| Fractional

Below is a list of standard Arbor Hole Type Cutters offered by Hannibal Carbide Tool. If you do not see the Arbor Hole Type Cutters you are looking for you can click here for our SPECIAL TOOL QUOTE REQUEST FORM and fax (573-221-1140) or email your request to Hannibal. Within 24 hours we will let you know how we can supply your Arbor Hole Type Cutters. For technical assistance with your Cutters please click here to fill out and submit our HANNIBAL TECHNICAL SUPPORT QUESTIONNAIRE.

Type 559

Modified width between .0600" and .5312"
Width Grind Cutter Notes (All cutters on page)
  • 14 Teeth
  • C-2(m) Carbide
  • 5° Positive Radial Rake
  • Width Tolerance: +.001"/-.00"
  • OD tolerance: +.0313"/-.000"
  • 1" Arbor hold +.001"/-.000"
  • ANSI Standard keyway dimensions
  • Add 5% to grind down hub width
  • Add 5% to match OD's on cutter sets within .001"
  • Not designed to be used on heat treated materials greater than 363 Brinell (39Rc)
TOOL
DIAM 		HUB
WIDTH 		EDP NO. FINISHED TO MODIFIED FACE WIDTH
MODIFIED
FACE WIDTH
RANGE 		PRICE EACH - BASED ON QUANTITY ORDERED
1 2 3 4 5 6
4  .0545 55916D 0.0600 – 0.0703 $305.05 $282.95 $278.95 $276.85 $275.60 $246.50
4  .0701 55918D 0.0704 – 0.0859 341.00 318.85 314.80 312.75 311.50 282.40
4  .0858 55920D 0.0860 – 0.1015 305.05 282.95 278.95 276.85 275.60 246.50
4  .1014 55922D 0.1016 – 0.1171 350.85 328.75 324.70 322.65 321.40 292.25
4  .1170 55924D 0.1172 – 0.1406 304.70 282.55 278.50 276.45 275.20 246.10
4  .1562 55926D 0.1407 – 0.1718 311.15 289.05 285.00 282.95 281.65 252.55
4  .1875 55928D 0.1719 – 0.2031 319.20 297.10 293.05 291.00 289.70 260.60
4  .2188 55930D 0.2032 – 0.2343 327.40 305.30 301.25 299.20 297.90 268.75
4  .2500 55932D 0.2344 – 0.2812 333.85 311.70 307.65 305.60 304.35 275.25
4  .3125 55934D 0.2813 – 0.3437 353.20 331.10 327.05 325.00 323.70 294.65
4  .3750 55936D 0.3438 – 0.4062 375.90 353.80 349.75 347.70 346.40 317.25
4  .4375 55938D 0.4063 – 0.4687 398.70 376.60 372.55 370.50 369.20 340.10
4  .5000 55940D 0.4688 – 0.5312 421.55 399.40 395.40 393.30 392.05 362.95

Corner Radius or Chamfer on ONE Side

TOOL
DIAM 		HUB
WIDTH 		EDP NO. ONE RADIUS OR CHAMFER FINISHED TO MODIFIED FACE WIDTH
MODIFIED
FACE WIDTH
RANGE 		PRICE EACH - BASED ON QUANTITY ORDERED
1 2 3 4 5 6
4  .0545 55916R1 0.0600 – 0.0703 $319.15 $287.10 $282.65 $280.30 $278.95 $278.20
4  .0701 55918R1 0.0704 – 0.0859 355.05 323.00 318.55 316.20 314.80 314.10
4  .0858 55920R1 0.0860 – 0.1015 319.15 287.10 282.65 280.30 278.95 278.20
4  .1014 55922R1 0.1016 – 0.1171 364.95 332.90 328.40 326.10 324.70 323.95
4  .1170 55924R1 0.1172 – 0.1406 318.75 286.70 282.25 279.90 278.50 277.75
4  .1562 55926R1 0.1407 – 0.1718 325.20 293.15 288.70 286.40 285.00 284.25
4  .1875 55928R1 0.1719 – 0.2031 333.30 301.25 296.75 294.45 293.05 292.30
4  .2188 55930R1 0.2032 – 0.2343 341.50 309.40 304.95 302.65 301.25 300.45
4  .2500 55932R1 0.2344 – 0.2812 347.90 315.85 311.40 309.05 307.65 306.90
4  .3125 55934R1 0.2813 – 0.3437 367.30 335.25 330.75 328.45 327.05 326.25
4  .3750 55936R1 0.3438 – 0.4062 389.95 357.90 353.45 351.15 349.75 348.95
4  .4375 55938R1 0.4063 – 0.4687 412.80 380.75 376.25 373.95 372.55 371.80
4  .5000 55940R1 0.4688 – 0.5312 435.60 403.55 399.10 396.75 395.40 394.65
Specify right or left side for radius or chamfer 		Radius Notes
  • Maximum radius on one side is .2656"
  • Full radius and maximum radius on both sides is 1/2 the width of the cutter
  • A non-tangent radii must be quoted
Chamfer Notes
  • Chamfer Angles can range from 0° to 45°
  • Chamfer is measured off the OD
  • Maximum chamfer is the LESSER of 1/3 the width of the cutter OR .2656" length of angle when measured across the OD
  • Chamfer Angle Tolerance: +/- 1/2°
  • Chamfers greater than 45°
Corner Radius or Chamfer on One Side

Corner Radius or Chamfer on BOTH Sides OR a Full Radius

Corner Radius or Chamfer on Both Sides.jpg
  • Price Increases 5% for Alternating Chamfers
TOOL
DIAM 		HUB
WIDTH 		EDP NO. RADII, CHAMFERS, OR COMBO FINISHED TO MODIFIED FACE WIDTH
MODIFIED
FACE WIDTH
RANGE 		PRICE EACH - BASED ON QUANTITY ORDERED
1 2 3 4 5 6
4  .0545 55916R2 0.0600 – 0.0703 $326.60 $291.30 $286.30 $283.75 $282.25 $281.40
4  .0701 55918R2 0.0704 – 0.0859 362.45 327.15 322.20 319.65 318.10 317.25
4  .0858 55920R2 0.0860 – 0.1015 326.60 291.30 286.30 283.75 282.25 281.40
4  .1014 55922R2 0.1016 – 0.1171 372.40 337.05 332.10 329.55 328.00 327.15
4  .1170 55924R2 0.1172 – 0.1406 326.15 290.85 285.90 283.35 281.80 280.95
4  .1562 55926R2 0.1407 – 0.1718 332.65 297.35 292.35 289.85 288.25 287.45
4  .1875 55928R2 0.1719 – 0.2031 340.75 305.40 300.45 297.90 296.30 295.55
4  .2188 55930R2 0.2032 – 0.2343 348.90 313.55 308.60 306.05 304.55 303.70
4  .2500 55932R2 0.2344 – 0.2812 355.30 320.00 315.05 312.50 310.95 310.10
4  .3125 55934R2 0.2813 – 0.3437 374.70 339.40 334.45 331.90 330.35 329.50
4  .3750 55936R2 0.3438 – 0.4062 397.40 362.05 357.10 354.55 353.05 352.20
4  .4375 55938R2 0.4063 – 0.4687 420.25 384.90 379.95 377.40 375.80 375.05
4  .5000 55940R2 0.4688 – 0.5312 443.05 407.75 402.75 400.20 398.65 397.80
The specifications of the Arbor Hole Type Cutters listed above are only the dimensions that are critical to the application. Please choose the Cutters that meet your specific needs.

Everyone at Hannibal would like to THANK YOU for the privilege of servicing your Arbor Hole Type Cutters needs.