Fractional


TOOL SELECTOR
CHIP
CLASS		MATERIAL MACHINEDTOOL TYPE
 20  NON-FERROUS - LONG CHIPS  540 
 40  NON-FERROUS - SHORT CHIPS  540 / 541 
 60  CAST IRONS  541 
 80  LOW STRENGTH STEELS  542 
 100  MEDIUM STRENGTH STEELS  542 
 120  HIGH STRENGTH STEELS  542 
 140  HIGH TEMPERATURE ALLOYS  543

Type 541 Fractional - For Cast Irons
Carbide Tipped
  • Large flute capacity but more teeth permits high metal removal at moderate feeds and speeds
  • For slotting, straddle milling, and face milling
  • Tool diameter tolerance: plus 1/16", minus .000"
  • Face width tolerance: plus .001", minus .000"
  • Arbor hole tolerance: plus .001", minus .000"
  • Tool geometry & carbide grade appropriate for material being machined
 		  Modifications: (Prompt delivery)
  • Alternate chamfer every other tooth
  • Corner chamfer or corner radius on both sides
  • Full radius
  • Reduced face width
  • Closer tool diameter tolerance
  • Chip breakers
  • Matched tool diameter set(s)
  • Reduced hub width
  • Additional keyway
  • Coatings available:
    •  TITANIUM NITRIDE - TiN 
     TITANIUM CARBONITRIDE - TiCN 
     ZIRCONIUM NITRIDE - ZrN 
     AL TITANIUM NITRIDE - AITiN 
Below is a list of standard Arbor Hole Type Cutters offered by Hannibal Carbide Tool. If you do not see the Arbor Hole Type Cutters you are looking for you can click here for our SPECIAL TOOL QUOTE REQUEST FORM and fax (573-221-1140) or email your request to Hannibal. Within 24 hours we will let you know how we can supply your Arbor Hole Type Cutters. For technical assistance with your Cutters please click here to fill out and submit our HANNIBAL TECHNICAL SUPPORT QUESTIONNAIRE.
Tool Diameter Face Width Dimensions Type 541
EDP NO.		 Fractional
Price
Frac. Dec. Arbor Hole No. of Teeth
3            1/4   .2500 1         6 54130 $121.95
3            5/16  .3125 1         6 54131 122.50
3            3/8   .3750 1         6 54132 124.95
3            7/16  .4375 1         6 54133 135.15
3            1/2   .5000 1         6 54134 140.70
4            1/4   .2500 1         8 54140 157.55
4            5/16  .3125 1         8 54141 162.85
4            3/8   .3750 1         8 54142 171.15
4            3/8   .3750 1  1/4  8 54143 171.15
4            7/16  .4375 1         8 54174 174.60
4            1/2   .5000 1         8 54144 180.35
4            1/2   .5000 1  1/4  8 54145 180.35
4            9/16  .5625 1         8 54194 185.35
4            5/8   .6250 1         8 54146 200.90
4            5/8   .6250 1  1/4  8 54147 200.90
4            3/4   .7500 1         8 54148 200.90
4            3/4   .7500 1  1/4  8 54149 200.90
5            1/4   .2500 1         10 54150 208.65
5            5/16  .3125 1         10 54151 208.65
5            3/8   .3750 1  1/4  10 54153 213.75
5            7/16  .4375 1  1/4  10 54175 214.75
5            1/2   .5000 1         10 54154 228.00
5            1/2   .5000 1  1/4  10 54155 228.00
5            9/16  .5625 1  1/4  10 54195 231.90
5            5/8   .6250 1  1/4  10 54157 246.80
5            3/4   .7500 1         10 54158 279.50
5            3/4   .7500 1  1/4  10 54159 279.50
5         1         1.0000 1  1/4  10 54115 304.10
6            3/8   .3750 1  1/4  12 54163 262.55
6            1/2   .5000 1         12 54164 278.85
6            1/2   .5000 1  1/4  12 54165 278.85
6            5/8   .6250 1  1/4  12 54167 304.70
6            3/4   .7500 1         12 54168 341.85
6            3/4   .7500 1  1/4  12 54169 341.85
6         1         1.0000 1  1/4  12 54116 345.50
8            3/4   .7500 1  1/4  12 54188 358.80
8            3/4   .7500 1  1/2  12 54189 358.80
8         1         1.0000 1  1/4  12 54180 373.95
8         1         1.0000 1  1/2  12 54181 373.95
The specifications of the Arbor Hole Type Cutters listed above are only the dimensions that are critical to the application. Please choose the Cutters that meet your specific needs.

Everyone at Hannibal would like to THANK YOU for the privilege of servicing your Arbor Hole Type Cutters needs.