow Spiral
  • Straight Flutes
• Port Contour
  Cutters
  • ISO 6149-1 Metric Port w/o I.D. Groove
  • MS33649 Integral Reamer Pilot
  • S.A.E. - MS16142 - J514F - J1926
• Centers
  • Brown & Sharpe
  • Jarno
  • Morse
• Countersinks
  • Single Flute
  • Three Flute
• Single Points
  • Premium C2
  • Premium C5 - C6
  • S.A. Series Swiss Automatic Tool

Fractional | Metric

TOOL SELECTOR CHIP CLASS MATERIAL MACHINED TOOL TYPE  20   NON-FERROUS - LONG CHIPS   620 or 622   40   NON-FERROUS - SHORT CHIPS   620 or 622   60   CAST IRONS   620 or 622   80   LOW STRENGTH STEELS   621 or 623   100   MEDIUM STRENGTH STEELS   621 or 623   120   HIGH STRENGTH STEELS   621 or 623   140   HIGH TEMPERATURE ALLOYS   620 or 622
Type 623 Fractional - Taper Shank For Machining Steels Carbide Tipped Special carbide grade & tool geometry permit the heavy chip loads and speeds required for machining steel - taper shank Not to be used for machining non-ferrous materials, cast irons, or high temp alloys Four large right spiral polished flutes permit higher feeds and speeds Carbide tips brazed to hardened tool steel body 118º included chamfer angle Rigid design provides maximum support for the carbide tips Tool diameter tolerance: plus .000", minus .001"		Modifications: (Prompt delivery) Modified tool diameter - priced below Closer tool diameter tolerance End chamfer other than 118º included angle End cutting or corner radius Shank whistle notch for set screw Smaller taper shank Coatings available:  TITANIUM NITRIDE - TiN   TITANIUM CARBONITRIDE - TiCN   ZIRCONIUM NITRIDE - ZrN   AL TITANIUM NITRIDE - AITiN
Use: Designed for economically enlarging cored, punched, or drilled holes - can remove up to 30% of the tool diameter The balanced cutting action of the core drill removes considerably more material than a reamer, often eliminating the need for a final reaming or boring operation

Notes
  EDP No. 62312 - 62315: 3 Flutes

Below is a list of standard Core Drills offered by Hannibal Carbide Tool. If you do not see the Core Drills you are looking for you can click here for our SPECIAL TOOL QUOTE REQUEST FORM and fax (573-221-1140) or email your request to Hannibal. Within 24 hours we will let you know how we can supply your Core Drills. For technical assistance with your Drills please click here to fill out and submit our HANNIBAL TECHNICAL SUPPORT QUESTIONNAIRE.

Tool Diameter		Dimensions					Type 623 EDP NO.	Fractional Price	Finished To Modified Tool Diameter
		Min. Cut Diam.	Taper Shank No.	Length					Modified Diameter Range		Price Each - Based on Quantity Ordered
Frac.	Dec.			Flute	Carbide	Overall			Low	High	1	2	3	4	5-7	8-14*
3/8	.3750	.2620	1	3  1/2	5/8	6  3/4	62312	$125.50	.3471	.3780	$167.20	$146.25	$139.25	$135.95	$132.40	$129.60
13/32	.4063	.2840	1	3  5/8	5/8	7	62313	125.50	.3781	.4090	167.20	146.25	139.25	135.95	132.40	129.60
7/16	.4375	.3060	1	3  7/8	3/4	7  1/4	62314	125.50	.4091	.4410	167.20	146.25	139.25	135.95	132.40	129.60
15/32	.4688	.3280	1	4  1/8	3/4	7  1/2	62315	125.50	.4411	.4720	167.20	146.25	139.25	135.95	132.40	129.60
1/2	.5000	.3500	2	4  3/8	3/4	8  1/4	62316	125.50	.4721	.5030	167.20	146.25	139.25	135.95	132.40	129.60
17/32	.5313	.3720	2	4  3/8	3/4	8  1/4	62317	125.95	.5031	.5340	167.55	146.75	139.70	136.40	132.80	130.05
9/16	.5625	.3940	2	4  3/8	3/4	8  1/4	62318	125.95	.5341	.5660	167.55	146.75	139.70	136.40	132.80	130.05
19/32	.5938	.4160	2	4  3/8	3/4	8  1/4	62319	132.35	.5661	.5970	173.95	153.15	146.05	142.90	139.20	136.40
5/8	.6250	.4380	2	4  3/8	3/4	8  1/4	62320	132.35	.5971	.6280	173.95	153.15	146.05	142.90	139.20	136.40
21/32	.6563	.4590	2	4  3/8	3/4	8  1/4	62321	133.85	.6281	.6590	175.50	154.50	147.55	144.30	140.65	137.80
11/16	.6875	.4810	2	4  3/8	7/8	8  1/4	62322	135.00	.6591	.6910	176.65	155.70	148.75	145.40	141.90	139.00
23/32	.7188	.5030	2	4  3/8	7/8	8  1/4	62323	135.00	.6911	.7220	176.65	155.70	148.75	145.40	141.90	139.00
3/4	.7500	.5250	2	4  3/8	7/8	8  1/4	62324	135.00	.7221	.7530	176.65	155.70	148.75	145.40	141.90	139.00
25/32	.7813	.5470	2	4  3/8	7/8	8  1/4	62325	137.80	.7531	.7840	179.45	158.70	151.65	148.30	144.65	141.95
13/16	.8125	.5690	3	4  7/8	7/8	9  1/2	62326	141.80	.7841	.8160	183.45	162.60	155.55	152.35	148.70	145.85
27/32	.8438	.5910	3	4  7/8	7/8	9  1/2	62327	149.35	.8161	.8470	191.00	170.15	163.15	159.85	156.35	153.45
7/8	.8750	.6120	3	4  7/8	7/8	9  1/2	62328	149.35	.8471	.8780	191.00	170.15	163.15	159.85	156.35	153.45
29/32	.9063	.6340	3	4  7/8	7/8	9  1/2	62329	150.25	.8781	.9090	191.90	171.15	164.10	160.75	157.25	154.35
15/16	.9375	.6560	3	4  7/8	7/8	9  1/2	62330	150.25	.9091	.9410	191.90	171.15	164.10	160.75	157.25	154.35
31/32	.9688	.6780	3	4  7/8	7/8	9  1/2	62331	155.75	.9411	.9720	197.40	176.65	169.55	166.20	162.80	159.95
1	1.0000	.7000	3	4  7/8	7/8	9  1/2	62332	158.80	.9721	1.0030	200.45	179.65	172.60	169.30	165.80	162.90
1  1/32	1.0313	.7220	3	4  7/8	7/8	9  1/2	62333	160.00	1.0031	1.0340	201.70	180.75	173.75	170.55	166.90	164.10
1  1/16	1.0625	.7440	3	4  7/8	7/8	9  1/2	62334	162.20	1.0341	1.0660	203.90	183.00	176.00	172.65	169.20	166.20
1  3/32	1.0938	.7660	4	4  7/8	1	10  1/2	62335	189.05	1.0661	1.0970	230.60	209.80	202.75	199.55	195.90	193.05
1  1/8	1.1250	.7870	4	4  7/8	1	10  1/2	62336	197.50	1.0971	1.1280	239.25	218.45	211.40	208.00	204.50	201.70
1  5/32	1.1563	.8090	4	4  7/8	1	10  1/2	62337	206.45	1.1281	1.1590	248.15	227.20	220.20	216.85	213.25	210.55
1  3/16	1.1875	.8310	4	4  7/8	1	10  1/2	62338	212.35	1.1591	1.1905	254.00	233.25	226.20	222.85	219.35	216.55
1  7/32	1.2188	.8530	4	4  7/8	1	10  1/2	62339	213.15	1.1906	1.2220	254.85	234.00	227.00	223.60	220.15	217.30
1  1/4	1.2500	7/8	4	4  7/8	1	10  1/2	62340	214.00	1.2221	1.2530	255.65	234.70	227.75	224.50	220.90	218.05
1  9/32	1.2813	.8970	4	4  7/8	1	10  1/2	62341	229.20	1.2531	1.2840	270.85	250.05	242.95	239.65	236.15	233.30
1  5/16	1.3125	.9190	4	4  7/8	1	10  1/2	62342	235.55	1.2841	1.3150	277.25	256.40	249.45	246.10	242.55	239.65
1 11/32	1.3438	.9400	4	4  7/8	1	10  1/2	62343	240.60	1.3151	1.3470	282.35	261.45	254.50	251.20	247.50	244.80
1  3/8	1.3750	.9620	4	4  7/8	1	10  1/2	62344	246.40	1.3471	1.3780	288.10	267.25	260.25	256.95	253.35	250.45
1 13/32	1.4063	63/64	4	4  7/8	1	10  1/2	62345	252.25	1.3781	1.4090	293.80	272.95	265.95	262.65	259.10	256.25
1  7/16	1.4375	1.0060	4	4  7/8	1	10  1/2	62346	259.50	1.4091	1.4410	301.20	280.20	273.25	269.95	266.45	263.50
1 15/32	1.4688	1.0250	4	4  7/8	1	10  1/2	62347	267.20	1.4411	1.4720	308.90	288.00	280.95	277.65	274.00	271.25
1  1/2	1.5000	1.0500	4	4  7/8	1	10  1/2	62348	272.80	1.4721	1.5030	314.50	293.65	286.70	283.35	279.90	277.00

* Quantities of 15 or more - price of fractional size in same size range

The specifications of the Core Drills listed above are only the dimensions that are critical to the application. Please choose the Drills that meet your specific needs.

Everyone at Hannibal would like to THANK YOU for the privilege of servicing your Core Drills needs.

Hannibal Carbide Tool, Inc.

Industrial Supply Association

Value Added Partner