Fractional


TOOL SELECTOR
CHIP
CLASS		MATERIAL MACHINEDTOOL TYPE
 20  NON-FERROUS - LONG CHIPS  540 
 40  NON-FERROUS - SHORT CHIPS  540 / 541 
 60  CAST IRONS  541 
 80  LOW STRENGTH STEELS  542 
 100  MEDIUM STRENGTH STEELS  542 
 120  HIGH STRENGTH STEELS  542 
 140  HIGH TEMPERATURE ALLOYS  543

Type 543 Fractional - For High Temp Alloys
Carbide Tipped
  • Large number of teeth permits high metal removal at moderate feeds and speeds
  • For slotting, straddle milling, and face milling
  • Tool diameter tolerance: plus 1/16", minus .000"
  • Face width tolerance: plus .001", minus .000"
  • Arbor hole tolerance: plus .001", minus .000"
  • Tool geometry & carbide grade appropriate for material being machined
 		  Modifications: (Prompt delivery)
  • Alternate chamfer every other tooth
  • Corner chamfer or corner radius on both sides
  • Full radius
  • Reduced face width
  • Closer tool diameter tolerance
  • Chip breakers
  • Matched tool diameter set(s)
  • Reduced hub width
  • Additional keyway
  • Coatings available:
    •  TITANIUM NITRIDE - TiN 
     TITANIUM CARBONITRIDE - TiCN 
     ZIRCONIUM NITRIDE - ZrN 
     AL TITANIUM NITRIDE - AITiN 
Below is a list of standard Arbor Hole Type Cutters offered by Hannibal Carbide Tool. If you do not see the Arbor Hole Type Cutters you are looking for you can click here for our SPECIAL TOOL QUOTE REQUEST FORM and fax (573-221-1140) or email your request to Hannibal. Within 24 hours we will let you know how we can supply your Arbor Hole Type Cutters. For technical assistance with your Cutters please click here to fill out and submit our HANNIBAL TECHNICAL SUPPORT QUESTIONNAIRE.
Tool Diameter Face Width Dimensions Type 543
EDP NO.		 Fractional
Price
Frac. Dec. Arbor Hole No. of Teeth
3            1/4   .2500 1         8 54330 $153.10
3            5/16  .3125 1         8 54331 160.45
3            3/8   .3750 1         8 54332 162.60
3            1/2   .5000 1         8 54334 181.75
4            1/4   .2500 1         10 54340 191.45
4            5/16  .3125 1         10 54341 201.10
4            3/8   .3750 1         10 54342 205.60
4            3/8   .3750 1  1/4  10 54343 205.60
4            7/16  .4375 1         10 54374 223.25
4            1/2   .5000 1         10 54344 224.95
4            1/2   .5000 1  1/4  10 54345 224.95
4            5/8   .6250 1         10 54346 236.90
4            5/8   .6250 1  1/4  10 54347 236.90
4            3/4   .7500 1         10 54348 244.00
4            3/4   .7500 1  1/4  10 54349 244.00
5            1/2   .5000 1         12 54354 258.40
5            1/2   .5000 1  1/4  12 54355 258.40
5            5/8   .6250 1  1/4  12 54357 282.25
5            3/4   .7500 1         12 54358 316.50
5            3/4   .7500 1  1/4  12 54359 316.50
6            1/2   .5000 1         14 54364 332.45
6            1/2   .5000 1  1/4  14 54365 332.45
6            5/8   .6250 1  1/4  14 54367 335.10
6            3/4   .7500 1         14 54368 361.60
6            3/4   .7500 1  1/4  14 54369 361.60
8            3/4   .7500 1  1/4  14 54388 387.70
The specifications of the Arbor Hole Type Cutters listed above are only the dimensions that are critical to the application. Please choose the Cutters that meet your specific needs.

Everyone at Hannibal would like to THANK YOU for the privilege of servicing your Arbor Hole Type Cutters needs.