| Fractional

Below is a list of standard Arbor Hole Type Cutters offered by Hannibal Carbide Tool. If you do not see the Arbor Hole Type Cutters you are looking for you can click here for our SPECIAL TOOL QUOTE REQUEST FORM and fax (573-221-1140) or email your request to Hannibal. Within 24 hours we will let you know how we can supply your Arbor Hole Type Cutters. For technical assistance with your Cutters please click here to fill out and submit our HANNIBAL TECHNICAL SUPPORT QUESTIONNAIRE.

Type 559

Modified width between .0704" and .5312"
Width Grind Cutter Notes (All cutters on page)
  • 18 Teeth
  • C-2(m) Carbide
  • 5° Positive Radial Rake
  • Width Tolerance: +.001"/-.00"
  • OD tolerance: +.0313"/-.000"
  • 1" Arbor hold +.001"/-.000"
  • ANSI Standard keyway dimensions
  • Add 5% to grind down hub width
  • Add 5% to match OD's on cutter sets within .001"
  • Not designed to be used on heat treated materials greater than 363 Brinell (39Rc)
TOOL
DIAM 		HUB
WIDTH 		EDP NO. FINISHED TO MODIFIED FACE WIDTH
MODIFIED
FACE WIDTH
RANGE 		PRICE EACH - BASED ON QUANTITY ORDERED
1 2 3 4 5 6
6  .0681 55966D 0.0704 – 0.0859 $453.90 $430.25 $425.95 $423.75 $422.40 $391.30
6  .0838 55968D 0.0860 – 0.1015 422.90 399.30 395.00 392.80 391.45 360.35
6  .0994 55970D 0.1016 – 0.1171 455.20 431.60 427.30 425.05 423.75 392.60
6  .1150 55972D 0.1094 – 0.1406 433.20 409.60 405.30 403.05 401.75 370.65
6  .1562 55974D 0.1407 – 0.1718 449.40 425.80 421.50 419.30 417.95 386.85
6  .1875 55976D 0.1719 – 0.2031 465.60 441.95 437.75 435.45 434.10 403.00
6  .2188 55978D 0.2032 – 0.2343 481.80 458.20 453.90 451.65 450.35 419.25
6  .2500 55980D 0.2188 – 0.2812 504.20 480.55 476.25 474.05 472.70 441.60
6  .3125 55982D 0.2813 – 0.3437 523.95 500.30 496.05 493.80 492.50 461.35
6  .3750 55984D 0.3438 – 0.4062 541.65 518.00 513.80 511.50 510.20 479.05
6  .4375 55992D 0.4063 – 0.4687 564.50 540.85 536.55 534.35 533.00 501.90
6  .5000 55990D 0.4688 – 0.5312 587.30 563.70 559.40 557.20 555.85 524.75

Corner Radius or Chamfer on ONE Side

TOOL
DIAM 		HUB
WIDTH 		EDP NO. ONE RADIUS OR CHAMFER FINISHED TO MODIFIED FACE WIDTH
MODIFIED
FACE WIDTH
RANGE 		PRICE EACH - BASED ON QUANTITY ORDERED
1 2 3 4 5 6
6  .0681 55966R1 0.0704 – 0.0859 $468.40 $434.40 $429.60 $427.20 $425.70 $424.90
6  .0838 55968R1 0.0860 – 0.1015 437.45 403.45 398.65 396.25 394.75 393.95
6  .0994 55970R1 0.1016 – 0.1171 469.75 435.70 430.95 428.50 427.00 426.25
6  .1150 55972R1 0.1094 – 0.1406 447.75 413.70 408.95 406.50 405.05 404.25
6  .1562 55974R1 0.1407 – 0.1718 463.95 429.95 425.15 422.75 421.25 420.45
6  .1875 55976R1 0.1719 – 0.2031 480.15 446.15 441.40 438.90 437.45 436.65
6  .2188 55978R1 0.2032 – 0.2343 496.35 462.35 457.60 455.10 453.65 452.85
6  .2500 55980R1 0.2188 – 0.2812 518.70 484.75 479.95 477.50 476.00 475.20
6  .3125 55982R1 0.2813 – 0.3437 538.50 504.50 499.75 497.25 495.75 494.95
6  .3750 55984R1 0.3438 – 0.4062 556.20 522.20 517.45 514.95 513.50 512.70
6  .4375 55992R1 0.4063 – 0.4687 579.00 545.05 540.30 537.80 536.30 535.50
6  .5000 55990R1 0.4688 – 0.5312 601.85 567.85 563.05 560.65 559.15 558.35
Specify right or left side for radius or chamfer 		Radius Notes
  • Maximum radius on one side is .2656"
  • Full radius and maximum radius on both sides is 1/2 the width of the cutter
  • A non-tangent radii must be quoted
Chamfer Notes
  • Chamfer Angles can range from 0° to 45°
  • Chamfer is measured off the OD
  • Maximum chamfer is the LESSER of 1/3 the width of the cutter OR .2656" length of angle when measured across the OD
  • Chamfer Angle Tolerance: +/- 1/2°
  • Chamfers greater than 45°
Corner Radius or Chamfer on One Side

Corner Radius or Chamfer on BOTH Sides OR a Full Radius

Corner Radius or Chamfer on Both Sides.jpg
  • Price Increases 5% for Alternating Chamfers
TOOL
DIAM 		HUB
WIDTH 		EDP NO. RADII, CHAMFERS, OR COMBO FINISHED TO MODIFIED FACE WIDTH
MODIFIED
FACE WIDTH
RANGE 		PRICE EACH - BASED ON QUANTITY ORDERED
1 2 3 4 5 6
6  .0681 55966R2 0.0704 – 0.0859 $483.25 $442.70 $437.05 $434.10 $432.30 $431.35
6  .0838 55968R2 0.0860 – 0.1015 452.30 411.75 406.05 403.10 401.35 400.40
6  .0994 55970R2 0.1016 – 0.1171 484.60 444.05 438.35 435.45 433.65 432.70
6  .1150 55972R2 0.1094 – 0.1406 462.60 422.05 416.35 413.45 411.65 410.70
6  .1562 55974R2 0.1407 – 0.1718 478.80 438.25 432.55 429.60 427.85 426.90
6  .1875 55976R2 0.1719 – 0.2031 494.95 454.40 448.75 445.85 444.10 443.15
6  .2188 55978R2 0.2032 – 0.2343 511.20 470.65 464.95 462.05 460.25 459.30
6  .2500 55980R2 0.2188 – 0.2812 533.55 493.00 487.35 484.40 482.60 481.70
6  .3125 55982R2 0.2813 – 0.3437 553.30 512.75 507.10 504.20 502.40 501.45
6  .3750 55984R2 0.3438 – 0.4062 571.00 530.50 524.80 521.90 520.15 519.20
6  .4375 55992R2 0.4063 – 0.4687 593.85 553.30 547.65 544.75 542.95 542.00
6  .5000 55990R2 0.4688 – 0.5312 616.70 576.15 570.50 567.60 565.75 564.80
The specifications of the Arbor Hole Type Cutters listed above are only the dimensions that are critical to the application. Please choose the Cutters that meet your specific needs.

Everyone at Hannibal would like to THANK YOU for the privilege of servicing your Arbor Hole Type Cutters needs.