Fractional | Metric


TOOL SELECTOR
CHIP
CLASS		MATERIAL MACHINEDTOOL TYPE
 20  NON-FERROUS - LONG CHIPS  512 or 514 
 40  NON-FERROUS - SHORT CHIPS  512 or 514 
 60  CAST IRONS  512 or 514 
 80  LOW STRENGTH STEELS  510 
 100  MEDIUM STRENGTH STEELS  510 
 120  HIGH STRENGTH STEELS  510 
 140  HIGH TEMPERATURE ALLOYS  512 or 514

Type 514 Metric - Three / Four Flutes - Straight Shank
Carbide Tipped
  • Right spiral flutes
  • Carbide tips brazed to tough hardened alloy steel body
  • Tool diameter tolerance: plus .001", minus .000"
  • Shank diameter tolerance: plus .0000", minus .0005"
  • Geometry and carbide grade appropriate for material being machined
  • Precision ground cutting edges
  • USCTI
  • Steel cutting counterbores have secondary end relief on carbide for increased cutting edge strength
 		  Modifications: (Prompt delivery)
  • Modified tool diameter - priced below
  • Cutting diameter reduced for step
  • Corner chamfer or corner radius
  • Shortened shank or reduced shank diameter
  • Flat(s) or tang on shank
  • Coatings available:
    •  TITANIUM NITRIDE - TiN 
     TITANIUM CARBONITRIDE - TiCN 
     ZIRCONIUM NITRIDE - ZrN 
     AL TITANIUM NITRIDE - AITiN 

Notes
  Tool diameter in millimeters (mm); all other dimensions in inches
  Modified tool diameters are available up to 50mm - contact us for price
Below is a list of standard Straight Shank Counterbores offered by Hannibal Carbide Tool. If you do not see the Straight Shank Counterbores you are looking for you can click here for our SPECIAL TOOL QUOTE REQUEST FORM and fax (573-221-1140) or email your request to Hannibal. Within 24 hours we will let you know how we can supply your Straight Shank Counterbores. For technical assistance with your Counterbores please click here to fill out and submit our HANNIBAL TECHNICAL SUPPORT QUESTIONNAIRE.
Tool Diameter Dimensions Type 514
EDP NO.		 Metric
Price		 Finished To Modified Tool Diameter
Diameter No. of Flutes Overall Length Modified Diameter Range (mm) Price Each - Based on Quantity Ordered
mm Inch Min. Cut Pilot Hole Shank Low High 1 2 3 4 5-7 8-14 Over 14
6.0  .2362  .1140  .0938   15/64 3 3 13/16 514060 $65.50 6.0000 6.4260 $88.70 $73.20 $68.00 $65.50 $62.90 $60.80 $57.70
6.5  .2559  .1140  .0938   17/64 3 3 13/16 514065 77.75 6.4270 7.2140 101.00 85.45 80.30 77.75 75.15 73.05 69.95
7.0  .2756  .1140  .0938   17/64 3 3 13/16 514070 77.75 — — — — — — — — —
7.5  .2953  .1140  .0938   19/64 3 3 13/16 514075 71.60 7.2150 8.0010 94.80 79.30 74.10 71.60 69.00 66.90 63.80
8.0  .3150  .1140  .0938   19/64 3 3 13/16 514080 71.60 — — — — — — — — —
8.5  .3346  .1140  .0938    5/16 3 3 13/16 514085 87.80 8.0020 8.8140 111.05 95.50 90.30 87.80 85.20 83.05 80.05
9.0  .3543  .1820  .1563    5/16 3 4  1/16 514090 74.50 8.8150 9.6010 95.90 81.55 76.80 74.50 72.10 70.10 67.30
9.5  .3740  .1820  .1563    5/16 3 4  1/16 514095 74.50 — — — — — — — — —
10.0  .3937  .1820  .1563    3/8  3 4  1/16 514100 82.80 9.6020 10.3890 104.20 89.90 85.10 82.80 80.40 78.45 75.65
10.5  .4134  .1820  .1563    3/8  3 4  1/16 514105 76.15 10.3900 11.2010 97.55 83.25 78.50 76.15 73.80 71.80 69.00
11.0  .4331  .1820  .1563    3/8  3 4  1/16 514110 76.15 — — — — — — — — —
11.5  .4528  .2280  .1875    7/16 3 4  5/16 514115 90.90 11.2020 11.9890 112.30 98.00 93.25 90.90 88.50 86.50 83.70
12.0  .4724  .2280  .1875    7/16 3 4  5/16 514120 83.50 11.9900 12.7760 104.90 90.60 85.80 83.50 81.10 79.10 76.25
12.5  .4921  .2280  .1875    7/16 3 4  5/16 514125 83.50 — — — — — — — — —
13.0  .5118  .2280  .1875    1/2  3 4  5/16 514130 93.30 12.7770 13.5640 114.65 100.35 95.55 93.30 90.85 88.90 86.05
13.5  .5315  .2280  .1875    1/2  3 4  5/16 514135 93.30 — — — — — — — — —
14.0  .5512  .2280  .1875    1/2  3 4  5/16 514140 85.65 13.5650 14.3760 107.05 92.75 88.00 85.65 83.25 81.30 78.50
14.5  .5709  .2280  .1875    1/2  3 5  1/8  514145 94.15 14.3770 15.1640 115.50 101.20 96.40 94.15 91.70 89.75 86.90
15.0  .5906  .2280  .1875    1/2  3 5  1/8  514150 94.15 — — — — — — — — —
15.5  .6102  .2280  .1875    1/2  3 5  1/8  514155 86.40 15.1650 15.9510 107.80 93.50 88.70 86.40 84.00 82.05 79.25
16.0  .6299  .2280  .1875    1/2  3 5  1/8  514160 99.05 15.9520 16.7390 120.45 106.10 101.35 99.05 96.60 94.65 91.85
16.5  .6496  .2280  .1875    1/2  3 5  1/8  514165 99.05 — — — — — — — — —
17.0  .6693  .2280  .1875    1/2  3 5  1/8  514170 90.95 16.7400 17.5510 112.35 98.05 93.30 90.95 88.55 86.55 83.75
17.5  .6890  .2280  .1875    1/2  3 5  1/8  514175 90.95 — — — — — — — — —
18.0  .7087  .2900  .2500    1/2  3 5  3/8  514180 101.20 17.5520 18.3390 122.60 108.30 103.50 101.20 98.75 96.80 93.95
18.5  .7283  .2900  .2500    1/2  3 5  3/8  514185 92.80 18.3400 19.1260 114.20 99.90 95.15 92.80 90.40 88.40 85.60
19.0  .7480  .2900  .2500    1/2  3 5  3/8  514190 92.80 — — — — — — — — —
19.5  .7677  .2900  .2500    5/8  3 5  3/8  514195 103.10 19.1270 19.9140 124.50 110.20 105.40 103.10 100.70 98.70 95.90
20.0  .7874  .2900  .2500    5/8  3 5  3/8  514200 94.55 19.9150 20.7260 115.95 101.65 96.85 94.55 92.10 90.15 87.35
20.5  .8071  .2900  .2500    5/8  3 5  3/8  514205 94.55 — — — — — — — — —
21.0  .8268  .2900  .2500    3/4  3 5  3/8  514210 108.65 20.7270 21.5140 130.05 115.75 111.00 108.65 106.20 104.25 101.45
21.5  .8465  .2900  .2500    3/4  3 5  3/8  514215 108.65 — — — — — — — — —
22.0  .8661  .2900  .2500    3/4  3 5  3/8  514220 99.65 21.5150 22.3010 121.05 106.75 101.95 99.65 97.25 95.30 92.50
22.5  .8858  .2900  .2500    3/4  3 6  1/8  514225 110.65 22.3020 23.0890 132.10 117.75 113.00 110.65 108.30 106.30 103.50
23.0  .9055  .2900  .2500    3/4  3 6  1/8  514230 110.65 — — — — — — — — —
23.5  .9252  .2900  .2500    3/4  3 6  1/8  514235 101.50 23.0900 23.9010 122.90 108.60 103.85 101.50 99.10 97.15 94.35
24.0  .9449  .3530  .3125    3/4  3 6  3/8  514240 113.60 23.9020 24.6890 135.00 120.70 115.90 113.60 111.20 109.25 106.40
24.5  .9646  .3530  .3125    3/4  3 6  3/8  514245 113.60 — — — — — — — — —
25.0  .9843  .3530  .3125    3/4  3 6  3/8  514250 104.15 24.6900 25.4760 125.55 111.25 106.50 104.15 101.75 99.80 97.00
25.5 1.0039  .3530  .3125    3/4  3 6  3/8  514255 105.15 25.4770 27.0760 126.55 112.25 107.50 105.15 102.75 100.80 98.00
26.0 1.0236  .3530  .3125    3/4  3 6  3/8  514260 105.15 — — — — — — — — —
27.0 1.0630  .3530  .3125    3/4  3 6  3/8  514270 105.15 — — — — — — — — —
28.0 1.1024  .3530  .3125 1         3 6  3/8  514280 107.60 27.0770 28.6510 129.00 114.65 109.85 107.60 105.15 103.20 100.40
29.0 1.1417  .3530  .3125 1         3 6  3/8  514290 112.00 28.6520 30.2390 133.35 119.05 114.25 112.00 109.55 107.60 104.80
30.0 1.1811  .3530  .3125 1         3 6  3/8  514300 112.00 — — — — — — — — —
31.0 1.2205  .4260  .3750 1         4 6  5/8  514310 124.40 30.2400 31.8260 147.60 132.10 126.90 124.40 121.80 119.60 116.60
32.0 1.2598  .4260  .3750 1         4 6  5/8  514320 133.45 31.8270 33.4140 156.70 141.15 136.00 133.45 130.85 128.75 125.65
33.0 1.2992  .4260  .3750 1         4 6  5/8  514330 133.45 — — — — — — — — —
34.0 1.3386  .4260  .3750 1         4 6  5/8  514340 139.80 33.4150 35.0010 163.05 147.50 142.30 139.80 137.20 135.05 132.00
35.0 1.3780  .4260  .3750 1         4 6  5/8  514350 139.80 — — — — — — — — —
36.0 1.4173  .4260  .3750 1  1/4  4 7  7/8  514360 153.15 35.0020 36.5890 178.40 161.55 155.85 153.15 150.30 148.00 144.70
37.0 1.4567  .4260  .3750 1  1/4  4 7  7/8  514370 169.40 36.5900 38.1760 194.60 177.75 172.15 169.40 166.55 164.25 160.90
38.0 1.4961  .4260  .3750 1  1/4  4 7  7/8  514380 169.40 — — — — — — — — —
The specifications of the Straight Shank Counterbores listed above are only the dimensions that are critical to the application. Please choose the Counterbores that meet your specific needs.

Everyone at Hannibal would like to THANK YOU for the privilege of servicing your Straight Shank Counterbores needs.